Furinno 11192 User manual

Assembly Instruction
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
Customer Support
NEED HELP? For help with assembly, or if you are missing a
part, please call Furinno Customer Service, 1-773-299-8111
from Mon-Fri, 9am-5pm (CST) or email: [e-mail]
www.furinno.com
7.1 Attach Panel(G)to Panel(A)using Screw(1).
7.2 Attach Panel(D)to Panel(G)and tighten
Cam-Lock(9)using screwdriver.
7.3 Tighten Top Cap(7)to Pole (4).
STEP 7
5.1 Attach Panel(E)to Panel(C)using Screw(1).
5.2 Fix Leg(6)to the bottom of Panel(E)and
tighten it to Long Pole(4).
STEP 5
6.1 Attach another Panel(E)to Panel(C)using
Screw(1).
6.2 Attach Short Pole(5)and tighten it.
STEP 6
Recommended Maximum Weight
Furinno Efficient Home Laptop Notebook
Computer Desk
1119220160420
MODEL : 11192
39.6”(W) x 33.6”(H) x 15.6”(D)DIMENSION :
20
*Unit in Pound(lbs)
10
Tools Required
Recomm. 1 Person
(6)x2pcs
(5)x2pcs
(1)x2pcs
(4)x2pcs
(1)x2pcs
(7)x2pcs
(1)x2pcs
Approx. 30 minutes
(5)

STEP 1
1.1Insert Dowel(2)to Panel(B)(C).
1.2Insert Cam-Lock Nut(9)into Panel(B)(C)(G).
Note: Arrow on Cam-Lock Nut(9)should be
pointing towards hole.**
4.1 Attach Panel(F)&(H)to Panel(B)&(C)using
Screw(1).
4.2 Install Nail Leg(3)to the bottom of L/R
Side Panel(B)&(C)using hammer.
STEP 4
STEP 3
Attach Panel(B)(C)toPanel(A)and tighten Cam-Lock
Nut(9)uisng screwdriver.
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
14pcs
4pcs
4pcs
A 1pcs
Top Panel
Nail Leg
No Hardware List Qty No QtyParts List
Screw
Plastic Dowel
4
5
6
2pcs
2pcs
2pcs
Leg
Long Pole
Short Pole
7
8
9
2pcs
6pcs
6pcs
Cam-Lock Nut
Top Cap
Cam-Lock Screw
B
C
1pcs
1pcs
Right Side Panel
Left Side Panel
D
E
F
1pcs
2pcs
1pcs
Back Panel
Side Top Panel
Shelf Panel
G
H
1pcs
2pcs
Skirt Panel
Center Panel
STEP 2
Screw Cam-Lock Screw(8)into the pre-drilled
holes on Panel(A)&(D).