Furniture of America Gemma CM7303Q User manual

Remove HB legs (#2R/L) from the bottom
compartment of the headboard (#1).
Prepare 6 bolts assembly by inserting lock washer (#B), then flat washer (#C)
onto bolts (#A). Align HB legs (#2R/L) to the holes of the headboard (#1).
Secure by using bolts (#A).

Prepare 4 bolts assembly by inserting lock washer (#B), then
flat washer (#C) onto bolts (#A). Align legs (#4) to the holes of
the footboard (#3). Secure by using bolts (#A).
Prepare 8 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#D). Attach bolts
(#D) half way into the headboard (#1) and footboard (#3) holes. Rest the hooks of the side rails (#5) to bolts
(#D). Secure by tightening bolts (#D).

Attach support legs (#7) to the holes of the slat center support
(#6), then adjust the floor leveler of the support legs according
to ground level.
Align the bed slats (#8) to the side rails (#5) and center support (#6).
Secure by using screws (#E).