Furniture of America CM-BK606 User manual

(Included)
Allen Wrench
Phillips
Screwdriver
(Not Included)
CM-BK606
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
ASSEMBLY RATING
EASY DIFFICULT
1 / 13
TOOLS REQUIRED
MODEL #
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PST)
Questions?
4 - People
Recommended
VERSION # 20-02-20

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX13

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX13

4/ 13

#1
Front
Guardaril Bars
Back
side Rail
Top Side Panel (R) Bottom Side Panel Font side Rail
Back
Guardaril Bars
Ladder(L)
1pc #2 1pc #3 2pcs #4 2pcs
#5 2pcs
Ladder(R)
#7 2pcs
#6 2pcs
#10 1pc #11 1pc
#8 12pcs
#9 2pcs #12 3pcs
Top Side Panel (L)
Ladder Steps
Guardaril
Reinforce Bars
Slats
BUNK BED
CM-BK606
5 / 13

BOLT Ø1/4"x 4-1/8" BOLT Ø1/4"x 1-3/4"
Allen Wrench M4
Screw M4 x 1-3/16"
#A 16pcs #B 6pcs #C 6pcs #D 6pcs
#E 30pcs #F 4pcs #G 1pc #H 16pcs
Screws _noom
Metal Dowel
Ø9x90mm
BOLT Ø1/4" x3-9/16"
BOLT Ø1/4X1-9/16"
Exploded View
#2
#4
#3 #9 #7
#8
#5 #9
#6
#1
#5
#3
#11
#12
#10
#4 #8
6 / 13

Hardware
Part
DisignationCarton
#1
#2
#4
#8
#9
#10
Ladder (Right)
Guardaril
Reinforce Bars
Back Guardaril Bars
Slats
#3
#5
#6
Ladder (Left)
Ladder Steps
#11
#12
#7
Font Guardaril Bars
CM-BK606-1
#F x 4pcs
#G x 1pcs
#A x 16pcs
#B x 6pcs
#Ex 30pcs
#D x 6pcs
#H x 16pcs
Top Side Panel (R)
Top Side Panel (L)
Bottom Side Panel
Front
Side Rails
Back
Side Panel
CM-BK606-2
#C x 6pcs
CM-BK606 is packed in 2 cases
7 / 13

1
#3 x2pcs
Part #4 x1pcPart #5 x1pc
Part #A x8pcs
Hardware
#H x8pcsHardware
2
#F x4pcs
Hardware
#G
#A
#H
#3
#5
#4
#3
#F
8 / 13
Align bottom side panels (#3) to the side rails (#4,5),
then secure by using bolts (#A) onto moons (#H).
Insert dowels (#F) to the top of the
bunk bed as shown in the diagram.

3
#1 x1pcPart #2 x1pcPart #4 x1pcPart
#A x8pcsHardware
#H x8pcs
Hardware
4
#10 x1pc
Part
#11 x1pcPart
#C x6pcs
Hardware
#5 x1pc
Part #6 x2pcs
Part
#D x4pcsHardware
#G #4
#5
#6
#D
#G
#H
#A
#2
#1
#10 #C
#G
#11
#12
#12 x3pcsPart
9 / 13
Align guardrails (#6) to the top side panels (#1,2),
then secure by using screws (#D).
Align side rails (#4,5) to the top side
panels (#1,2), then secure by using bolts
(#A) onto moons (#H).
Align ladder steps (#12) to the
ladder rails (#10,11), then secure
by using screws (#C).

#B
5
6
#B x4pcs
Hardware
#G
10 / 13
Align and place the top bunk onto
the bottom bunk.
Align ladder to the bunk bed, then secure by using
bolts (#B).

7
#7 x2pcs
Part #B x2pcsHardware
8
#8 x12pcsPart
Hardware #E x24pcs
#B
#G
#7
#D
#G
Hardware
#12
#E
#8
#8
x2pcs#D
11 / 13
Align guardrails (#7) to top bunk side
panel,then secure by using bolts (#D).
Secure ladder to guardrails (#7) by
using bolts (#B).
Align slats (#12) to the bunk bed, then
secure by using screws (#E).

Turn right (clockwise) to
tighten
9
10
Part #9 x2pcs
Hardware #E x6pcs
#9
#E
12 / 13
Align reinforce bars (#9) to the top
guardrails, then secure by using screws
(#E).

13/ 13