Furinno 11189 User manual

Assembly Instruction
Customer Service
Tel/Fax: [phone]
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: [email protected]
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
www.furinno.com
Approx. 30 minutes
Recomm.2 Person
Tools Required
Attach Back Panel(I)to assembled unit with
Power Pin(6).
STEP 5
Attach Handle(4)on Door Panel using Short Screw(5).
STEP 6
Recommended Maximum Weight
Furinno Pasir 3 Tier Shelf w/3 Door
w/Round Handle
1118920140409
MODEL : 11189
23.6”(W) x 31.5”(H) x 9.4”(D)DIMENSION :
(6)x 22pcs
*Unit in Pound(lbs)
15
15
15

1
2
3
16pcs
6pcs
3pcs
A 2pcsL/R Side Panel
Magnet/Screw
Screw
Door Support
4
5
6
3pcs
3pcs
22pcsPower Pin
7 12pcsWooden Dowel
Handle
Short Screw
B
C
1pcs
1pcsSecond Shelf Panel
Top Panel
D
E
F
1pcs
1pcs
3pcsCenter Side Panel
Third Shelf Panel
Bottom Panel
G
H
2pcs
1pcsRight Door Panel
I 1pcsBack Panel
Left Door Panel
STEP 3
Attach Panel(H),(F),(D)with completed unit
in Step 2 using Screw(1).
Attach Panel(G),(F),(E)with completed unit
in Step 3 using Screw(1).
STEP 4
A
A
B
C
D
E
F
F
F
H
I
G
G
G
H
B
C
D
F
(1)x 8pcs
(1)x 4pcs
(1)x 4pcs
2.1 Attach L/R Side Panel(A)and Top Panel(B)
using Screw(1).
2.2 Connect Panel(G),(F),(C)with completed
unit in Step 2.1.
STEP 2
1.1 Attach Screw(3B)and Door Support(2)on
L/R Door Panel(G,H).
1.2 Attach Magnet(3A) on Top Panel(B)and
Shelf Panel(C,D).
1.3 Install Wooden Dowel(7)on Center Side
Panel(F).
Note: 1)Enlarge pre-drilled hole with Screw
before attach with Magnet(3).
2)Iron plate on Magnet(3A)should be
pointing toward arrow direction.
STEP 1
7
No Hardware List Qty No QtyParts List
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.