Fujitsu ETERNUS DX100 S3 User manual

ETERNUS CLI User's Guide
P2X0-1210-05ENZ0
FUJITSU Storage
ETERNUS DX100 S3/DX200 S3,
ETERNUS DX500 S3/DX600 S3
Disk storage systems,
ETERNUS DX200F
All Flash Array

This page is intentionally left blank.

ETERNUS CLI User’s Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0
3
Preface
This manual describes how to use the Command Line Interface (CLI) to configure and manage the FUJITSU
Storage ETERNUS DX100 S3/DX200 S3 Disk storage system, the FUJITSU Storage ETERNUS DX500 S3/DX600 S3
Disk storage system, or the FUJITSU Storage ETERNUS DX200 All Flash Array (hereinafter referred to as
ETERNUS DX).
This manual is written for standard-level users who are familiar with the basic functions of the ETERNUS DX.
This manual is written for controller firmware version V10L20 or later. Some of the functions and operations
herein may not be supported for firmware version V10L1x or earlier.
Fifth Edition
June 2014
Content and Structure
This manual contains the following eight chapters and appendices:
●Chapter 1 Overview
This chapter introduces the ETERNUS DX Command Line Interface (CLI).
●Chapter 2 Status Display
This chapter explains the commands used for displaying the status details for the ETERNUS DX as a whole,
as well as for various ETERNUS DX components.
●Chapter 3 Configuration Settings and Display
This chapter explains the commands used for Thin Provisioning management, RAID group management,
volume management, and host interface management, these being the basic settings for the ETERNUS
DX.
●Chapter 4 Copy Function Settings and Display
This chapter explains the commands used for Advanced Copy management.
●Chapter 5 System Settings and Display
This chapter explains the commands used for user account management, network management
(Redundant IP/SNMP etc.), date and time/NTP, system configuration (Box ID, Storage system name), power
synchronization, and SSH/SSL security configuration.
●Chapter 6 Information Settings and Display
This chapter explains the commands used to provide performance data and a variety of other information.

Preface
ETERNUS CLI User’s Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0
4
●Chapter 7 NAS Function Setting and Display
This chapter explains the commands related to NAS function management.
●Chapter 8 CLI Original Function
This chapter explains the commands used by some original functions of the CLI environment.
The appendices describe "Error Messages/Error Codes", "List of Supported Commands", "Basic Setting Exam-
ples", "Status List", and "Default Value List".
Latest Information
The information in this manual is subject to change without notice for functionality expansion and
improvement of the ETERNUS DX. The latest version of this manual and the latest information for the
ETERNUS DX are released in the following web-site.
Access the following address if needed.
http://www.fujitsu.com/global/services/computing/storage/eternus/documentation/
Related Manuals
The following manuals contain further relevant information on the ETERNUS DX:
•FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Overview
•FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Site Planning Guide
•FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Design Guide (Basic)
•FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
•FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
•FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Overview
•FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide
•FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Design Guide (Basic)
•FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
•FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic)
•FUJITSU Storage ETERNUS DX200F All Flash Array Overview
•FUJITSU Storage ETERNUS DX200F All Flash Array Site Planning Guide
•FUJITSU Storage ETERNUS DX200F All Flash Array Design Guide (Basic)
•FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
•FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
•FUJITSU Storage ETERNUS DX100 S3/DX200 S3, ETERNUS DX500 S3/DX600 S3 Disk storage systems, ETER-
NUS DX200F All Flash Array Message List
•FUJITSU Storage ETERNUS DX100 S3/DX200 S3, ETERNUS DX500 S3/DX600 S3 Disk storage system
Configuration Guide (NAS)
•FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) ETERNUS DX100 S3/DX200 S3, ETERNUS
DX500 S3/DX600 S3 Disk storage systems, ETERNUS DX200F All Flash Array

Preface
ETERNUS CLI User’s Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0
5
•ETERNUS Web GUI User's Guide (Operation) FUJITSU Storage ETERNUS DX100 S3/DX200 S3, ETERNUS DX500
S3/DX600 S3 Disk storage systems, ETERNUS DX200F All Flash Array
•ETERNUS Web GUI User's Guide (Settings) FUJITSU Storage ETERNUS DX100 S3/DX200 S3, ETERNUS DX500
S3/DX600 S3 Disk storage systems, ETERNUS DX200F All Flash Array
•FUJITSU Storage ETERNUS DX Disk storage systems Configuration Guide -Server Connection- (*1)
*1: Download the necessary manuals to match the environment (such as the server OS and the Fibre Channel card
type) from the specified Web site.
Trademarks
•Microsoft, Windows, and Windows Server are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
•Oracle and Java are registered trademarks of Oracle and/or its affiliates.
•AIX is a trademark of IBM Corp.
•Linux is a registered trademark of Linus Torvalds.
•HP-UX is a trademark of Hewlett-Packard Company in the United States and other countries.
•VMware, VMware logos, Virtual SMP, and VMotion are either registered trademarks or trademarks of
VMware, Inc. in the U.S. and/or other countries.
•VERITAS Volume Manager is a trademark of Symantec Corp. and its affiliated companies.
•The company names, product names and service names mentioned in this document are registered
trademarks or trademarks of their respective companies.

Preface
ETERNUS CLI User’s Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0
6
Additional Information
■Naming conventions
•Oracle Solaris might be described as Solaris, Solaris Operating System, or Solaris OS.
•The following abbreviations are used for Microsoft® Windows Server®.
■Typographic conventions
•Italics are used to show variables such as values and characters that appear in command parameters and
output examples.
Official name Abbreviation
Microsoft® Windows Server®2008 R2 Datacenter
Windows Server 2008 R2
Microsoft® Windows Server®2008 R2 Enterprise
Microsoft® Windows Server® 2008 R2 Standard
Microsoft® Windows Server® 2008 R2 for Itanium-Based Systems
Microsoft® Windows Server® 2008 R2 HPC Edition
Microsoft® Windows Server® 2008 Datacenter
Windows Server 2008
Microsoft® Windows Server® 2008 Enterprise
Microsoft® Windows Server® 2008 Standard
Microsoft® Windows Server® 2008 for Itanium-Based Systems
Microsoft® Windows Server® 2008 HPC Edition
Typeface Meaning Example
[ ] Brackets indicate that the enclosed parameter is optional. [
parameter ]
[ | ] A separator within brackets indicates that only one of the
separated parameters can be specified.
[
parameter | parameter ]
{ | } A separator within braces indicates that only one of the
separated parameters must be specified.
Note that some cases, two or more parameters can be
specified by separating them with a comma.
{ parameter | parameter }

Preface
ETERNUS CLI User’s Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0
7
■ETERNUS DX naming conventions
The following naming conventions are used in this manual for the ETERNUS DX models.
■Symbol conventions
The following symbols are used throughout this manual:
ETERNUS DX models Naming conventions
ETERNUS DX100 S3/DX200 S3 Disk storage system
ETERNUS DX500 S3/DX600 S3 Disk storage system
ETERNUS DX200F All Flash Array
ETERNUS DX
ETERNUS DX100 S3/DX200 S3 Disk storage system ETERNUS DX100 S3/DX200 S3
ETERNUS DX500 S3/DX600 S3 Disk storage system ETERNUS DX500 S3/DX600 S3
ETERNUS DX100 S3/DX200 S3 Disk storage system
ETERNUS DX500 S3/DX600 S3 Disk storage system
ETERNUS DX S3 series
ETERNUS DX60 S2 Disk storage system
ETERNUS DX80 S2/DX90 S2 Disk storage system
ETERNUS DX410 S2/DX440 S2 Disk storage system
ETERNUS DX8100 S2/DX8700 S2 Disk storage system
ETERNUS DX S2 series
ETERNUS DX200F All Flash Array ETERNUS DX200F
This symbol indicates restrictions and cautions for setting up and operating the
ETERNUS DX.
This symbol indicates supplementary information about functions and methods
that may be useful when setting up and operating the ETERNUS DX.

ETERNUS CLI User’s Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0
8
Table of Contents
Chapter 1 Overview 21
1.1 Accessing CLI ..................................................................................................................... 21
1.2 The Command Syntax ....................................................................................................... 22
1.2.1 Command Format ..........................................................................................................................................22
1.2.2 Keywords and Parameters ............................................................................................................................. 22
1.2.3 Drive Enclosure Syntax .................................................................................................................................. 22
1.2.4 Drive Syntax ..................................................................................................................................................23
1.2.5 Alias Name Syntax .........................................................................................................................................23
1.2.6 Thin Provisioning Pool Syntax ........................................................................................................................23
1.2.7 Flexible Tier Pool Syntax ................................................................................................................................ 24
1.2.8 Flexible Tier Sub Pool Syntax .........................................................................................................................25
1.2.9 RAID Group Syntax ......................................................................................................................................... 25
1.2.10 Volume Syntax ...............................................................................................................................................26
1.2.11 Host Syntax ...................................................................................................................................................27
1.2.12 LUN Group Syntax .......................................................................................................................................... 28
1.2.13 Host Response Syntax .................................................................................................................................... 28
1.2.14 Eco-mode Schedule Syntax ............................................................................................................................29
1.2.15 Host Interface Port Syntax .............................................................................................................................29
1.2.16 Port Group Syntax .......................................................................................................................................... 30
1.2.17 Host Group Syntax .........................................................................................................................................30
1.3 Size of Drives and Logical Units ......................................................................................... 31
1.4 Command Auto-complete and History Recall .................................................................... 31
1.5 Command Editing Hotkeys ................................................................................................ 32
1.6 Viewing Command Help .................................................................................................... 33
1.7 Error Message Format ....................................................................................................... 34
1.8 Multiple Sessions .............................................................................................................. 34
1.9 Slave Controller Logins ...................................................................................................... 35
1.10 CLI User Authority ............................................................................................................. 35
1.11 Note for Specifying FTP Server ........................................................................................... 35
1.12 Command Descriptions ..................................................................................................... 36

Table of Contents
ETERNUS CLI User’s Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0
9
Chapter 2 Status Display 37
2.1 Storage System Status ...................................................................................................... 37
show status .............................................................................................................................................. 38
show enclosure-status ..............................................................................................................................39
show fru-ce ...............................................................................................................................................46
show fru-de .............................................................................................................................................. 59
show disks ................................................................................................................................................63
show hardware-information .....................................................................................................................67
Chapter 3 Configuration Settings and Display 69
3.1 RAID Group Management ................................................................................................. 69
3.1.1 RAID Group ....................................................................................................................................................69
show raid-groups ..................................................................................................................................... 70
show raid-group-progress ........................................................................................................................ 73
create raid-group .....................................................................................................................................75
set raid-group .......................................................................................................................................... 77
delete raid-group ..................................................................................................................................... 79
expand raid-group ...................................................................................................................................80
3.1.2 Hot Spares .....................................................................................................................................................82
set global-spare ....................................................................................................................................... 83
release global-spare .................................................................................................................................84
set dedicated-spare ..................................................................................................................................85
release dedicated-spare ........................................................................................................................... 87
3.1.3 Eco-mode Management ................................................................................................................................ 88
show eco-mode ........................................................................................................................................ 89
set eco-mode ...........................................................................................................................................90
show eco-schedule ...................................................................................................................................91
create eco-schedule .................................................................................................................................93
set eco-schedule ...................................................................................................................................... 96
delete eco-schedule .................................................................................................................................99
show eco-raid-group .............................................................................................................................. 100
set eco-raid-group ..................................................................................................................................102
release eco-raid-group ...........................................................................................................................104
3.2 Volume Management ..................................................................................................... 105
3.2.1 Volume ........................................................................................................................................................105
show volumes ........................................................................................................................................ 106
show volume-progress ...........................................................................................................................114
show volume-mapping .......................................................................................................................... 117
create volume ........................................................................................................................................ 119
set volume .............................................................................................................................................125
delete volume ........................................................................................................................................ 127
delete all-volumes .................................................................................................................................128
format volume .......................................................................................................................................130

Table of Contents
ETERNUS CLI User’s Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0
10
expand volume ......................................................................................................................................131
show migration ......................................................................................................................................133
start migration .......................................................................................................................................134
stop migration ....................................................................................................................................... 137
show balancing-thin-pro-volumes .........................................................................................................138
start balancing-thin-pro-volume ............................................................................................................140
stop balancing-thin-pro-volume ............................................................................................................141
start zero-reclamation ............................................................................................................................ 142
stop zero-reclamation ............................................................................................................................143
show volume-qos ...................................................................................................................................144
set volume-qos .......................................................................................................................................146
3.2.2 Flexible Tier Volumes ................................................................................................................................... 148
create flexible-tier-volume .....................................................................................................................149
set flexible-tier-volume .......................................................................................................................... 151
format flexible-tier-volume .................................................................................................................... 153
expand flexible-tier-volume ................................................................................................................... 154
delete flexible-tier-volume .....................................................................................................................155
delete all-flexible-tier-volumes ..............................................................................................................156
start flexible-tier-migration ...................................................................................................................157
3.2.3 ODX Buffer Volume ......................................................................................................................................159
show odx-mode .....................................................................................................................................160
set odx-mode .........................................................................................................................................161
create odx-buffer-volume ....................................................................................................................... 162
set odx-buffer-volume ............................................................................................................................165
delete odx-buffer-volume ......................................................................................................................167
3.2.4 Extreme Cache ............................................................................................................................................. 168
show extreme-cache ..............................................................................................................................169
set extreme-cache ..................................................................................................................................170
set volume-exc .......................................................................................................................................172
3.3 Thin Provisioning Pool Management .............................................................................. 174
3.3.1 Thin Provisioning Pool .................................................................................................................................174
show thin-provisioning ..........................................................................................................................176
set thin-provisioning ..............................................................................................................................177
show thin-pro-pools ............................................................................................................................... 179
show thin-pro-pool-progress .................................................................................................................. 181
create thin-pro-pool ............................................................................................................................... 183
set thin-pro-pool ....................................................................................................................................186
delete thin-pro-pool ...............................................................................................................................187
expand thin-pro-pool .............................................................................................................................188
format thin-pro-pool ..............................................................................................................................190
3.3.2 Thin Provisioning Pool Eco-mode Management .......................................................................................... 191
show eco-thin-pro-pool .......................................................................................................................... 193
set eco-thin-pro-pool .............................................................................................................................194
release eco-thin-pro-pool .......................................................................................................................196