Furniture of America CM7272-VN User manual

MODEL #
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION # 20-10-13
3 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
1 / 9
CM7272T- VN

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX9

4 / XXXXXX9

BED
5 / 9
Footboard Side Rail
#1 1pc #2 1pc #3 2pcs
Headboard
#4 4pcs
Support Leg
30x30x270mm
#5 1set
Slat (13pcs)
#6 2pcs
Front Leg
#8 1pc
Centre Rail
#7 2pcs
Rear Leg
#A 8pcs
Bolt
Ø5/16" x 1-1/2"
#B 8pcs
Lock Washer
Ø5/16"
#C 8pcs
Flat Washer
Ø5/16"
#D 1pc
#E 34pcs
Screw #8 x 38mm
Allen Wrench 5mm
Ø5/16"
CM7272-T- VN

6 / 9
Headboard #A x 8pcs
#B x 8pcs
#C x 8pcs
Carton Disignation Part Hardware
#1
#4
#5
#6
#7
#3
#8
Support Leg
30x30x270mm
Slat (13pcs)
Front Leg
Rear Leg
Side Rail
Centre Rail
#D x 1pc
#E x 34pcs
#2Footboard
CM7272-T-VN is packed in 2 cases
CM7272-T
-HBFB-VN
CM7272-T-R-VN

Exploded View
#4
#1
#2
#7
#3
#8
#6
#5
7 / 9

Hardware #A x8pcs
Hardware #B x8pcs
Hardware #C x8pcs
Part #3 x2pcs
ASSEMBLY INSTRUCTIONS
Part #1 x1pc
Part #2 x1pc
Hardware #E x8pcs
Part #6 x2pcs
Part #7 x2pcs
#D
8 / 9
1
2
#1
#2
#6
#7
#E
#A
#B
#C
#1
#2
#3
#3
Attach HB legs (#6) to
the headboard (#1).
Align FB legs (#7) to the
footboard (#2), then secure
by using screws (#E).
Secure bolts (#A) with washers (#B,C) 75% into headboard (#1)
and footboard (#2). Hook side rails to the bolts (#A) of headboard
(#1) and footboard (#2), then fully tighten bolts (#A).

ASSEMBLY INSTRUCTIONS
Part #4 x4pcs
Part #5 x1set
Part #8 x1pc
Hardware #E x26pcs
#4
#8
#5
#E
9 / 9
3
4
Align center rail (#8) to the slats (#5), then secure by attaching support legs
(#4) to the center rail (#8) and slats (#5). Adjust the leveler on the support
legs (#4) according to ground level.
Align slats (#5) to the side rails (#3), then secure
by using screws (#E).