Furniture of America CM-BK919 User manual

Assembly Instructions
ASSEMBLY RA TING Tools Required For Assembly:



 

O
O O

Allen Wrench 1 (Included) �

2 PERSONS RECOMMENDED
Page 1 of 11

1,2) Align upper panel (#12) to the holes of the posts (#1,2).
Secure by using bolts (#A).
3) Align bottom frame
(#14) to the holes of the
posts (#1,2). Secure by
using bolts (#G).
4) Align long ladder (#19) to the
holes of the upper panel (#12) and
bottom frame (#14). Secure by
using bolts (#C).
5) Align long ladder (#19) to
the holes of the post (#1), then
secure by using bolts (#B).

1) Align head panel (#13) to the holes of the posts (#3,4),
then secure by using bolts (#A).
2) Align bottom frame (#15) to the holes of the
posts (#3,4), then secure by using bolts (#G).
3) Align guardrail (#16) to the holes of the
headboards. Secure by using bolts (#A,H).
2) Align bottom tubes (#9) to the bottom holes of
the headboards, then secure by using bolts (#H).
1) Align guardrail (#7,8) to the holes of the
headboards, then secure by using bolts
(#G,H).

1,2) Align rear vertical tube (#21) to the holes of the
guardrails. Secure by using bolts (#A,F).
Align headboard panel (#13) to the holes of the posts (#5,6). Secure by using bolts (#A).

1,2) Align ladder (#20) to the holes of the middle
bunk. Secure by using bolts (#F,B).
1) Align guardrails (#10,11) to the holes of the headboards.
Secure by using bolts (#G,H).
2) Secure by using
bolts (#C,D).
3) Secure by using bolts (#C,E).
4) Secure by using
bolts (#A).

ASSEMBLY COMPLETED
Place slats (#17,18) to all bunks, then secure by using bolts (#B).