Furniture of America CM-AC6401 User manual

For more information contact our team: [email protected]

Align front rail (#4) to the left arm (#2), then
secure by using bolts (#A) with washers (#F).
Align right arm (#3) to the front rail (#4), then
secure by using bolts (#A) with washers (#F).
#4
#4

Align chair back (#1) to the arms (#2,3). Secure the upper 2
upper holes by using bolts (#A) with washers (#F,E). Secure the
lower 4 bolts by using bolts (#A) with washers (#F).
Align rocker runners (#5) to the holes of the arms (#2,3),
then secure by using bolts (#B) with washers (#C,D).

Place seat cushion (#6) onto rocking chair, then secure by using screws (#J). There are no pre-
drilled holes on seat cushion (#6). Screw (#J) directly into wooden frame of seat cushion (#6).
Place back cushion (#7) to rocking chair.
ASSEMBLY COMPLETED