Fuller Brush SPIFFY Maid FB-SPFM.2 User manual

1
Owner’s Manual
For The Fuller Brush
SPIFFY Maid BROOM Vacuum
Thank you for purchasing this
Fuller Brush Broom Vacuum.
To ensure the best results, please read this
manual and keep it for reference.
Model
FB-SPFM.2

1
Polarization Instructions...............................................................3
Parts Identification ..................................................................4
Vacuum Description ............................................................... 5-6
Assembling the Vacuum ..............................................................7
Operating the Vacuum ...............................................................8
Emptying the Dust Cup ...............................................................9
Cleaning the Dust Cup ..............................................................10
Replacing the HEPA Media Filter .......................................................11
Cleaning the Foam Filters ............................................................11
Troubleshooting...................................................................12
Warranty .......................................................................13
Index
The model and serial numbers of this product may be found on the back side of the unit. You should register your
vacuum online at www.FullerBrushVacuums.com as soon as possible for your protection. Also note the model and serial
numbers of your unit in the spaces provided below, and retain this book as a permanent record of your purchase.
Model Number _____________________________________________________________________________________
Serial Number ______________________________________________________________________________________
Date Purchased _____________________________________________________________________________________
Your Fuller Brush vacuum cleaner is a product of high-quality materials and superior workmanship. We urge you to
read these operating instructions carefully before you use this vacuum cleaner in order to obtain the full performance and
satisfaction it can offer you.
Before you plug in your Fuller Brush vacuum cleaner charger, make sure the voltage indicated on the rating plate
located on the back of the charger is the same as your local supply.
Customer’s Record
Save These Instructions

2
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the
following:
READ ALL INSTRUCTIONS BEFORE
USING THIS APPLIANCE
The manufacturer cannot accept responsibility for damage caused
when the appliance is not used according to the instructions, or for
uses other than those for which it was intended.
This vacuum is intended for household use only.
To reduce the risk of fire, electric shock or injury:
• Do not leave appliance when plugged in.
Unplug from outlet when not in use and
before servicing.
• WARNING: ELECTRIC SHOCK COULD OCCUR IF
USED OUTDOORS OR ON WET SURFACES.
• Do not allow to be used as a toy. Close
attention is necessary when used by or near
children.
• Use only as described in this manual. Use only
manufacturer’s recommended attachments.
• Do not use with damaged cord or plug, or if
appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped
into water.
• Do not pull or carry by cord, use cord as a
handle, close a door on the cord, or pull cord
around sharp edges or corners. Do not run
appliance over cord. Keep cord away from
heated surfaces.
• Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
• Do not handle plug or appliance with
wet hands.
• Do not put any object into openings. Do not
use with any opening blocked; keep free of
dust, lint, hair and anything that may reduce
air flow.
• Keep hair, loose clothing, fingers and all parts
of body away from openings and moving
parts.
• Do not pick up anything that is burning or
smoking, such as cigarettes, matches or hot
ashes.
• Do not use without the dust cup and filters
in place.
• Turn off all controls before unplugging.
• Do not use to pick up flammable or
combustible liquids such as gasoline or use in
areas where they may be present.
• Do not attempt to service the unit while
appliance is plugged in.
• Do not use vacuum to pick up water or any
wet materials.
• Use extra care when cleaning on stairs.
SAVE THESE INSTRUCTIONS.
WARNING:

3
Two-Wire Polarized Plug
To reduce the risk of electric shock, this product is equipped with a polarized alternating
current line plug (a plug having one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug still does not fit, contact a
qualified electrician to replace the obsolete outlet. Do not defeat the safety purpose of
the polarized plug.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to
cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to
cause birth defects or other reproductive harm.
Two-Wire Polarization Instructions

4
• Genuine Fuller Brush HEPA Media and Foam Filter Set
Part # FBSPF-HEPA
Parts Identification
Replacement Filters
Handle
Telescopic Wand
Extension Button
Telescopic Wand
Crevice Tool Caddy
2-Speed On/Off Switch
Carry Handle
Dust Cup Latch
(to remove dust cup from
the vacuum body)
Dust Cup Release Button
(to empty dust cup)
Floor Nozzle
Floor Nozzle Release Button
(to remove floor nozzle)
Main Body
Cyclonic Filter Holder
Assembly
Dust Cup
HEPA Media
Filter Assembly
Power Cord
Foam Filters
Crevice Tool
Rotating Cord Hook

5
Vacuum Description
Fig. 1 Fig. 2
Fig. 3
Fig. 4
Rotating Cord Hook
The upper cord hook rotates to allow
quick access to the power cord (Fig.1).
2-Speed On/Off Switch
Push the switch to the “Low Speed”
position indicated by the “I”. Push
the switch to the “High Speed”
position indicated by the “II” when
more power is required. Push the
switch to the “Off” position indicated
by the “O” when not in use (Fig. 2).
Telescopic Wand
While pressing the button forward,
shorten or lengthen the telescopic
wand to the desired length (Fig. 3).
Cord Storage Hooks
Turn the upper cord hook to the
upright position and wind the
power cord around the cord
storage hooks when storing the
vacuum (Fig. 4).

6
Floor Nozzle
Attach the floor nozzle to the end of the neck
of the dust cup for cleaning bare floors (Fig. 1).
Crevice Tool
The cleaning tool caddy holds the crevice
tool. This tool can be attached to the end
of the main unit in place of the floor nozzle
for cleaning along baseboards and small
spaces (Fig. 2).
Fig. 1
Fig. 2
Vacuum Description

7
Fig. 1
Fig. 2
Fig. 3 Fig. 4
Assembling the Vacuum
NOTE: Always unplug the vacuum before
assembling or removing accessories.
1. Insert the telescoping wand into the top of
the main unit. Ensure the button on the wand
locks into place (Fig. 1).
2. Attach the tool caddy to the telescoping
wand, then insert the crevice tool into the
caddy (Fig. 2).
3. Attach the floor nozzle to the neck of the dust
cup ensuring the button on the nozzle neck
locks into place (Fig. 3).
4. Push the button on the telescopic wand forward
to shorten or lengthen the wand to the desired
length (Fig. 4).

8
Operating the Vacuum
Fig. 1
Fig. 2
Fig. 4
Fig. 3 Fig. 5
1. Rotate the top cord hook to
release the power cord from the
cord storage hooks (Fig. 1).
2. Extend the telescopic wand to the
desired length (Fig. 2).
3. If it is not already on the vacuum,
attach the floor nozzle to the end
of the dust cup for cleaning bare
floors or area rugs (Fig. 3).
4. Insert the power plug into a wall
outlet and press the on/off switch
located on top of the main unit to
the desired speed (Fig. 4).
5. Replace the floor nozzle with
the crevice tool for cleaning
baseboards, ceilings and small
spaces (Fig. 5).

9
Emptying the Dust Cup
Fig. 1
Fig. 2
Warning: Empty the dust cup before the contents
reach the bottom of the cyclonic filter assembly.
Overfilling the dust cup may cause dirt and debris
to clog the filter and cause loss of suction.
Warning: Always unplug the vacuum from the
electrical outlet before removing the dust cup.
1. Turn the vacuum off and unplug the power cord
from the wall outlet.
2. While holding the vacuum over a trash can, push
the release button at the bottom of the dust cup.
The base of the dust cup will drop down, releasing
the dirt (Fig. 1).
3. Close the bottom of the dust cup, ensuring it locks into
place (Fig. 2). Resume vacuuming.

10
Cleaning the Dust Cup
1. Push the dust cup latch to remove
the dust cup from the vacuum (Fig.1).
2. Remove the floor nozzle from
the dust cup by pressing the red
button on the nozzle neck and
pulling the floor nozzle out of
the dust cup (Fig. 2).
3. Remove the cyclonic filter holder
(Fig. 3).
4. Shake out remaining dust and
rinse with water. Make sure all
pieces are completely dry before
replacing in the vacuum.
5. Replace the cyclonic filter holder.
6. Replace the dust cup onto the
vacuum (Fig. 4). Then replace
the floor nozzle and resume
vacuuming (Fig. 5).
Fig. 1
Fig. 3
Fig. 2
Fig. 4
Fig. 5

11
Replacing the HEPA Media Filter
Cleaning the Foam Filters
Warning: Always unplug the vacuum from the
electrical outlet before removing the filters.
1. Remove the filter cover by pushing in on the tab
and rotating the cover out (Fig. 1).
2. Remove the filter by grasping the filter grips and
pulling the filter straight out of the machine (Fig. 2).
3. Replace with a new filter (do not wash and reuse).
4. Replace the filter cover by inserting the two tabs
in first then snapping the cover in place with the
large tab.
Fig. 1
Fig. 2
Fig. 3 Fig. 4
Fig. 2
Pre-Motor Filter
1. Push the dust cup latch to remove the dust cup from the
vacuum (Fig. 1).
2. Remove the gray foam filter from the frame located at
the base of the main body (Fig. 2).
3. Shake or tap the filter to remove excess dust or replace
with a new filter (do not wash or reuse).
4. Replace the dust cup onto the vacuum (Fig. 4).
High Flow Dust Bin Filter
1. Push the dust cup latch to remove the dust cup from the
vacuum (Fig. 1).
2. Remove the white High Flow filter by grasping the top of
the filter and pulling straight up (Fig. 3).
3. Shake or tap the filter to remove excess dust or replace
with a new filter (do not wash or reuse).
4. Replace the dust cup onto the vacuum (Fig. 4).
Pre-Filter
1. Push the dust cup latch to remove the dust cup from the
vacuum (Fig. 1).
2. Remove the cyclonic filter holder (Fig. 5).
3. Remove the white High Flow filter by grasping the top of
the filter and pulling straight up (Fig. 3).
4. Remove the black pre-filter from the inside of the
cyclonic filter holder (Fig. 6).
5. Shake or tap the filter to remove excess dust or replace
with a new filter (do not wash or reuse).
6. Replace the pre-filter and the High Flow filter in the cyclonic filter holder.
7. Replace the dust cup onto the vacuum (Fig. 4).
Warning: Do not put filters in the dishwasher or clothes washing machine.
Fig. 1
Fig. 5 Fig. 6

12
Problem Check Point Possible Solution
Suction power is weak. • Dust cup
• Floor nozzle/
Crevice tool
• Filters
• If the dust cup is full, empty it.
• If clogged, remove the object.
• Clean or replace filters.
The vacuum does not work. • Power cord Insert the power plug firmly into an electrical
outlet.
Sudden loss of power. • Thermal reset Turn off vacuum and unplug from electrical
outlet. Let vacuum cool down for 60 minutes
before turning back on. Check for clogs.
Empty dust container.
Dirt and debris are blowing
through exhaust vent.
• Filters Make sure all filters are clean, dry and
installed correctly.
All other service should be performed at a Fuller Brush Vacuums service center.
• Keep machine and all accessories clean and in good operating condition.
• Replace HEPA media filter and clean foam filters frequently if vacuuming fine powders
such as flour or drywall dust.
• Always use genuine filters and parts, as use of other products may result in poor cleaning
or filtration performance. Fuller Brush Vacuums filtration products are designed for
maximum performance.
• Store machine carefully in a dry area.
• For optimum cleaning performance and safety, follow your owner’s manual.
Troubleshooting
For Best Performance

13
Warranty
What is Covered:
This warranty covers any defects in material and workmanship in your new Fuller Brush vacuum.
How Long Coverage Lasts:
Warranty coverage for the Fuller Brush vacuum lasts one year. Household models used
commercially are only warranted for 90 days.
What is Not Covered:
• Damage to the vacuum which occurs from neglect, abuse, alterations, accident,
misuse or improper maintenance.
• Normal replacement items: disposable filters.
What Fuller Brush Will Do:
This warranty provides, at no cost to you, all labor and parts to keep this vacuum
in correct operating condition during the warranted period.
How to Get Service:
Warranty service can only be obtained by presenting the vacuum to the Fuller Brush
Vacuum Service Center. A proof-of-purchase and product serial number will be
required before service is rendered.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY AND ALL OTHER WARRANTIES
WHETHER WRITTEN, ORAL, EXPRESSED OR IMPLIED (INCLUDING ANY WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE). THIS WARRANTY
DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
How State Law Applies:
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
Register your warranty online at www.FullerBrushVacuums.com

Purchased from:
Store Name
Address
City, State, Zip
Telephone
The model and serial number of this product may be found on the back of the unit. Register
your Fuller Brush vacuum online at www.FullerBrushVacuums.com as soon as possible for
your protection. Also note the model and serial numbers of your unit in the spaces provided
below, and retain this book as a permanent record of your purchase.
Model Number ___________________________________________________________________
Serial Number ___________________________________________________________________
Date Purchased __________________________________________________________________
keep this for your records…
Owner’s Warranty Information

15
Manual del usuario
Para la aspiradora barredora
SPIFFY Maid de Fuller Brush
Gracias por comprar esta
aspiradora barredora de Fuller Brush.
Para garantizar los mejores resultados, lea este
manual y guárdelo para referencia.
Modelo
FB-SPFM.2

1
Instrucciones de polarización...........................................................3
Identificación de las piezas ............................................................4
Descripción de la aspiradora .........................................................5-6
Ensamblaje de la aspiradora...........................................................7
Funcionamiento de la aspiradora ........................................................8
Vaciado del depósito de polvo .........................................................9
Limpieza del depósito de polvo ........................................................10
Reemplazo del filtro HEPA............................................................11
Limpieza de los filtros de esponja .......................................................11
Resolución de problemas ............................................................12
Garantía .......................................................................13
Índice
El modelo y los números de serie de este producto se encuentran en la parte posterior de la unidad. Debe registrar su
aspiradora en línea en www.FullerBrushVacuums.com tan pronto como sea posible para su protección. Escriba también
el modelo y los números de serie de su unidad en los espacios que se proporcionan a continuación y guarde este
folleto como un registro permanente de su compra.
Número de modelo _________________________________________________________________________________
Número de serie ____________________________________________________________________________________
Fecha de compra ___________________________________________________________________________________
Su aspiradora de Fuller Brush es un producto con materiales de alta calidad y manufactura superior. Le recomendamos
que lea estas instrucciones de funcionamiento con atención antes de usar esta aspiradora para así obtener el mejor
rendimiento y satisfacción que puede ofrecerle.
Antes de conectar el cargador de su aspiradora de Fuller Brush, asegúrese de que el voltaje indicado en la placa de
características ubicada en la parte posterior del cargador sea igual al de su suministro local.
Registro del cliente
Conserve estas instrucciones

2
INSTRUCCIONES DE SEGURIDAD
IMPORTANTES
Al utilizar un electrodoméstico siempre se deben seguir las precauciones básicas, incluidas las siguientes:
LEA TODAS LAS INSTRUCCIONES ANTES DE
USARESTE APARATO
El fabricante no acepta la responsabilidad por los daños
causados cuando el electrodoméstico no se utiliza de
acuerdo con las instrucciones o para otros usos que no
sean aquellos para los que fue fabricado.
Esta aspiradora está diseñada solo para uso
doméstico.
Para reducir el riesgo de incendio, descarga eléctrica o lesión:
• No se aleje del aparato mientras esté
conectado. Desenchúfelo del tomacorriente
cuando no esté en uso y antes de realizar
tareas de mantenimiento.
• ADVERTENCIA: PODRÍA PRODUCIRSE UNA
DESCARGA ELÉCTRICA SI SE UTILIZA AL AIRE
LIBRE O EN SUPERFICIES MOJADAS.
• No permita que se utilice como un juguete.
Preste especial atención cuando es utilizado
por niños o cerca de ellos.
• Utilícelo solamente de acuerdo con lo descrito
en este manual. Utilice solamente los accesorios
recomendados por el fabricante.
• No lo utilice si el cable o la clavija tienen daños
o si el aparato no funciona como debería, se
cayó, está dañado, lo dejaron a la intemperie
o cayó al agua.
• No lo jale ni lo desplace tirando del cable, no
utilice el cable como manija, no permita que
se cierre ninguna puerta sobre el cable, ni
jale el cable alrededor de bordes o esquinas
pronunciadas. No pase el electrodoméstico
encima del cable. Mantenga el cable alejado
de superficies calientes.
• No jale del cable para desenchufar el aparato.
Para desconectarlo, tome la clavija, no el cable.
• No manipule el enchufe ni el aparato con las
manos mojadas.
• No coloque ningún objeto en las aberturas.
No lo utilice si alguna abertura está obstruida;
manténgalo sin polvo, pelusa, cabello y cualquier
otra cosa que pueda reducir el flujo de aire.
• Mantenga el cabello, la ropa suelta, los dedos
y todas las partes del cuerpo alejados de las
aberturas y componentes móviles.
• No aspire nada que esté encendido o emita
humo, como cigarrillos, fósforos o cenizas
calientes.
• No lo utilice sin haber colocado antes el
depósito de polvo y los filtros.
• Apague todos los controles antes de
desenchufarlo.
• No lo utilice para recoger líquidos combustibles
o inflamables como gasolina, ni lo utilice
en áreas donde estos líquidos puedan estar
presentes.
• No intente realizar el mantenimiento o la limpieza
de la unidad cuando el aparato esté enchufado.
• No use la aspiradora para aspirar agua o
materiales mojados o húmedos.
• Tenga especial cuidado al limpiar escaleras.
CONSERVE ESTAS INSTRUCCIONES.
ADVERTENCIA: