Furniture of America CM7386EK User manual

MODEL #
CM7386EK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
3 - People
(Included)
Allen Wrench
Recommended
Phillips
Screwdriver
(Not Included)
1 / 9
VERSION # 20-04-29

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX9

4 / XXXXXXX9

#1 1pc #2 2pcs
Headboard Leg (L&R)
#3 1pc
Headboard Rail
#4 2pcs
#5 1 Set #6 1 pc
Slat support leg
(310x30x30mm)
Slat (13pcs)
#A 6pcs #B 6pcs #C 6pcs
Flat washer
Ø1/4"x19mm
Bolt Ø1/4" x 1-3/8"
Footboard
Lock washer Ø1/4"
(Ø5/16")
#7 4pcs
Center Rail
#D 1pc #E 12pcs
5 / 9
Allen wrench 4mm Screw #4 x 30mm
CM7386EK
E.KING BED

Exploded View
#1
#3
#4
#4
#6
#7
#5
#2L
#2R
6 / 9

Carton Disignation Part Hardware
#A x 6pcs
#B x 6pcs
#C x 6pcs
#D x 1pc
#1
Headboard
Headboard Leg
(L&R)
Footboard
Rail
Slat (13pcs)
Center Rail
Slat support leg
(310x30x30mm)
#E x 12pcs
#2
#3
#4
#5
#6
#7
7 / 9
CM7386EK is packed in 3 cases
-HB
-FB
-R
CM7386EK
CM7386EK
CM7386EK

ASSEMBLY INSTRUCTIONS
1
8 / 9
2
Part #3 x1pc
Part #4 x2pcs
Part #1 x1pc
Part #2 x2pcs
Hardware #A x6pcs
Hardware #B x6pcs
Hardware #C x6pcs
#1
#4 #3
#4
#D
#A
#B
#C
#1
#2R
#2L
1. Prepare 6 bolt assemblies by first
inserting a lock washer (#B) onto
the bolt (#A) then a flat washer
(#C) onto that same bolt (#A).
2. Align the legs (#2) to the
holes along the side of
the headboard (#1), then
insert the bolts and secure.
Hook each end of the side rails
(#4) onto the slots along the head-
board (#1) and foot board (#3).

ASSEMBLY INSTRUCTIONS
9 / 9
3
Part #6 x1pc
Part #7 x4pcs
4
#6
#7
Part #5 x1set
Hardware #E x12pcs
#5
#E
#4
#5
Insert the threaded ends of the support
legs (#7) into the holes along the center
rail (#6), turn right to tighten.
Adjust according
to the ground level.
Place the bed slats (#5)
onto the rails, then
insert a screw (#E) into
each hole. Secure
using a screwdriver