Furniture of America Avantgarde CM7448Q User manual

For more information contact our team: [email protected]

Prepare 8 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A).
Align headboard legs (#4R/L) to the holes of the headboard (#1). Secure with bolts (#A).
Hook the side rails (#3) to the latch located at the bottom of the headboard (#1)
and footboard (#2). Make sure the side rails are firmly attached.

Attach support leg (#6) to each slats (#5). Adjust the
floor protector according to ground level.
Align slats (#5) to the side rails (#3). Secure with screws (#E).

For more information contact our team: [email protected]

Prepare 8 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A).
Align headboard legs (#4R/L) to the holes of the headboard (#1). Secure with bolts (#A).
Hook the side rails (#3) to the latch located at the bottom of the headboard (#1) and
footboard (#2). Make sure the side rails are firmly attached.

Attach 2 support legs (#6) to each slats (#5). Adjust the
floor protector according to ground level.
Align slats (#5) to the side rials (#3). Secure with screws (#E).

For more information contact our team: [email protected]

Prepare 8 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A).
Align headboard legs (#4R/L) to the holes of the headboard (#1). Secure with bolts (#A).
Hook the side rails (#3) to the latch located at the bottom of the headboard
(#1) and footboard (#2). Make sure the side rails are firmly attached.

Attach 2 support legs (#6) to each slats (#5). Adjust the floor
protector according to ground level.
Align slats (#5) to the side rials (#3). Secure with screws (#E).