Furinno FNAJ-11068 User manual

MODEL:
Furinno Boyate Folding Multifunction Table
FNAJ-11068
Step 7
Install Foldable Top Panel(B) to Fixed Top
Panel(A) with Hinge(4).
Step 8
8.1 Insert pin support into the desired holes
on Center Panel(E) and R-Side Panel(D).
Place Shelf Panels(I) on the Pin Supports.
8.2 Paste protective pads(9) on L/R-Side
Panels to prevent the Foldable Top
Panel from directly hitting side panels,
as shown.
A
A
B
B
B
D
E
F
G
G
H
I
30kg
(4)x 6pcs
(9)x 4pcs
(1)x 24pcs
(10)x 4pcs
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
Recommended Maximum Weight
www.furinno.com
Assembly Instruction
Recomm. 2 Person
Approx. 60 minutes
Tools Required
Customer Service
Tel/Fax: [phone]
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: [email protected]
8.2

(2)x 4pcs
(3)x 4pcs
1
2
3
4
5
6
7
8
9
10
50pcs
20pcs
20pcs
6pcs
2pcs
4pcs
8/2pcs
2pcs
4pcs
4pcs
A
B
C
D
E
G
H
I
1pcs
2pcs
1pcs
1pcs
1pcs
2pcs
2pcs
1pcs
1pcs
Step 1
Attach 2 pcs of Back Panel(F) to Center Panel(E)
with Wood dowels(2) and Camlock Screw/Nuts(3).
Step 3
Attah L/R-Side Panels (C)(D) to the finished
products from Step 2 with Wood Dowels(2) and
Camlock Screw/Nuts(3), as shown:
Step 5
Install Pull Knob(5), Stopper(7), Caster(8) to
Door Panel(G).
Step 6
Attach Door Panel(G) to Center Panel(E) with
Door Hinge(6).
Step 4
Attach Top Panel(A) to L/R-Side Panels(C)(D)
and Center Panel(E) with Wood Dowels(2) and
Camlock Screw/Nuts(3).
Step 2
Turn the unit upside down.
Attach Bottom Panel(H) to Center Panel(E) with
Wood Dowels(2) and Camlock Screw/Nuts (3).
Fixed Top Panel
Foldable Top Panel
Pin Support
Screw
Wood Dowel
Camlock Screw/Nut
Pull Knob
Hinge
Stopper
Caster
Protective Pad
L-Side Panel
R-Side Panel
Center Panel
Back Panel
Door Panel
Bottom Panel
Shelf Panel
(3)x 8pcs
Door Hinge
A
BB
C
C
D
E
E
F
F
F
F
F
G
G
H
I
Note: If Door Panel(G) does
not align with Side Panels,
you may adjust it with the
screws on Door Hinge, as
shown above.
Adjustable
Screws
FF
H
D
D
HH
H
FF
C
C
A
GX2
G
E
(2)x 2pcs
(7)x 1pcs
(6)x 4pcs
(1)x 24pcs
(5)x 1pcs
(8)x 1pcs
(1)x 1pcs
(3)x 2pcs
(3)x 6pcs
(2)x 8pcs
(2)x 6pcs
No Hardware List Qty No QtyParts List
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
unfinished
surface
F
unfinished
surface
E
E
E
D