Furniture of America YNJ-1877C25 User manual

E-commerce-Enitial Lab
ASSEMBLY RATING
The Assembly Rating is a 5-point
system that shows the degree of effort
needed in assembling a specific
product (with 1 being easy and 5 being
difficult). For most products, two
persons are recommended.
EASY DIFFICULT
Page 1
ASSEMBLY INSTRUCTIONS
18.06.27
YNJ-1877C25
Tools Required for Assembly
2 PERSON RECOMMENDED
Phillips Screwdriver
(Not Included)
Allen Wrench
(Included)

Thank you for your purchase!
We hope you will enjoy your new product for many years to come. Our commitment
to providing quality products does not simply end when a purchase is made. We
stand behind our products and will provide any support needed in order for you to
fully enjoy your purchase. Your satisfaction is the greatest recognition we could
have.
Because we value your trust in our company, we will do our best to meet your
service expectations. Should you have any assembly related questions, parts
replacement requests, comments or suggestions, please feel free to contact us any
time. To help expedite the service, please have the assembly instructions available,
along with your order receipt.
[email protected]
www.foagroup.com
Toll-Free 1-888-980-5122 or 1-626-363-9311
1-626-270-4451
Monday to Friday 8:30 a.m. to 5:30 p.m. (PST)
https://twitter.com/foagroup
http://www.pinterest.com/foagroup/
http://instagram.com/foagroup#
https://www.youtube.com/user/FurnitureOfAmerica
Page 2

Page 3

Unless you are particularly adept at assembling flat-pack/knock-down
furniture, we understand building ready-to-assemble furniture can be a
frustrating experience for some. To help avoid confusion and to make
the assembly process quicker and smoother, we have provided some
helpful tips. Before you begin the assembly, please read the following:
1. Due to the size and/or weight on most of the ready-to-assemble furniture, it is
highly recommended that the assembly should be done near the area of its
intended location. Make sure you have enough space to move around during
the assembly. ALWAYS have at least two people to help with transporting and
assembling of the product to avoid any potential injury and/or damage.
2. To protect from damage, assemble the item on a clean, protective surface,
such as on a carpet or cardboard.
3. Make sure you have taken all the parts and hardware out of their packaging.
Do not throw away packaging material until assembly is completed.
4. Make sure all parts and hardware are accounted for by comparing the actual
parts and hardware to the list provided in the assembly instructions. Also
check for any irregularity such as crack, flaw or improperly drilled hole. If there
is any problem or missing piece, please contact the manufacturer or the
supplier. Please have the model number, part number and a brief description
of the problem ready will help expedite the replacement process.
5. Read the entire instruction manual and view the diagrams first before
assembling. Arrange your parts in order of use and group the identical
hardware together to make it easier to grab each piece as you begin to
assemble.
6. During the assembly process, make sure all parts are properly aligned before
tightening with the tool provided or required for the assembly. Do not use
power tools and do not over tighten.
7. When applying glue to the wood dowels to bond the parts together, please be
ABSOLUTELY certain that the parts are correct and lined up with each other
(refer to diagrams and take notice of the various pre-drilled hole locations).
When in doubt, assemble the parts together first and if the parts fit right, then
apply glue to the wood dowels.
PRE-ASSEMBLY INTRODUCTION
Page 4

CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS
ly
Page 5

HARDWARE LIST
Please keep for future reference
MODEL # YNJ-1877C25
PARTS LIST
14PCS
WINE CABINET
ASSEMBLY INSTRUCTIONS
8PCS
2
17.97" (W) X11.81" (D) X18.93" (H)
DIMENSIONS
Before you begin, please
read "Assembly and
Care Advice","Pre-
Assembly Introduction"
and "Cam Lock Fastener
Assembly Instructions"
Page 6
412PCS 61PC
4PCS
8
16PCS
5
4PCS
3
D1PC
1PC
B
E1PC
1PC
G
18.93"
F1PC
I1PC
J1PC
K4PCS
L1PC
94PCS
1.25"
A1PC
C1PC
H1PC
17.97"
11.81"
4PCS
7
0.59" 0.75"
A
E
K
H
C

Page 7
WINE CABINET
MODEL #YNJ-1877C25
Get Ready.
Please group boards as below.
Body
Shelf
A1PC 1PC BI1PC J1PC
C1PC D1PC
E1PC F1PC
1PC
GH1PC
L1PC
K4PCS

ASSEMBLY INSTRUCTIONS
Page 8
STEP1
Hardware #1=4pcs
Hardware #3=4pcs
Hardware #6=1pc
Hardware #7=4pcs
STEP2
Hardware #2=4pcs
1
1
3
3
B
1
3
3
1
A
7
6
7
7
7
D
1
2
Please refer to page 5
on how to fasten cam
locks(#2) to cam bolts
(#1,3).
2
B
I
J
2
AB
I
J
2
2
Make sure bending cam
bolts (#3) are attached
to panels (#A,B) with
the orientation of the
arrows above.
Bend the bending cam bolts (#3)
in the orientation as the arrows.

ASSEMBLY INSTRUCTIONS
STEP3
Hardware #2=4pcs
Hardware #4=4pcs
Page 9
E
F
L
A
B
E
F
2
2
2
2
G
H
D4
4
4
4
long
top
3
2
Make sure the bending cam
boles (#3) on panels (#A,B) are
bent to align to panels (#E,F).
Slide back panel (#L) through
the grooves of the unit.
The distance between the hole
to the end should be longer
here for panels (#G,H).
Finished side is facing up for
panels (#G,H,D).

ASSEMBLY INSTRUCTIONS
Page 10
STEP4
Hardware #4=8pcs
Hardware #5=16pcs
K
K
K
K
5
X16
Finished side of unit should all
be facing up.
Insertshelf pins (#5) to the
unit, the place shelves (#K)
onto shelf pins (#5).
G
H
C
4
4
4
4
E
F
4
4
4
4
C
G
H

ASSEMBLY INSTRUCTIONS
Page 11
STEP5
L
ASSEMBLY IS COMPLETED
Make sure the product is rested on a flat surface and does not feel loose or wobbly. If it does, double
check that the bolts/screws are secured and properly tightened.
Hardware #8=4pcs
Hardware #9=4pcs
X4
8
9
Insertfixativeplates (#8)
through the thin lined gaps
of the back panels (#L),
then secure by using
screws (#9).