Furniture of America CM-AC814 User manual

1 / 8
VERSION # 21-07-06

2 / 8
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

3 / 8
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
scratches and damages.

4 / 8

Pillow
5 / 8

OPERATING YOUR UNIT
Converting to Chair
Lift up all four sides of the ottoman skirting. Standing at the side of the unit, lift the top seat
cushion completely upright, fix the two longest skirt covers to the magnet, then lift the support
leg of the headrest (second cushion) and flip it over. Next, carefully set down the top upright
seat cushion, fix the two short skirt covers to the base frame by magnet and then convert the
backrest as desired with the sound of each click. Finally place the pillow as desired.
Converting to Bed
Lift the backrest all the way upwards until the last click is heard (which unlocks the mechanism) and
carefully return to a flat position. Next, open the two shortest skirt covers and lift the chair cushion
upwards until it stops. Then lift the bottom cushion by the support leg to flip over the cushion and
rest the support leg on the floor. Fix the two short skirt covers the base frame by magnet. Finally,
place the pillow as desired.
6 / 8

Converting to Chaise
Standing at the side of the unit, lift the back-rest to the desired position and secure it in
place by releasing to the sound of a click. Place the pillow as desired.
Converting to Chaise Lounge position
Lift the leg rest cushion and push the support leg back to the bottom of the cushion,
then carefully place the cushion on the floor.
7 / 8

8 / 8