Furinno 11257 User manual

Assembly Instruction
Customer Service
Tel/Fax: [phone]
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: [email protected]
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
www.furinno.com
Attach Pole(1)to Panel(C)and tighten it with Top Cap(4).
STEP 5
Recommended Maximum Weight
Furinno Turn-N-Tube No Tools
Entertainment Center
1125720140417(2)
MODEL : 11257
41.5”(W) x 22.9”(H) x 11.6”(D)DIMENSION :
15
*Unit in Pound(lbs)
40
Fix Round Leg(5)to Panel(D)and tighten it.
STEP 6
(1)x4pcs
(B)
(C)
(A)
(4)x4pcs
(5)x8pcs
(C)
(B)
(C)
(A)
(C)
(D)
(D)
unfinished surface
unfinished surface
unfinished surface
unfinished surface
unfinished surface
unfinished surface
Tool Required
Recomm. 1 Person
15
15
15
15
Approx. 20 minutes

STEP 1
Install Insert Cap(3)into Panel(A)using
rubber mallet.
Attach Pole(2)to Panel(A)and tighten it.
STEP 2
STEP 3
Attach Pole(2)to Panel(C)and tighten it. Attach Pole(2)to Panel(B)and tighten it.
STEP 4
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
4pcs
12pcs
4pcs
A 1pcs
Top Panel(15mm)
Insert Cap
No Hardware List Qty No QtyParts List
Long Pole
Short Pole
4
5
4pcs
8pcs
Top Cap
Round Leg
B
C
1pcs
2pcs
Front Panel(15mm)
Bottom Panel(12mm)
D 2pcs
Side Panel(12mm)
(3)x4pcs
(A)
(2)x4pcs
(2)x4pcs
(C)
(C)
(2)x4pcs
unfinished surface
(A)
unfinished surface
(B)
unfinished surface
(A)
unfinished surface
unfinished surface
(C) (A)
unfinished surface
unfinished surface