Furniture of America CM-BK458Q User manual

ASSEMB INSTRUCTIONS
1 / 14
TOOLS REQUIRED
Allen Wrench
(Included)
Phillips
Screwdriver
(Not Included)
2 - People
Recommended
ASSEMB RING
 





Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you
purchase our product. We fully stand behind our products from start to finish.
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
CHECK
BEFORE STARTING
2 / XXXXXXX14

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / XXXXXXX14

4 / XXXXXXX14

BUNK BED

packed in 2 cases

 #1
 #2
 #3
 #4
 #13
 #14
 #5
 #6
 #7
 #8
 #9
 #10
 #11
 #12 



 





© 

r 
0 ► 
 

 
, "  
a � 
 

Align side rails (#5) to lower end
guardrails (#1,2), then secure by using
bolts (#A) onto barrel nuts (#B).
Insert dowels (#G) to guardrails (#6), then
secure guardrails (#6) to upper end
guardrails (#3,4) by using screws (#D).
Align side rails (#5) to upper end guardrails
(#3,4), then secure by using bolts (#A) onto
barrel nuts (#B).

Align guardrail supports (#7) to the
guardrails of the top bunk, then
secure by using screws (#H).
Insert dowels (#F) to the bottom
bunk, then align the top bunk to the
bottom bunk.