Furniture of America CM7859EK User manual

1 / 9
MODEL #
CM7859EK/CK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
(Included)
Wrench

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX9

4/ XXXXXXX9

HeadboardPanel HB Leg (L&R) Footboard Side Rail
Bed Slat
Headboard Support Support Leg 30x30x255mm
Screw #4 x 30mm Threaded Pins
Ø5/16" x 3-1/2" Hex Nut Ø5/16" Wrench 14mm
Ø5/16
Nylon Washer
Ø5/16"
Bolt Ø5/16" x 1-3/4" Lock Washer Ø5/16" Flat Washer
Ø5/16" Allen Key 4mm
#E 8 pcs
1 / 9
MODEL #
CM7859EK/CK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 20-06-13
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
BED
CM7859EK/CK
#1 1pc #2 2pcs #3 1pc
#A 12pcs #B 12pcs #C 12pcs
5 / 9
#4 2pcs
#D 1pc
#5 1pc #6 4pcs #7 8pcs
#F 8pcs #G 8pcs #H 8pcs #I 1pc
(Included)
Wrench

HeadboardPanel HB Leg (L&R) Footboard Side Rail
Bed Slat
Headboard Support Support Leg 30x30x255mm
Screw #4 x 30mm Threaded Pins
Ø5/16" x 3-1/2" Hex Nut Ø5/16" Wrench 14mm
Ø5/16
Nylon Washer
Ø5/16"
Bolt Ø5/16" x 1-3/4" Lock Washer Ø5/16" Flat Washer
Ø5/16" Allen Key 4mm
#E 8 pcs
1 / 9
MODEL #
CM7859EK/CK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 20-06-13
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
BED
CM7859EK/CK
#1 1pc #2 2pcs #3 1pc
#A 12pcs #B 12pcs #C 12pcs
5 / 9
6 / 9
CM7859EK/CK is packed in 3 cases
Carton Disignation Part Hardware
CM7859EK/CK-3
CM7859EK/CK-1
#1 #A x 12pcs
#B x 12pcs
#C x 12pcs
#D x 1pc
#4 2pcs
#D 1pc
#5 1pc #6 4pcs #7 8pcs
#F 8pcs #G 8pcs #H 8pcs #I 1pc
#5
#2
#3
#4
#6
#7
HeadboardPanel
Headboard Support
HB Leg (L&R)
Footboard
Side Rail
Bed Slat
Support Leg
CM7859EK/CK-2
#E x 8pcs
#F x 8pcs
#G x 8pcs
#H x 8pcs
#I x 1pc
(Included)
Wrench

HeadboardPanel HB Leg (L&R) Footboard Side Rail
Bed Slat
Headboard Support Support Leg 30x30x255mm
Screw #4 x 30mm Threaded Pins
Ø5/16" x 3-1/2" Hex Nut Ø5/16" Wrench 14mm
Ø5/16
Nylon Washer
Ø5/16"
#D
#A
#C
#B
#1
#2R
#2L
Bolt Ø5/16" x 1-3/4" Lock Washer Ø5/16" Flat Washer
Ø5/16" Allen Key 4mm
#E 8 pcs
1 / 9
MODEL #
CM7859EK/CK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 20-06-13
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
Part#1 x1pc
Part#2 x2pcs
Hardware
#A x8pcs
Hardware
#B x8pcs
Hardware
#C x8pcs
BED
CM7859EK/CK
#1 1pc #2 2pcs #3 1pc
#A 12pcs #B 12pcs #C 12pcs
5 / 9 6 / 9
CM7859EK/CK is packed in 3 cases
Carton Disignation Part Hardware
CM7859EK/CK-3
CM7859EK/CK-1
#1 #A x 12pcs
#B x 12pcs
#C x 12pcs
#D x 1pc
#4 2pcs
#D 1pc
#5 1pc #6 4pcs #7 8pcs
#F 8pcs #G 8pcs #H 8pcs #I 1pc
#5
#2
#3
#4
#6
#7
HeadboardPanel
Headboard Support
HB Leg (L&R)
Footboard
Side Rail
Bed Slat
Support Leg
CM7859EK/CK-2
#E x 8pcs
#F x 8pcs
#G x 8pcs
#H x 8pcs
#I x 1pc
1
2
7 / 9
ASSEMBLYINSTRUCTIONS
#1
#4 #3
#4
#6
#7
#5
#2
#2
(Included)
Wrench
Prepare 8 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A). Align
headboard legs (#2R/L) to the holes of the headboard (#1). Secure with bolts (#A).

HeadboardPanel HB Leg (L&R) Footboard Side Rail
Bed Slat
Headboard Support Support Leg 30x30x255mm
Screw #4 x 30mm Threaded Pins
Ø5/16" x 3-1/2" Hex Nut Ø5/16" Wrench 14mm
Ø5/16
Nylon Washer
Ø5/16"
#5
#A
#C#B
#D
#F
#H
#I #G
#D
#A
#C
#B
#1
#2R
#2L
#4
#4
#3
Bolt Ø5/16" x 1-3/4" Lock Washer Ø5/16" Flat Washer
Ø5/16" Allen Key 4mm
#E 8 pcs
1 / 9
MODEL #
CM7859EK/CK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 20-06-13
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
Part#1 x1pc
Part#2 x2pcs
Hardware
#A x8pcs
Hardware
#B x8pcs
Hardware
#C x8pcs
BED
CM7859EK/CK
#1 1pc #2 2pcs #3 1pc
#A 12pcs #B 12pcs #C 12pcs
5 / 9 6 / 9
CM7859EK/CK is packed in 3 cases
Carton Disignation Part Hardware
CM7859EK/CK-3
CM7859EK/CK-1
#1 #A x 12pcs
#B x 12pcs
#C x 12pcs
#D x 1pc
#4 2pcs
#D 1pc
#5 1pc #6 4pcs #7 8pcs
#F 8pcs #G 8pcs #H 8pcs #I 1pc
#5
#2
#3
#4
#6
#7
HeadboardPanel
Headboard Support
HB Leg (L&R)
Footboard
Side Rail
Bed Slat
Support Leg
CM7859EK/CK-2
#E x 8pcs
#F x 8pcs
#G x 8pcs
#H x 8pcs
#I x 1pc
Part#5 x1pc
Hardware
#A x4pcs
Hardware
#B x4pcs
Hardware
#C x4pcs
Part#3 x1pc
Part#4 x2pcs
Hardware
#F x8pcs
Hardware
#G x8pcs
Hardware
#H x8pcs
1
2
7 / 9
ASSEMBLYINSTRUCTIONS
#1
#4 #3
#4
#6
#7
#5
#2
#2
3
4
8 / 9
ASSEMBLYINSTRUCTIONS
(Included)
Wrench
Prepare 4 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A). Align
headboard support (#5) to the holes of the headboard (#1), then Secure with bolts (#A).
Attach threaded pins (#F) to the holes of the headboard (#1) and footboard (#3). Align the side rails (#4) to
the threaded pins (#F) that are attached to headboard (#1) and footboard (#3). Secure by using nylon
washer (#H), with hex nut (#G).

#6
X4
#7
#E
#6
#4
#4
HeadboardPanel HB Leg (L&R) Footboard Side Rail
Bed Slat
Headboard Support Support Leg 30x30x255mm
Screw #4 x 30mm Threaded Pins
Ø5/16" x 3-1/2" Hex Nut Ø5/16" Wrench 14mm
Ø5/16
Nylon Washer
Ø5/16"
#5
#A
#C#B
#D
#F
#H
#I #G
#D
#A
#C
#B
#1
#2R
#2L
#4
#4
#3
Bolt Ø5/16" x 1-3/4" Lock Washer Ø5/16" Flat Washer
Ø5/16" Allen Key 4mm
#E 8 pcs
1 / 9
MODEL #
CM7859EK/CK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 20-06-13
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
Part#1 x1pc
Part#2 x2pcs
Hardware
#A x8pcs
Hardware
#B x8pcs
Hardware
#C x8pcs
BED
CM7859EK/CK
#1 1pc #2 2pcs #3 1pc
#A 12pcs #B 12pcs #C 12pcs
5 / 9 6 / 9
CM7859EK/CK is packed in 3 cases
Carton Disignation Part Hardware
CM7859EK/CK-3
CM7859EK/CK-1
#1 #A x 12pcs
#B x 12pcs
#C x 12pcs
#D x 1pc
#4 2pcs
#D 1pc
#5 1pc #6 4pcs #7 8pcs
#F 8pcs #G 8pcs #H 8pcs #I 1pc
#5
#2
#3
#4
#6
#7
HeadboardPanel
Headboard Support
HB Leg (L&R)
Footboard
Side Rail
Bed Slat
Support Leg
CM7859EK/CK-2
#E x 8pcs
#F x 8pcs
#G x 8pcs
#H x 8pcs
#I x 1pc
Part#5 x1pc
Hardware
#A x4pcs
Hardware
#B x4pcs
Hardware
#C x4pcs
Part#3 x1pc
Part#4 x2pcs
Hardware
#F x8pcs
Hardware
#G x8pcs
Hardware
#H x8pcs
Part#6 x4pcs
Part#7 x8pcs
5
6
9 / 9
ASSEMBLYINSTRUCTIONS
Hardware
#E x8pcs
1
2
7 / 9
ASSEMBLYINSTRUCTIONS
#1
#4 #3
#4
#6
#7
#5
#2
#2
3
4
8 / 9
ASSEMBLYINSTRUCTIONS
(Included)
Wrench
Attach support legs (#7) to the slats (#6). Adjust adjustable foot
of the support leg (#7) according to ground level.
Align slats (#6) to the side rails (#4),
then secure with screws (#E).