Furniture of America CM4131E User manual

EASY
The Assembly Rating is a 5-point system that
shows the degree of effort needed in
assembling a specific product (with 1 being
easy and 5 being difficult). For some
products, two persons are recommended.
Assembly Instructions
No Tools Required for Assembly
Rev.14-07-02
Page 1 of 5
DIFFICULT
ASSEMBLY RATING
CM4131E

Thank you for your purchase!
We hope you will enjoy your new product for many years to come. Our commitment
to providing quality products does not simply end when a purchase is made. We
stand behind our products and will provide any support needed in order for you to
fully enjoy your purchase. Your satisfaction is the greatest recognition we could
have.
Because we value your trust in our company, we will do our best to meet your
service expectations. Should you have any assembly related questions, parts
replacement requests, comments or suggestions, please feel free to contact us any
time. To help expedite the service, please have the assembly instructions available,
along with your order receipt.
[email protected]
www.foagroup.com
1-626-363-9311
1-626-270-4451
Monday to Friday 8:30 a.m. to 5:30 p.m. (PST)
https://twitter.com/foagroup
http://www.pinterest.com/foagroup/
http://instagram.com/foagroup#
https://www.youtube.com/user/FurnitureOfAmerica
Page 2 of 5

Page 3 of 5

Parts List
#1 x 1 pc
Table Top
#3 x 4 pcs
Foot
#5 x 1 pc
Glass Top
#2 x 4 pcs
Leg
#4 x 1 pc
Shelf
Before you begin, please read Page
3 of “Assembly and Care Advice”.
And remember, do not tighten until
each step is completed or instructed.
MD
Page 4 of 5
Carefully place the table top
(#1) facing down on a
protected surface. Align the
threaded end of the legs (#2)
with the pre-drilled holes on
the bottom of the table top
(#1) and tighten by hand until
secured.

Page 5 of 5
Align the shelf (#4) with the
pre-drilled holes on the legs
(#2). Then align the threaded
end of the feet (#3) with the
pre-drilled holes on the
bottom shelf (#4) and tighten
by hand until secured with the
shelf (#4) and the legs (#2).
ASSEMBLY IS COMPLETED
Carefully place the glass top (#5) onto
the table top (#1). Make sure the table
is rested on a flat surface and does not
feel loose or wobbly. If it does, double
check that the legs/feet are secured
and properly tightened.
#1