Furniture of America CM-DK6707 User manual

1) Align the stool stretchers (#1) to the holes of the stool side panels (#2). Make sure the stool
stretchers (#1) with the holes are faced and placed upwards. Secure with bolts (#A).
2) Align bottom stretcher (#11) to the holes of the side panels (#2), then secure with bolts (#A).
3) Align cushion (#3) to the holes of the stool stretchers (#1). Secure with bolts (#G).
3) Fully tighten the bolts (#A,G), then attach bolt caps (#C) to each bolt holes. Attach foot caps
(#B) to the bottom of the stool side panels (#2).
DO NOT FULLY TIGHTEN
BOLTS UNTIL THE SEAT
IS PUT TOGETHER.
DO NOT FULLY TIGHTEN BOLTS UNTIL THIS STEP IS PUT TOGETHER.
1) Align front frame (#5) to the front holes of the side panels (#4), then secure with bolts (#A).
2) Align back frame (#6) to the back top holes of the side panels (#4), then secure with bolts (#A).
3) Align bottom stretcher (#10) to the bottom back holes of the side panels (#4), then secure with bolts (#A).
4) Fully tighten bolts (#A), then attach bolt caps (#C) to each bolt holes.

DO NOT FULLY TIGHTEN UNTIL STEP IS DONE.
1) Align mirror stretchers (#7) to the holes of the mirror
(#8). Make sure to place the nuts (#F) in-between the
holes of the mirror (#8) and mirror stretchers (#7), then
secure with bolts (#E).
2) Align mirror stretchers (#7) to the holes of the back
frame (#6), then secure with bolts (#A).
3) Fully tighten all the bolts (#A,E), then attach the foot
caps (#B) to the bottom of the side panels (#4).
Attach the glass pads (#D) to the desk top and then carefully place the glass (#9) to the desk.