Furinno 12078 User manual

Assembly Instruction
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
Recommended Maximum Weight
Furinno Turn-N-Tube 4-Tier Corner
Display Rack Multipurpose Shelving Unit
1207820180317
MODEL : 12078
*Unit in Pound(lbs)
10
10
10
10
No Tools Required
Recomm. 1 Person
Customer Support
www.furinno.com
NEED HELP? For replacement requests or product inquiries,
please contact our Customer Service Team by emailing us at
[email protected]. Thank you for selecting Furinno!
Approx. 10 minutes
In order to prevent product tip over, please follow the instruction below to secure the unit to the wall.
STEP 3
1SET
Hardware List Qty
1/4”
DRILL BIT
CABLE TIE
WALL

USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
9pcs
4pcs
4pcs
A 3pcs
Shelf Panel
Round Leg
No Hardware List Qty No QtyParts List
Long Pole
Top Cap
B 1pc
Bottom Panel
1Set
Hardware List Qty
1/4”
DRILL BIT
STEP 1
Attach Top Panel (A) and tighten Top Cap (2),
as shown:
STEP 2
Long Pole - 9pcs
Top Cap - 1pc
Round Leg - 4pcs
Top Cap - 3pcs
A
FINISHED
SURFACE
STEP 1.1
STEP 1.2
STEP 1.3
1.1 Attach Long Pole (1), Top Cap (2) and
Round Leg (3) to Bottom Panel (B).
1.2 Attach Shelf Panel (A) and tigthen Long
Pole (1) , as shown:
finished surface
finished
surface
finished surface
A
A
B
A
A
A
B
1.3 Attach Shelf Panel (A) and tigthen Long
Pole (1) , as shown: