Furniture of America CM-AC6915 User manual

EASY
The Assembly Rating is a 5-point system that
shows the degree of effort needed in
assembling a specific product (with 1 being
easy and 5 being difficult). For some
products, two persons are recommended.
CM-AC6915
Assembly Instructions
Tools Required for Assembly:
Rev.14-06-05
Page 1 of 5
DIFFICULT
ASSEMBLY RATING
Allen Wrench (Included)

Page 2 of 5

Parts List
#1 x 1 pc
Column
#2 x 1 pc
Seat Plate
#3 x 1 pc
Base
#A x 4 pcs
Bolt M6x14
Before you begin, please read Page 2
of “Assembly and Care Advice”.
And remember, do not tighten until
each step is completed or instructed.
MD
Page 3 of 5
#4 x 1 pc
Seat
#5 x 1 pc
Base Ring
#B x 1 pc
Allen Wrench

Page 4 of 5
Align the seat plate (#2) with the pre-drilled holes on the
bottom of the seat (#4). Insert 4 bolts (#A) through the seat
plate (#2) and secure those bolts using the Allen wrench (#B)
to lock them with the seat (#4).
#A x 4 pcs
Insert the base ring (#5) onto the top of the base (#3).
Then insert the column (#1) into the base ring (#5).
Turn right (clockwise) to tighten
#2
#4

Page 5 of 5
Check to make sure all parts are secured and the
chair is stable.
Place the assembled seat/seat plate from Step 2
over the top of the assembled column/base
assembly from Step 1.
#4
ASSEMBLY IS COMPLETED