Fusion DGI9046 User manual

m
Food Care
POPCORN MAKER
Model No. DGI9046
230V- 50Hz 1200W
(-*"u"nmC€@OE

KNOW THE POPCORN MAKER
MEASURlNG CUP
TOP COVER
CORN-IN-LET
PLASTIC BO DY
SW ITCH STAND BASE
IMPORTANT SAFEGUARDS
. when using electrical appliances, basic safety precautions should always be
followed, including the following:
o 1. Read all lnstructions.
. 2. Do not touch hot surfaces. Use handles or knobs.
. 3. To protect against electric shock do not immerse cord, plugs in water or others.
. 4. close supervision is necessary when any appliance is used by or near children.
. 5. Unplug frorn outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts, and before cleaning the appliance.
r 6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions. Return appliance to the nearest authorized service facility
for examination, repair or adjustment.
. 7. The use of accessory attachments not recommended by the appliance
manufacturer may cause injuries.
. 8. Do not use outdoors
. 9. Do not let cord hang over edge of table or counter, or touch hot surfaces.
. 10. Do not place on or near a hot gas or electric burner, or in a heated oven.
. 11. Extreme caution must be used when moving an appliance containing hot oil or
other hot liquids.
. 12. Always attach plug to appliance first, then plug cord in the wall ouflet. To
disconnect, turn any control to "off', then remove plug from wall ouflet.
. 13. Do not use appliance for other than intended use.
. 14. A popper that is plugged into an ouflet should not be left unattended.
. 15. Extreme caution must be used when unloading popcorn. Always turn the unit

over a counter-top so that residual hot oil or water running out will not cause burns.
. '16. This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit into a polarized ouilet
only one way. lf the plug does not fit fully into the outlet, reverse the plug. lf it still
does not fit, contact a qualified electrician. Do not attempt to modify the plug in
any way.
. 17. A short power-supply cord is to be provided to reduce the risk resulting from
becoming entangled in or trippin$ over a longer cord.
. 18. lf a long detachable power-supply cord or extension cord is used:
1) The marked electrical rating of the cord or extension cord should be at least as
great as the electrical rating of the appliance;
2) lf the appliance is of the grounded type, the extension cord should be a
grounding 3-wire cord.
. All requested breaks must be followed.
. Please refer to the rating label for the maximum continuous usage time (KB 5
min is the maximum usage time).
. The breaks should last at least 10 minutes.
. '1 9. This appliances are not intended to be operated by means of an external timer
or separate remote-control system.
. 20. For safety reasons a damaged or defecrive supply cord should only be
replaced by service centre.
. 21.This appliance is not intended for use by persons(including children)with
reduced physical,sensory or mental capabilies.or lack of experience and
knowledge,unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.Children should be
supervised to ensure that they do not play with the appliance.
SAVE THESE INSTRUCTION
USING THE POPCORN MAKER
o Place the Popcorn Maker on a level surface.
. Before first use, it is recommended to wipe the Popcorn Maker and accessories
with a damp cloth.
o Measure Popcorn using the Measuring cup provided. one full measure per
session is enough. More than one full measure could overfill the Popcorn Maker
and disturb the proper functioning of the Popcorn Maker.
. Pour the Popcorn into the Aluminum Heat chamber through the coRN-lN-LET.

a
a
Replace the Measuring Cup into position inside the Top Cover after every use.
Place a large bowl under the Spout so that the edge of the bowl is touching the
body of the Popcorn Maker. lt is important that the Popcorn ejects down the Spout
into the bowl and not re-directed, blocked or otherwise interfered with, since the
Popcorn is hot and premature contact may cause minor discomfort.
Switch On the Popcorn Maker. After a few moments the continuous popping action
will automatically feed Popcom from the Aluminium Heat Chamber out through the
Spout until all has popped. This process will last about 3 minutes.
Turn off the Popcorn Maker and remove the mains plug from the mains supply
when popping has stopped.
If more Popcorn is required, remove the Popcorn remaining in the Aluminium
Heat Chamber. Pay attention not to get burnt when handling the Top Cover as
this part as well as the Measuring Cup is very hot when the Popcorn Maker is
functioning.
NOTE : Wait for approx. l0 to 12 minutes before using the Popcorn Maker again.
WARNING:
Popcorn is usually very dry.
Place the Measuring Cup on top of the Top Cover, butter side up.
Never put the butter into the Aluminum Heat Chamber.
CLEANING AND MAINTENANCE
Before cleaning, remove the mains plug from the mains supply.
Make sure the Popcorn Maker has cooled down completely before cleaning.
Clean the plastic parts of the Popcorn maker with a damp cloth. Never use
abrasive products as they could damage the Popcorn maker.
The Top Cover and the Measuring Cup can be cleaned in warm soapy water.
STORAGE
When the Popcorn Maker is not in use, disconnect the Popcorn Maker and store in a safe,
dry place, out ofreach ofchildren.
SPECIFICATIONS :
MODEL NO DGt9046
RATED VOLTAGE 230 V
RATED FREQUENCY 5QHz
RATED POWER 1200w
a
a
a
a
a
a