futudent Novocam User manual

INSTRUCTIONS FOR USE - futudent
1
Thank you for purchasing the futudent product.
Novocam Medical Innovations Oy (Novocam) is selling futudent for dental
market.
These apparatuses are intended by the manufacturer to be used by qualified
healthcare professionals to capture videos and pictures during dental and
medical treatments for the purpose of documentation, providing additional
information for diagnosis, following and evaluating changes of medical
conditions and for educational purposes in dental and medical field.
Important Safety Information
Warnings
!The device must only be used for the intended purpose described above
only.
!The camera must not be connected to life-supporting computers or
devices.
!Disassembling the device is prohibited.
!Do not make any changes, modifications or alterations to the device.
!Do not change lenses in vicinity of patients. If lens needs to be changed or
focused make sure the camera is not above the patient due to the risk of
lens drop.
!Do not leave loose cables on the floor. Cables on the floor should be
protected by cable shields or otherwise sufficiently protected.
!Ensure all components or parts are attached before use:
Check that the camera lens is attached properly to the camera. Do
not turn lens too much because it might fall out. The camera will be
completely out of focus well before the lens detaches. If the lens is
detached, insert it carefully so that the threads are not damaged.
Remove lens cover before attaching the camera to the overhead
light or to the loupes.
Adjust the lens focus before the operation / treatment.
Make sure that the camera is attached firmly to the loupes,
headband or overhead light with no wiggling.
When having camera mounted to the loupe, attach the cable spiral
to the loupes before the operation.
Check that the device is clean. If not, clean the device carefully as
described below.
The computer used for shooting videos must be placed at least
2m/7ft. from the patient.
If the device or its components function abnormally, stop using the
device as soon as possible, and contact the seller or manufacturer.
Safety precautions
!Do not use the device outdoors.
!Protect the device from fluids.
!Do not use in direct sunlight, dust, salt, magnetic fields, chemicals, gases,
radiation, electrostatic discharge, acceleration, thermal ignition sources or
to adverse environmental conditions.
!Store the device in specified temperatures only.
!Keep cables away from fire or severe heat (over 70°C/158°F)
!Sometimes camera color settings are inaccurate, or monitors / screens
are not presenting colors correctly and you need to adjust color
settings.(see 7.5.)
!Camera’s image quality can look low due to insufficient lighting
conditions. Ensure sufficient amount of light. (see 7.6.)
!
If you notice that device gets hot, has an odor, or changes color or shape,
disconnect device immediately. DO NOT USE THE DEVICE!
Working condition precautions
!Do not use the device, when working temperature is above 30°C/86°F or
when humidity is over 85 %.
!Do not handle the device by the cable.
!The camera must not be exposed to pressure, shock, vibration, or other
mechanical stress.
!Do not use the camera with wet hands or wet gloves.
!Do not spray the device with water/detergent.
!Do not sink the device in any liquid.
!Do not use the device if the camera overheats (over 50°C/120°F),
disconnect it from the computer and allow it to cool for one hour. If the
device becomes hot again in a relatively short period (1-5min), do not use
it and contact the seller or manufacturer.
!Check the cable visually from time to time. If the surface of the cable is
damaged, contact the nearest local support or manufacturer.
!
Storage condition precautions
!Keep the device in the temperature between 5° to 50°C (41F to 122°F).
!Keep the room relative humidity between 10% - 85% (non-condensing).
If Futulight is purchased (optional accessory)
!Do not use Futulight when it is connected to a power supply.
!Charge Futulight before the operation.
NOTE: It is advised that Futulight is not the primary light to use during
the treatment / recording. An alternative light source is recommended in
case the Futulight battery is running out.
!Do not charge Futulight battery on flammable materials, such as a
bed, couch or on paper.
!Do not overcharge your device; unplug the device when fully
charged.
!Never keep li-ion batteries near heat sources or in high
temperatures, such as direct sunlight, radiators or laptops.
!Do not let battery get wet or to be exposed to liquids.
!Store the battery in a secure, dry, and cool place, and away from
flammable materials. Keep batteries separate from metal objects.
!If you notice signs that the battery has a problem, such as
overheating, odor, leaks, or change in color/shape, shut off the
device and move it away from things that can catch fire and contact
the seller or manufacturer..
Important
If the camera stops working for any reason during the treatment,
continue the treatment as you would do without the camera
The device is not compatible with other devices that are not
mentioned in this document. Connecting the device to any external
device, such as electricity, gas or hydraulic and pneumatic source, is
prohibited.
Equipment must not be brought into contact with the patient or
brought to the sterile area. Do not touch the lens during
treatments in order to keep sterile.
Do not touch the camera during the treatments
Liability notes
This instruction and the accompanying documents should be thoroughly
read before using the device. Novocam Medical Innovations Oy is not
responsible for any injury, damage or malfunction arising from the use or
inability to use any information, apparatus, method or process disclosed
in this document.
1. Know Your Device
1.1 Products Specification
proCam is the first miniature 4K (2160p) dental camera on the market
and its 13-megapixel sensor captures both 4K video and hi-res still photos
from either loupes or the overhead treatment light.
Technical specifications for proCam
Resolution: 13 MPix / 4K & 1080p (video)
Full aluminum body
Weight: 29 grams (1.02 ounces)
Dimensions: 32 x 23 x 29 mm (1.27 x 0.91 x 1.14 inches)
Digital zoom (up to 3x)
Optics changeable lenses with manual focus
Hands free operations with USB foot pedal
Mounting options:
•Loupe mount (universal/loupe specific attachments)
•Overhead light or Headband
•Gooseneck/flexible arm
USB 2 connection with detachable cable (USB micro connector)
Camera is fully powered through USB
Recording software: Win, Mac and Android
5 software licenses included/unit
Regulatory compliance:
oMDR 2017/745, classification I
eduCam - is a 1080p (fullHD) 30 FPS multi-mount camera designed for
healthcare professionals.
Technical specifications for eduCam
Resolution: 3.4MPix / Full HD (video)
Full aluminum body
Weight: 29 grams (1.02 ounces)
Dimensions: 32 x 23 x 29 mm (1.27 x 0.91 x 1.14 inches)
Digital zoom (up to 2.5x)
Optics: Changeable lenses with manual focus
Hands free operations with USB foot control
Mounting options:
•Loupe mount (universal/loupe specific attachment)
•Overhead light to Headband
•Gooseneck/flexible arm
USB 2 with detachable cable (USB micro connector)
Camera is fully powered through USB
Recording software: Win, Mac and Android
5 software licenses included/unit
Regulatory compliance:

INSTRUCTIONS FOR USE - futudent
2
oMDR 2017/745, classification I
microCam - is a miniature 1080p camera designed for loupe-mounting
applications.
Technical specifications for microCam
Resolution: 2.1 MPix / Full HD (video)
Full aluminum body
Weight: 18 grams (0.63 ounces)
Dimensions: 30 x 20 x 20 mm (1.18 x 0.79 x 0.79 inches)
SONY IMX sensor
Optics: Changeable lenses with fixed focus
Hands free operations with USB foot control
Mounting options:
•Loupe mount (universal/loupe specific mounts)
•Overhead light o Headband
•Gooseneck/flexible arm
USB 2 with detachable cable (USB mini connector)
Camera is fully powered through USB
Recording software: Win, Mac and Android
5 software licenses included/unit
Regulatory compliance:
oMDR 2017/745, classification I
1.2 A complete sales unit include:
Cardboard camera case
Camera (with 16mm or with 25mm lens)
Camera box
USB camera cable 1,5m
Screwdriver
Cloth clip
Universal loupes clip
Spiral Temple Clip
System setup quick guide
Focus assistant card
Installation Kit:
1pc universal overhead light attachment
1pc USB control pedal
1pc USB 5m camera cable
1pc 5m USB extension cables
Cable clips:
40 pc cable clips
(15pcs flat cable clips,
15pcs curvy cable clips and
10pcs extension cable clips)
Instructions for Use
2. Preparation
It is recommended to test recording prior the treatment to ensure
colors are acceptable for use, see further instructions for color
adjustment 7.5.
Ensure lighting conditions are sufficient and test the camera
image before the treatment, see further instructions for sufficient
lighting in 7.6
2.1 Camera Set up
2.1.1 Install on loupes
Loupe mounted filming provides the ultimate, unobstructed point-of-view
(POV) angle of the procedure. Aligning the camera with the loupes and
LED headlight makes it easy to work without focusing on filming. Simply
work as usual, and everything seen through the loupes is being filmed in
perfect focus and detail.
Benefits:
Unobstructed point-of-view advantage
Always in focus with the loupes
No need to look at a screen to orient
2.1.2 Mount to the overhead light
Mounting a camera to the overhead light is an easy and effective way to
integrate camera technology into every operatory room. The overhead
light is an ideal location for capturing images and videos without
interrupting the procedure. Videos and pictures can be taken easily with
the foot control. The camera is always available when connected to PC
and SW is running, to get high quality documentation of any procedure
the moment it’s needed.
Put the self-adhesive light connector in an optimal location aligned
with the light. (NOTE: Do not stick on a surface heating over 50°C
as it will melt the glue on the connector)
Attach cables to the arm with the cable clips
Reinstalling - removing cable clips and overhead light attachment
(do not use sharp tools when reinstalling clips and attachment).
Benefits:
Stable footage
Always available
Aimed with the light
2.1.3 Mount to the flexible arm (optional accessory)
Mounting the camera to a flexible arm provides a stable, close-up image
for many applications like filming in labs, schools and training centers.
Benefits:
Stable footage
Always available
Close ups and flexible aiming
2.1.4. Focusing the camera
When taking camera in use, camera needs to be focused based on
working distance.
Find the Focus Card in the camera case
Mount the camera as you intend to use it - on loupes or overhead
light
Place the focus card at your normal working distance
Aim the camera
If using loupes, look at the center of the focus card through your
loupes
Align the camera to the center of the focus card
Focus the camera by carefully turning the lens
Try to get the thin lines as sharp as possible
2.2 Install Futudent Recording Software
futudent recording software is for dental solutions including cloud service. It
is applied for eduCam / microCam / proCam and it is available for
Windows, Mac, and Android.
Go to our website: https://www.futudent.com/services/software
Log in or create a futudent account to access the download page.
Download and run the installation file.
2.2.1 System requirement check
We recommend you check that your computer system meets the basic
requirements before installing the Futudent recording software.
We strongly recommend regularly checking and installing updates for
your operating system and applications.
All the requirements are available at:
https://www.futudent.com/services/software#basic-system-requirements
2.2.2 Hardware Requirement for Windows OS
Personal computer (Windows 7 or later)
NET Framework 4.5
4GB RAM or higher
USB2 or USB3 port for the camera + additional USB port for foot
control pedal
How to find your computer specifications Windows
(Windows 10 similar process on Windows 7 & 8)
Check Windows version, processor, and RAM
To open System information, right-click the Start icon and select
System
System specifications are displayed as below

INSTRUCTIONS FOR USE - futudent
3
Check your CPU rating
•Open www.cpubenchmark.net in a web browser
•Click on Search for your CPU model
•Use the search field to find your CPU model by entering your CPU
model number (typically found under System Information) into the
search field
•Your CPU rating is displayed in the Passmark CPU mark column
Check/change screen resolution
To open Advanced display settings, Search for screen resolution from
the Start menu and select Change the screen resolution.
Check current screen resolution and change if necessary. Screen
resolution of 1024x768 or higher is required.
Click Apply to apply and save any changes.
Check USB port
To open Device Manager, right-click the Start icon and select Device
Manager.
Expand the Universal Serial Bus Controllers option and check that you
have either USB2 or USB3.
Check Graphic card
To open Device Manager, right-click Start icon in the bottom left
corner of screen and select Device Manager.
Expand Display adapters to check if you have the Intel graphics card.
Minimum requirement for HD (720p) mode recording
CPU rating over3000
Screen resolution of 1024x768 or higher
Minimum requirement for Full HD (1080p) mode recording
Hardware encoding (QuickSync technology)
Intel i5 or i7 (lvy Bridge or never) processor
Intel graphics card
CPU rating over 4000
Without hardware encoding: CPU rating over 5000
Screen resolution of 1024x768 or higher
Recommended for Full HD (1080p) mode recording
Intel 5 or i7 (Broadwell or newer) processor
CPU rating over 5000
Screen resolution of 1920x1080 or higher
Minimum requirements for 4K (2160p) recording on Windows:
Windows 10 computer, Intel i5/i7 7th generation processor with at
least 6000 points in CPU benchmark.
In order to see all the details in 4K videos, you need to have a 4K
(3840x2160) capable screen.
Note that you can connect your PC to external 4K screen (even your computer
screen is not a 4K resolution screen).
Recommended for 4K (2160p) recording
CPU rating over 10000*
Screen resolution of 1920×1080 or higher
2.2.3 Hardware requirements for Mac
OS X version 10.13 (High Sierra) or newer
Minimum 8GB RAM
MacBook Air/Pro 2013 or newer
USB port for the camera + additional USB port for remote control
pedal
Minimum requirement for 720p mode
•(Macbook Pro/Air, iMac, Mac-mini) 2013 or later
Minimum requirement for 1080p mode
•(Macbook Pro/Air, iMac, Mac-mini) 2015 or later
Recommended for 2160p mode (proCam only)
•(Macbook Pro, iMac, Mac-mini) 2017 or later
How to find your Mac's system information
•Select About this Mac from the Apple Menu (top left corner)
•Mac OS version and other system information is displayed
•Select Displays to view screen resolution
2.2.4. Hardware requirements Android OS
Android 9.0 (Pie) or later
64bit CPU
4GB RAM or higher
OTG adaptor
USB2 or USB3 port for the camera
2.2.5 Download the software to computer
Recording software is used for taking picture and recording videos during
the treatments. Photos and videos are saved locally on your computer in
the predefined folders. Photos and videos can also be uploaded to the
Futudent cloud for secure sharing with patients or colleagues (futudent
software). All videos are recorded in h.264 mp4 format. (Referring to 2.2)
2.2.6 Download the futudent App to Android mobile devices
Search for “Futudent” in the App Store/Google Play Store
Click install and follow the prompts to complete the installation.
Connect the camera to your mobile device with an active USB cable
and OTG (on-the-go) adapter.
Start the Futudent app and grant all required permissions (only
required first time app is run)
Live feed from camera should now be visible - if not visible,
disconnect camera and reconnect after a few seconds.
3. Using the device
3.1 Introduction of recording software
After you have installed the device to light/loupe/flexible arm, connect the
camera cable to the camera and plug foot pedal cable to your computer.
If your set up needs an extension cable to reach the pc, use the provided
active USB extension cable (5m long) to connect the camera to the pc.
Open the Futudent recording software by double clicking the application
icon.
In the software, you have following options:
Camera settings
Select active camera and check resolution and frame rate for your
camera.
Start / Stop Recording
On-Screen - click the camera icon to take a still photo.
Foot pedal - press the pedal for 3 (three) seconds to start or stop
recording. To create a bookmark during recording press pedal
briefly.
Keyboard - press the F6 key for 3 (three) seconds to start or stop
recording. To have a bookmark during recording press F6 key
briefly.
Taking Photo
•On-screen - click the camera icon to take a photo
•Foot pedal - press the pedal briefly to take a photo
•Keyboard - press the F6 key briefly to take a photo.
Microphone
A microphone is not integrated in the camera: Choose any
microphone connected to the PC in the software.
The microphone is on by default. The microphone can be
muted/unmuted by clicking the microphone icon in the software.
Resolution, white-balance and brightness settings are available
Automatic White balance can be selected from Camera settings in
the software.
White Balance locking for the microCam
You can lock the white balance setting. This keeps colors
constant during recording and eliminates fluctuation in white
balance if the lighting is varying. Open Camera settings and select
Lock WB.
Gallery
Saved photos/recordings can be viewed, deleted and uploaded to
cloud or shared with patients or colleagues.
Photos are stored in JPG format in the Futudent Photos folder
on the desktop (by default).
Bookmarks are created by tapping the foot pedal or clicking the
camera icon during recording. This allows finding specific moments
easily, and you can move between bookmarks using up/down arrow
keys. Further instructions or notes can be added to the bookmarks
during replay, and additional bookmarks can be added by clicking
the camera icon during video playback.
Videos are h.264 mp4 format and editing videos can be done with
third-party software.
3.2 Share videos from Futudent recording application over the
cloud

INSTRUCTIONS FOR USE - futudent
4
Before applying the function, you would need to have a Futudent account.
Open www.futudent.com in a web browser and select Register in
the top right corner of the page. Follow prompts to set up your
Futudent account.
If you already have a Futudent account, please select Login and enter
your login details.
3.2.1 Send to the patient via application
Start the Futudent recording application and log into your Futudent
account to view recordings in your gallery.
A login window is automatically opened when the recording
application is launched.
Alternatively, log in by clicking on the Gallery button in the bottom
left corner of the application and then Login button in the top left
corner of the gallery panel.
Select Save and Share after making a new recording or click on the
video you wish to share in the gallery and select Upload / Send.
On the” Send to Patient” tab, fill in the following fields:
•Patient's email address
•Subject
•Personal Message
•You can share additional files as follows:
•Click “Add file”.
•Select the files from your computer and click “Open”.
•Click” Send”.
Patient will receive a link to the shared recording by email. They
will need to log in/Register to view video(s).
Videos shared to patients automatically creates a free user account
on mydentalbook.com for the patient.
The mydentalbook.com secure cloud platform can be used in
communication with patient.
3.2.2 Send to the colleagues via application
Start the Futudent recording application and log into your Futudent
account to view recordings in your gallery. A login window is
automatically opened when the recording application is launched.
Alternatively, log in by clicking on the Gallery button in the bottom
left corner of the application and then Login button in the top left
corner of the gallery panel.
Select Save and Share after making a new recording or click on the
video you wish to share in the gallery and select Upload / Send.
On the “Send to Colleague” tab, fill in the following fields:
•Colleague's email address
•Subject
•Personal Message
•You can share additional files as follows:
•Click “Add file”.
•Select the files from your computer, and click “Open”
•Click 'Send'
Colleague will receive a link to the recording on the futudent.com
secure dental professional cloud platform by email. They will need
to log in/create a Futudent account to view case(s).
3.3 Share via the Futudent Clould Service
3.3.1 Uploading recordings to Futudent cloud via recording
software
Log in to your Futudent account.
Start the Futudent recording application and log into your Futudent
account to view recordings in your gallery. A login window is
automatically opened when the recording application is launched.
Alternatively, log in by clicking on the Gallery button in the bottom
left corner of the application and then Login button in the top left
corner.
Select Save and Share after making a new recording or click on the
video you wish to share in the gallery and select “Upload / Send”.
Select the” Upload” tab and click the Upload button to begin
upload.
Log in to your Futudent cloud account from www.futudent.com to
view uploaded videos.
Uploading recordings to Futudent cloud via web browser
Open www.futudent.com and log in to your Futudent account. If
you do not have a Futudent account, select Register in the top of
the webpage and follow the prompts to set up your Futudent
account.
Click “Upload” button in the top right corner of your Futudent
homepage.
Fill in the Title, Description (optional), and Category of the
recording you wish to upload.
Click “Choose file” to browse your computer and select the file you
wish to upload.
Click “Upload”.
3.3.2 Share recordings to the colleague via Cloud
Open www.futudent.com and sign in to your Futudent cloud
account.
From the Tasks menu on the left, click Add Case
Enter the case title and description
Enter an email you would like to share your case with and click Add
User. You can do this for as many people as you would like to add.
Media icon to select a recording from your Futudent cloud account
or upload a new recording from your computer.
4. Maintenace and Disposal
4.1 Cleaning
With proper care, your camera and its optical-electrical parts will have a
long life. Cleaning and disinfection recommended being made as follows:
Disinfecting can be done using low-alcohol disinfectant.
Use a wipe to clean the device.
Remember to squeeze excess fluid out of the cloth/wipe before
cleaning the device.
When cleaning:
Do not directly spray any liquid onto the device.
Do not sink the device into the water or put it under running
water.
Never spray the device with detergent or any other liquid.
Do not use autoclave for the device.
Do not use a cleaning detergent with alcohol concentration more
than 70%.
4.2 Service
It is recommended always to check the camera and accessories before
the operation:
Check all the parts are tightly attached
Check the cables are not worn or damaged and not left on the
floor.
Make sure User Instructions are available for users.
Futulight (if purchased) battery is charged.
4.3 Annual check
It is also recommended to make annual check for cameras as follows:
Inspect that all hardware (camera and accessories) is in good and
clean condition, no external damages to be seen.
Instructions are available.
Check that you are using the latest software version, if not, update
the latest version of the software.
4.4 Disposal instruction
Dispose the camera according to the rules defined in your country.
Generally, the device must be brought to an appropriate collection point
for electronic waste, such as a home appliance dealer or an official
electronic waste collection point. The device may also be sent back to the
seller or manufacturer.
Never throw Futulight li-ion batteries in the trash. This causes pollution
and can be a fire hazard. To properly dispose li-ion batteries, take them
to a battery recycling location or contact your local waste management
service provider for disposal instructions. Put batteries in a sealed metal
container before recycling them.
5. Warranty
5.1 Warranty period
The standard limited warranty for Novocam Products is two (2) years
from the date of original purchase, with the following exceptions: 1.
Accessories are covered by a standard one (1) year warranty 2. Software
incorporated in the Products is covered by End User License Agreement
(EULA) and its warranty terms. Up-to date EULA is made available
https://www.futudent.com/contact/about/terms-of-service which EULA
must be accepted prior or during Software installation. Warranty period
starts when the product is delivered and/or given to the Buyer.
This limited warranty covers defects in materials and workmanship in the
Products and Accessories.

INSTRUCTIONS FOR USE - futudent
5
This limited warranty does not cover any damage, deterioration or
malfunction resulting from any alteration, modification, improper or
unreasonable use or maintenance, misuse, abuse, accident, neglect,
exposure to excess moisture, fire, lightning, power surges, or other acts
of nature. This limited warranty does not cover any damage,
deterioration or malfunction resulting from any unauthorized tampering
with the Product or Accessory, any repairs attempted by anyone not
authorized by Novocam Medical Innovations Oy to make such repairs, or
any other cause which does not relate directly to a defect in materials
and/or workmanship of the Product or Accessory.
This limited warranty is void if (i) the label bearing the serial number of
the Product and/or Accessory has been removed or defaced, (ii) the
Product and/or Accessory is not distributed by Novocam or (iii) the
Product and/or Accessory is not purchased from an authorized Novocam
distributor. Your rights under the limited warranty are not diminished if
you do not complete and return the product registration form or
complete and submit the online product registration form.
Operator may not be held liable for defects or dysfunction of the
Software and/or the Service due to (i) lack of qualification and
competence on the part of the persons using it, and/or (ii) changes made
by the Licensee, a third party other than Operator or not previously
certified in writing by Operator, and/or (iii) software and/or equipment is
not supplied and installed by Operator or its authorized distributor.
5.2 Remedy
Novocam will at, at its sole option, provide one of the following three
remedies to whatever extent it shall deem necessary to satisfy a proper
claim under this limited warranty:
Elect to repair of any defective part within a reasonable period of time,
free of any charge for needed parts and labor to complete the repair and
restore the Product and/or Accessory to its proper operating condition.
Novocam will also pay the shipping costs necessary to return the
Products and accessory once the repair is complete.
Replace the Products and/or Accessory with a direct replacement
or with a similar product deemed by Novocam to perform
substantially the same function as the original Product and/or
Accessory.
Issue a refund of the original purchase price less depreciation to be
determined based on the age of the Product and/or Accessory at
the time remedy is sought under this limited warranty.
If this Product and/or Accessory is returned to Novocam or the
auhorized distributor from which it was purchased, or any other
party authorized to repair Novocam products, The Product and/or
accessory must be insured during shipment, with the insurance and
shipping charges prepaid by Buyer. If the Product and/or Accessory
is returned uninsured, Buyer assumes all risks of loss or damage
during shipment.
5.3 How to obtain remedy
To obtain a remedy under this limited warranty, Buyer must contact
either the authorized Novocam distributor whom the Product and/or
Accessory was purchased from Novocam. In order to pursue any remedy
under this limited warranty, you must possess an original, dated receipt as
proof of purchase from an authorized Novocam distributor. If the
Product and/or Accessory is returned under this limited warranty, a
return authorization will be required from Novocam, Buyer may also be
directed to an authorized distributor or a person authorized by Novocam
to repair the Products and/or Accessory. If it is decided that the Products
and/or Accessory should be returned directly to Novocam, the Product
and/or Accessory should be properly packed for shipping.
6. Available accessories
Novocam provides also following futudent optional accessories.
They are available at our company web shop:
https://www.futudent.com/shop
6.1 Camera Lenses
Lenses are designed to be used in operatory rooms and they offer
exceptional depth of view.
Available lenses:
8mm lens, UHD 5MP, 1-1.5X magnification, wide angle
16mm lens, UHD 5MP, 2X magnification, optimal for
loupe/gooseneck mounting
25mm lens, UHD 5MP, 4X magnification, optimal for light mount
6.2 Futulight
Futulight is a LED headlight designed for futudent cameras and it provides
optimal image quality for videos and still photos.
Technical specifications:
Charger: 110V-220VAC, 50-60Hz
Battery capacity: 3,7V 4400mAh
Battery life: With full intensity about 9h, with 50% intensity about
13h
Charging time to reach full charge: 10h
Max output: 32 000LUX, linearly adjustable
Color temperature: ~6500K Light spot size: Approximately 7cm
diameter from 25cm distance
6.3 Installation kit
Installation kit contains accessories needed to install a camera for an
operatory room, content described in 1.2.
6.4 Flexible arm / Gooseneck
The flexible arm can be mounted on tables, chairs, light fixtures and other
fixed positions. Base with clamp is 60cm, extension part 50cm.
6.5 Headband
The lightweight headband for mounting the camera. The cables can be
integrated within the soft padding.
6.6 Light and Loupe Attachments
Novocam has wide library of attachments available for various loupes and
headlights. Novocam continuously develops the attachment library based
on customer requests.
6.7 Wireless pedal
You can buy optional wireless pedal to your device. Plug the wireless USB
receiver into a free USB port in your computer or USB host device. You
can now check the successful operation of the devices by pressing and
releasing the pedal –an LED on the USB receiver will briefly flash every
time the pedal is pressed. The wireless pedal can now be positioned up to
10 meters from the USB receiver.
6.8 Isolator
The camera is connected to a computer via USB. However, if
electrocautery/surgery devices are used or if the computer used is not
medical grade in a medical environment, an isolator needs to be used to
ensure conformity. If you need to purchase an isolator, please contact
futudent support.
6.9 Other Attachments
Overhead light attachment
Cable clips, curved, flat, extension cable clips
Take special attention when unpacking to verify all components listed in
the packing list are present.
7. Trouble shoot
7.1 Camera stops functioning
Electrocautery or electrosurgery device is taken in use while the camera
is attached to the loupes. Several cases have been noted where the
camera stops functioning which seems to be connected to a leakage
current / interference conducting through the USB cables.
A solution: USB isolator should to be taken in use between the camera
and the computer when using electrocautery or electrosurgery device
(see also 6.8.).
7.2 Futudent recording software cannot open or frozen
frequently
If recording software do not open after software installation on the
computer / mobile device or software is not operational.
A solution: Futudent recording software are hardware and software
dependent, we strongly recommend reading the system requirements list
(section 2.2.1) before installing. Update your PCs, mobile devices and
software regularly.
7.3. Camera is not detected
After installing the software and connecting the camera to the PC, the
software screen still shows” camera not detected!”, clicking the ”refresh”
button does not seem help.
A solution (Windows):
Go to ”control panel” -> ” Device Manager” or search ”Device
manager” by clicking on the ”camera” button. Right click on camera
name (eduCam, proCam or microCam) to do the uninstallation and

INSTRUCTIONS FOR USE - futudent
6
installation it again. After that try ”refresh” button on software
screen.
If the camera cannot be found in ” Device manager -> Camera” list,
please try with other available devices. If the camera still cannot be
detected, we would suggest trying with other connecting cables. If
this does not help, contact your local support point or
manufacturer.
7.4. Camera signal is not stable
The camera connecting signal is unstable, recording cannot continue.
A solution: Double check that all USB ports and joints are fatigued.
Carefully check that all cables are integrated. Note: If serval extension cables
are used at the same time, it may affect the performance of the camera. Try
using a shorter extension cable.
If you want to learn more about the device, we kindly recommend that
you read the "Futudent user guide" page in relavent topics. This page can
be found on our website: https://www.futudent.com/support/user-guide
7.5 The camera’s color representation differs from human
perception
Sometimes camera color settings are inaccurate, or monitors / screens
are not presenting colors correctly.
A solution: Following procedures can be done to correct colors:
for adjusting color settings, test color palette can be used for
comparison purpose.
camera color adjustments (brightness, contrast, hue, saturation,
white balance) can be done in the camera control panel in the
software.
color adjustment to monitors can be adjusted on the monitor or
operating system.
Reference color samples are recommended to be used to ensure
color accuracy.
7.6 Camera’s image quality is low
Camera’s image quality can look low due to insufficient lighting conditions.
A solution: In general, good quality recordings can be achieved when
sufficient quality of light is available.
Ensure the light intensity (recommendation more than 10 000 lux)
and color spectrum of light (recommended CRI is over 80) is
sufficient for using the device.
8. Support and contact
8.1. Contact local partner
Our devices have been distributed by our partners in each country
worldwide. We would advise you to contact your local reseller where
you have purchased the device as first help. They may help you directly
and immediately.
8.2. Contact Futudent support
You always can reach our support team by visiting our website
https://www.futudent.com/support
You may
Submit a ticket
Call us directly by the numbers:
Europe and Rest of the World: [phone]
North America (24/7): [phone]
Request set a remote support session
Send an email [e-mail]
8.3. Contact manufacturer
You are welcome to contact by filling the General contact form on our
website either via www.futudent.com or via email [email protected]
Novocam Medical Innovations Oy
Pohjoisranta 6
00170 Helsinki, Finland
www.futudent.com
Phone [phone]