Furinno 13239 User manual

Assembly Instruction
Customer Service
Tel/Fax: [phone]
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: [email protected]
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
www.furinno.com
Attach Bottom Panel(B)to Left/Right
Support Panel(D)&(E)with Large Screw(4).
STEP 4
Attach Square Leg(5)to Bottom Panel(B)
with Small Screw(3).
STEP 5
Upright the unit.
Unfold Bin(7) and slide it into storage.
STEP 6
Recommended Maximum Weight
Furinno Simplistic TV Entertainment
Center with Bin Drawers
1323920140717
MODEL : 13239
31.5”(W) x 14.9”(H) x 12.8”(D)DIMENSION :
*Unit in Pound(lbs)
40
15
10
Tool RequiredTool RequiredNo Tools Required
Recomm. 1 PersonRecomm. 2 Person
Approx. 5 minutesApprox. 10 minutesApprox. 15 minutesApprox. 20 minutesApprox. 30 minutes

STEP 3
Attach Shelf Panel(C)to Left Support Panel(D)with
Large Screw(4), as shown.
STEP 2
Attach Panel(D)&(E)to Panel(A)and tighten Cam-Lock Nut(2).
STEP 1
1.1 Fix Cam-Lock Screw(1)into Panel(A), as shown.
1.2 Insert Cam-Lock Nut(2)& Dowel(5)into the pre-drilled holes on Panel(D)&(E).
*Arrow on Cam-Lock Nut(2)should be pointing towards hole.
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
6pcs
6pcs
12pcs
A 1pcs
Top Panel
Small Screw
No Hardware List Qty No QtyParts List
Cam-Lock Screw
Cam-Lock Nut
4
5
6
20pcs
12pcs
4pcs
Square Leg
7 1pcs
Non-Wooven Bin
Large Screw
M6x20mm Dowel
B
C
1pcs
1pcs
Shelf Panel
Bottom Panel
D 4pcs
Left Support Panel
D 2pcs
Right Support Panel
Arrow towards hole
1
2