Furniture of America Kristen CM3060SC User manual

For more information contact our team: [email protected]

DO NOT FULLY TIGHTEN ALL BOLTS UNTIL FULL
ASSEMBLY OF PRODUCT IS COMPLETED.
1) Align box seat (#7) to the chair back
(#1). Secure middle hole of seat (#7)
to chair back (#1) by using bolts (#C)
with washers (#F,G).
2) Secure corner holes of the seat
(#7) to chair back (#1) by using bolts
(#E) with washers (#F,G).
PLACE CHAIR ONTO A TABLE UPSIDE DOWN
2) Align right side stretcher (#4) to the
gaps of the chair legs, then secure by
using screws (#A).
1) Align right front leg (#2) to the
seat, then loosely secure by using
bolts (#D) with washers (#F,G).
3) Align middle stretcher (#6) to the right side
stretcher (#4), then secure by using screw (#A).

1) Align front leg (#3) to the seat
(#7), then loosely secure by using
bolts (#D) with washers (#F,G).
2) Align left stretcher (#5)
to the gaps of the legs and
middle stretcher (#6).
3) Secure middle stretcher (#6)
by using screws (#A).
4) Secure left stretcher (#5) to
legs by using screws (#A).
#5
#5
Align wooden seat (#8) to the chair frame,
then secure by using screws (#B).