Furniture of America CM-DK6252CD-1 User manual

Bolt 1/4"x1-5/8''

I. Align the pre-drilled holes on the back panel (#4) with the pre-drilled holes on the left pedestal (#2)
and the right pedestal (#3).
II. Prepare 6 bolt assemblies by FIRST inserting the lock washer (#C) onto the bolt (#B) then the
flat washer (#D) onto that SAME bolt (#B), in that order. Secure using the Allen wrench (#A).
Note: Right and left are determined by facing
the FRONT of the furniture in its upright position.
Remove the top drawer on the left pedestal (#2) by pressing on the brackets on either side of the drawer.

I. Insert 4 plugs (#E) on top of the left pedestal (#2) and right pedestal (#3).
II. Carefully place the top panel (#1) on top and align the pre-drilled holes of the top panel (#1) with
the pre-drilled holes on the left pedestal (#2) and right pedestal (#3).
III. Prepare 12 bolt assemblies by FIRST inserting the lock washer (#C) onto the bolt (#B) then the
flat washer (#D) onto that SAME bolt (#B), in that order. Secure using the Allen wrench (#A).
Re-insert the top drawer
ASSEMBLY IS COMPLETED