Furniture of America CM7670Q User manual

For more information contact our team: [email protected]

/ Left

Attach footboard legs (#8) to the
headboard legs (#2).
1) Prepare 12 bolt assemblies. Insert lock washer (#B) then
flat washer (#C) to bolts (#A). Secure top flower (#9) to
headboard (#1) with bolts (#A) by using an Allen wrench
(#D).
2) Secure headboard legs (#2) to
headboard panel (#1) with bolts (#A).

Attach footboard legs (#8) to the
bottom of the footboard (#3).
1) Align the side rails (#4) to the holes of
the headboard (#1) and footboard (#3).
2) Insert nylon washer (#G) into
rails, then use threaded studs (#F)
to secure by using hex nut (#H)
on the stud (#F).

Attach support leg (#7) to the bed
slats (#6). Adjust leg according to
ground level.
Align bed slats (#6) to the holes of the side rails (#4), then
secure with screws (#E) by using a screwdriver.

For more information contact our team:
[email protected]

/ Left

Attach footboard legs (#8) to the
headboard legs (#2).
1) Prepare 12 bolt assemblies. Insert lock washer (#B) then
flat washer (#C) to bolts (#A). Secure top flower (#9) to
headboard (#1) with bolts (#A) by using an Allen wrench
(#D).
2) Secure headboard legs (#2) to
headboard panel (#1) with bolts (#A).