Furniture of America Diana CM7939Q User manual

Rev: 16-04-14

1. Prepare 6 bolt assemblies
by inserting a flat washer
(#D) onto the bolts (#A).
2. Insert the side rails
(#3) into the side rails
(#4), then insert a bolt
assembly into each rail
and secure using the
Allen wrench (#E).
1. Prepare 6 bolt assemblies
by inserting a flat washer
(#D) onto the bolts (#C).
2. Align the support legs (#7) to the holes
along the slats (#5,6), then insert the
bolt assemblies from above. Secure
using the Allen wrench (#E).

1. Prepare 8 bolt assemblies
by inserting a flat washer
(#D) onto the bolts (#B).
1. Prepare 8 bolt assemblies
by inserting a flat washer
(#D) onto the bolts (#A).
2. Place the slats (#5,6)
onto the slots indicated
in the image, then insert
a bolt assembly into
each hole and secure
using the Allen wrench.
2. Align one end of the
side rails to the holes
along the headboard (#1).
Align the other ends to
the footboard (#2). Insert
the bolt assemblies into
each hole and secure.

1. Prepare 6 bolt assemblies
by inserting a flat washer
(#D) onto the bolts (#A).
2. Insert the side rails
(#3) into the side rails
(#4), then insert a bolt
assembly into each rail
and secure using the
Allen wrench (#F).
1. Prepare 6 bolt assemblies
by inserting a flat washer
(#D) onto the bolts (#C).
2. Align the support legs (#7) to the holes
along the slats (#5,6), then insert the
bolt assemblies from above. Secure
using the Allen wrench (#F).

1. Prepare 8 bolt assemblies
by inserting a flat washer
(#D) onto the bolts (#B).
2. Align the connecting
plates (#E) to the holes
along the headboard
(#1) then align the rails
as shown to those
plates. Align the other
ends to the footboard
(#2). Insert the bolt
assemblies into each
hole and secure.
1. Prepare 8 bolt assemblies
by inserting a flat washer
(#D) onto the bolts (#A).
2. Place the slats (#5,6)
onto the slots indicated
in the image, then insert
a bolt assembly into
each hole and secure
using the Allen wrench.

1. Prepare 6 bolt assemblies
by inserting a flat washer
(#D) onto the bolts (#A).
2. Insert the side rails
(#3) into the side rails
(#4), then insert a bolt
assembly into each rail
and secure using the
Allen wrench (#F).
1. Prepare 6 bolt assemblies
by inserting a flat washer
(#D) onto the bolts (#C).
2. Align the support legs (#7) to the holes
along the slats (#5,6), then insert the
bolt assemblies from above. Secure
using the Allen wrench (#F).

1. Prepare 8 bolt assemblies
by inserting a flat washer
(#D) onto the bolts (#B).
2. Align the connecting
plates (#E) to the holes
along the headboard
(#1) then align the rails
as shown to those
plates. Align the other
ends to the footboard
(#2). Insert the bolt
assemblies into each
hole and secure.
1. Prepare 8 bolt assemblies
by inserting a flat washer
(#D) onto the bolts (#A).
2. Place the slats (#5,6)
onto the slots indicated
in the image, then insert
a bolt assembly into
each hole and secure
using the Allen wrench.

Rev: 16-04-14