Furniture of America CM-BK618 User manual

1) Insert dowels (#I) to the holes of front left leg (#1) and
left rear leg (#2), then align and attach footboard frames
(#5,6) to the dowels (#I) of the legs (#1,2).
2) Secure footboard frames (#5,6) to
legs (#1,2) with bolts (#C).
1) Insert dowels (#I) to the holes of front right leg (#3) and right
rear leg (#4), then align and attach footboard frames (#5,6) to the
dowels (#I) of the legs (#3,4).
2) Secure footboard frames (#5,6) to legs (#3,4)
with bolts (#C).

1) Insert 2 dowels (#I) to each side of the back and front
guardrails (#11,12). Insert 2 barrel nuts (#B) to each side of the
lower side rails (#7,8) and upper side rails (#9,10). Align back
and front guardrails (#11,12) to the upper holes of the headboard/
footboard posts. Secure with screws (#F).
2) Align guardrails (#7,8,9,10) to
the holes of the headboard/
footboard posts. Secure by
tightening bolts (#A) to the barrel
nuts (#B).
1) Align guardrail attachment (#14)
to the dowels of the front guardrails
(#12) and holes of the upper front
side rail (#9). Secure with screws
(#G).
Secure with bolts (#D).

Align the guardrail supports (#13) to the upper guardrails,
then secure with screws (#H).
Align the ladder rung (#17) to the
ladder rails (#15,16). Secure with
screws (#G).

Align the ladder to the holes of the
guardrails. Secure with bolts (#E).
Align slat kits (#18) to the upper and bottom
side rails. Secure with screws (#H).