Furinno 99940 User manual

9994020180402
1
its Space. its Budget
Customer Support
www.furinno.com
NEED HELP? For replacement requests or product inquiries,
please contact our Customer Service Team by emailing us at
[email protected]. Thank you for selecting Furinno!
Tool RequiredTool Required
Approx. 30 minutes
Assembly Instruction
Furinno Basic 3x2 Bookcase Storage w/Bins
MODEL : 99940
Recomm. 2 Person
4
Recommended Maximum Weight
15
10
10
10
*Unit in Pound(lbs.)
WARNING:
>This unit has been designed to
support the maximum loads shown.
Exceeding these load limits could
cause sagging, instability, product
collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
> Put heavier items on lower shelves.
STEP 15
STICKER 1 SET
6
6
6
ASSEMBLED UNIT
STEP 14
STEP 13
ASSEMBLED UNIT 3 PCS
ASSEMBLED UNIT
ASSEMBLED UNIT
TURN 90°
STEP 12
STEP 11 4
BACK PANEL 1 PC
H
NAIL 16 PCS
4
H
UNFINISHED EDGE
x16
BIN 3 PCS
5
5 x3
TOOL REQUIRED
ASSEMBLED UNIT
UNFINISHED
SURFACE

EXPLODED VIEW
A
B
C
D
E
F
F
F
F
G
H
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, soft and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
PARTS LIST
TOP PANEL 1 PC
A
SHELF PANEL 1 PC
B
CENTER PANEL 4 PCS
F
SKIRT PANEL
G
BACK PANEL 1 PC
H
1 PC
BOTTOM PANEL 1 PC
C
LEFT SIDE PANEL
D
RIGHT SIDE PANEL 1 PC
E
1 PC
HARDWARE LIST
SCREW 12 PCS
1 2
34
56
LONG DOWEL 4 PCS
NAIL 16 PCSSHORT DOWEL 14 PCS
BIN 3 PCS STICKER 1 SET
STEP 10
STEP 9
LEFT SIDE PANEL 1 PC
D
SCREW 6 PCS
1
1
1
1
D
TURN 180°
TOOL REQUIRED
ASSEMBLED UNIT
ASSEMBLED UNIT
STEP 7
STEP 8
SKIRT PANEL 1 PC
G
G
1
1
1
RIGHT SIDE PANEL 1 PC
E
FINISHED EDGE
E
SCREW 6 PCS
1
TOOL REQUIRED
ASSEMBLED UNIT
ASSEMBLED UNIT
C
FINISHED SURFACE
F
F
FINISHED EDGE
2
2
2
2
3
3
3
3
CENTER PANEL 2 PCS
F
LONG DOWEL 4 PCS
2
SHORT DOWEL 4 PCS
3
STEP 1
SHELF PANEL 1 PC
B
STEP 2
B
2
TOOL REQUIRED
FINISHED EDGE
ASSEMBLED UNIT
LONG DOWEL
UNFINISHED
SURFACE
STEP 3
STEP 4
CENTER PANEL 2 PCS
F
F
F
FINISHED EDGE
SHORT DOWEL 10 PCS
3
TOP PANEL 1 PC
A
A
FINISHED EDGE
STEP 5
STEP 6
BOTTOM PANEL 1 PC
C
C
FINISHED EDGE
3
3
3
3
G
SKIRT PANEL 1 PC
G
TOOL REQUIRED
ASSEMBLED UNIT
ASSEMBLED UNIT
ASSEMBLED UNIT
F
3
3
F
3
3
F
CENTER PANEL 2 PCS
SHORT DOWEL
UNFINISHED
SURFACE
UNFINISHED
SURFACE
3