Furniture of America CM3970GL-AC-2PK User manual

EASY
The Assembly Rating is a 5-point system that
shows the degree of effort needed in
assembling a specific product (with 1 being
easy and 5 being difficult). For some
products, two persons are recommended.
Allen Wrench (Included)
Assembly Instructions
Tools Required for Assembly:
Rev.14-07-18
Page 1 of 6
DIFFICULT
ASSEMBLY RATING
Phillips Screwdriver (Not Included)
CM3970AC-2PK CM3970GL-AC-2PK

Thank you for your purchase!
We hope you will enjoy your new product for many years to come. Our commitment
to providing quality products does not simply end when a purchase is made. We
stand behind our products and will provide any support needed in order for you to
fully enjoy your purchase. Your satisfaction is the greatest recognition we could
have.
Because we value your trust in our company, we will do our best to meet your
service expectations. Should you have any assembly related questions, parts
replacement requests, comments or suggestions, please feel free to contact us any
time. To help expedite the service, please have the assembly instructions available,
along with your order receipt.
[email protected]
www.foagroup.com
1-626-363-9311
1-626-270-4451
Monday to Friday 8:30 a.m. to 5:30 p.m. (PST)
https://twitter.com/foagroup
http://www.pinterest.com/foagroup/
http://instagram.com/foagroup#
https://www.youtube.com/user/FurnitureOfAmerica
Page 2 of 6

Page 3 of 6

Parts List Hardware List
#1 x 1 pc x 2
Backrest w/Legs
#2 x 1 pc x 2
Seat
#3 x 2 pcs x 2
Front Leg
#A x 4 pcs x 2
Bolt 1/4”x3”
#B x 4 pcs x 2
Bolt 1/4”x2”
Before you begin, please read Page 3
of “Assembly and Care Advice”.
And remember, do not tighten until
each step is completed or instructed.
#C x 6 pcs x 2
Bolt 1/4”x1-1/2”
MD
#D x 14 pcs x 2
Lock Washer
#4 x 1 pc x 2
Left Armrest
Page 4 of 6
Note: The above parts and hardware are shown for a complete
assembly of ONE chair. However, the actual parts and hardware
(with an exception of the Allen wrench) in the box will be twice the
quantities listed to include the assembly of the second chair.
#E x 14 pcs x 2
Flat Washer
#F x 1 pc
Allen Wrench
#5 x 1 pc x 2
Right Armrest
#G x 2 pcs x 2
Wood Screw
X 2

I. Place the backrest with legs
(#1) on a protected surface.
Align the seat (#2) with the
pre-drilled holes of the
backrest with legs (#1).
II. Prepare two bolt assemblies
by inserting FIRST the lock
washer (#D) onto the bolt
(#C) and then the flat
washer (#E) onto the SAME
bolt (#C), in that order.
III. Insert the bolt assemblies
through pre-drilled holes of
the seat (#2) and secure
those bolts using the Allen
wrench (#F) to lock them
with the backrest with legs
(#1).
Turn right (clockwise) to tighten
Page 5 of 6
I. Prepare 4 bolt assemblies by
inserting FIRST the lock washer
(#D) onto the bolt (#A) and then
the flat washer (#E) onto the
SAME bolt (#A), in that order.
II. Insert the bolt assemblies
through the pre-drilled holes in
the corners of the seat (#2) and
secure those bolts using the
Allen wrench (#F) to lock them
with the backrest with legs (#1).
#A x 4 pcs
#D x 4 pcs
#E x 4 pcs
Turn right (clockwise) to tighten
#C x 2 pcs
#D x 2 pcs
#E x 2 pcs

I. Align the two front legs (#3)
with the pre-drilled holes on
the corners of the seat (#2).
II. Prepare 4 bolt assemblies by
inserting FIRST the lock
washer (#D) onto the bolt (#B)
and then the flat washer (#E)
onto the SAME bolt (#B), in
that order.
III. Insert the bolt assemblies
through the pre-drilled holes
on the corners of the seat (#2)
and secure those bolts using
the Allen wrench (#F) to lock
them with the front legs (#3).
Page 6 of 6
Turn right (clockwise) to tighten
#B x 4 pcs
#D x 4 pcs
#E x 4 pcs
Turn right (clockwise) to tighten
Note: Right and
left are determined
by facing the front
of the chair in its
upright position.
I. Align the left armrest (#4) with the pre-
drilled holes of the backrest with legs
(#1) AND the seat (#2).
II. Prepare 2 bolt assemblies by inserting
FIRST the lock washer (#D) onto the
bolt (#C) and then the flat washer (#E)
onto the SAME bolt (#C), in that order.
III. Insert those bolt assemblies through
the seat (#2) and secure those bolts
using the Allen wrench (#F) to lock
them with the seat (#2).
IV. Secure the other end of the left armrest
(#4) with a wood screw (#G) through
the backrest with legs (#1) using a
Phillips screwdriver to lock it with the
left armrest (#4).
V. Repeat the process above to assemble
the right armrest (#5) onto the backrest
with legs (#1) AND the seat (#2).
VI. Make sure the chair is rested on a flat
surface and does not feel loose or
wobbly. If it does, double check that
the bolts are secured and properly
tightened.
#C x 4 pcs
#D x 4 pcs
#E x 4 pcs
#G x 2 pcs
ASSEMBLE EVERYTHING EXACTLY THE SAME FOR THE SECOND CHAIR.
#2