Futureglass Orsa MC1-R-24 User manual

Mirror Cabinet
Installation Guide
(Recessed Installation)
For Models:
Orsa MC1-R-24
Orsa MC1-R-36
Shira MC1-AR-40X18
Ruma MC1-PL-32X16
Ezri MC1-SQ-32X24
Ezri MC2-SQ-32X36
Ezri MC3-SQ-32X48

Stud
Finder 2x4 Lumber
Plus:
• Wire Cutter/Stripper
• Assorted Drill Bits
• Framing and Drywall Tools
• Framing and Drywall Fasteners
Tools and Materials
Before You Begin
NOTICE: Risk of property or product damage. The location of the cabinet is critical. Make sure that
the door will clear all obstacles (such asafaucet or light fixture). Ensure that any obstacles behind
the finished wall will not be damaged during the cutting and/or drilling process.
IMPORTANT! Reroute any electrical wires or water supply piping from the wall cavity. If you encounter
drain or vent piping or if your wall is load-bearing, consultaprofessional before proceeding.
NOTE: Recessed-Mount Installation: The wall cavity must be framed. The cabinet must be secured to
the framing studs.
Observe all local building codes.
The appearance of your recessed cabinet may differ from the recessed cabinet illustrated. The
installation steps still apply.
This installation is easiest when performed by two people.
When determining the height of the product, verify that the doors will clear all obstacles (such as
a faucet or light fixture). A minimum distance of 3” (76 mm) is required.
Caution: Risk of personal injury. Cabinets are very heavy.
Get assistance for lifting and moving the cabinets

If for any reason you are having trouble with installation, or if the size
of the product does not fit your designated space, please contact
Future Glass directly and do not return this product to place of purchase.
Future Glass takes pride in providing quality products and customer
service. We want to ensure your happiness with your purchase for years
to come. We have an extensive range of sizes, so no maer what your
measurements are, Future Glass can supply the product to fit!
If you have any questions, please do not hesitate to reach out to us.
Thank you again for choosing Future Glass!
Best Regards,
The Team at Future Glass
[phone]
[e-mail]
Thank you
for your purchase.

Installation Guide
Included in your purchase
ACabinet Body
BScrew (For wooden frame)
CGlass shelf
DShelf clip
ECover plate for hinge
A
B
C
D
X 4
X 2
X 8
Preparation
IMPORTANT:
The dimensions of the cabinet body
may be vary from actual item. Please
measure the exact item before making
cutout.
Measuring the cabinet body of the actual product.
Model MC1-AR-40X18 (H: 40” / W: 18” / 1 Door)
EX 3
A
B
C
D
X 4
X 1
X 4
Model MC1-R-24 (Dia.24” / 1 Door)
EX 2
A
B
C
D
X 4
X 2
X 8
Model MC1-R-36 (Dia. 36” / 3 Doors)
EX 3

Included in your purchase
ACabinet Body
BScrew (For wooden frame)
CGlass shelf
DShelf clip
ECover plate for hinge
Preparation
IMPORTANT:
The dimensions of the cabinet body
may be vary from actual item. Please
measure the exact item before making
cutout.
Measuring the cabinet body of the actual product.
A
B
C
D
X 4
X 4
X 16
Model MC2-SQ-32X36 (H: 32” / W: 36” / 2 Doors)
EX 4
A
B
C
D
X 4
X 4
X 16
Model MC3-SQ-32X48 (H: 30” / W: 48” / 3 Doors)
EX 6
A
B
C
D
X 4
X 2
X 8
Model MC1-SQ-32X24 (H: 32” / W: 24” / 1 Door)
EX 2

Included in your purchase
ACabinet Body
BScrew (For wooden frame)
CGlass shelf
DShelf clip
ECover plate for hinge
Preparation
IMPORTANT:
The dimensions of the cabinet body
may be vary from actual item. Please
measure the exact item before making
cutout.
Measuring the cabinet body of the actual product.
A
B
C
D
X 4
X 1
X 4
Model MC1-PL-32X16 (H: 32” / W: 16” / 1 Door)
EX 2

Disassemble the cabinet door(s)
After taking out the cabinet, disassembling the
door(s).
The door(s) can be quickly removed by pushing the
button on hinge.
Unclipping the door from the mounting plate.
02
Construct the framing
IMPORTANT:
The dimensions of the cabinet body
may be vary from actual item. Please
measure the exact item before making
cutout.
When determining the height of the product, verify
that the doors will clear all obstacles (such as a
faucet or light fixture). A minimum distance of 3”
(76 mm) is required.
Measuring the cabinet body of exact item.
Usingajigsaw or keyhole saw, carefully remove
the finished wall material from the marked cutout.
Frame out the wall cavity. If needed, installaheader.
01

Install the glass shelf(shelves)Install the cabinet body into the framing
Make sure hinges are on correct side of opening for
left hand or right hand operation.
Place cabinet body into framing.
Insert four (4) wood screws into four locations provided
for recessed installation. Be careful not to overtighten.
Make sure cabinet is centered in framing.
Determine the shelf(shelves) locations and insert the
slotted pins into the holes in the sides of the cabinet.
Install the shelf(shelves) between the slots of the pins
and then, tighten the plastic screw at bottom of each
clip. Be careful not to overtighten.
Wood screws (4)
Important: Enclosed screws are for
wooden frame only. Appropriate anchors
and screws need to be purchased for
installation into non wooden frames.
0403

Adjusting hinges - To make the door(s) in correct
position
Reassembling the door(s)
After install the glass shelf (shelves) in right position,
reassembling the door(s).
Clamp hinge on the mounting plate as shown
by direction arrow.
Press down the hinge arm to lock the plate as shown.
Front to back adjustment - Turn the screw “A” clockwise or
anti-clockwise for moving the door Inward or Outward.
Lateral adjustment - Turn the screw “B” clockwise or
anti-clockwise for moving the door Left or Right.
Vertical adjustment - Turn the screw “A” clockwise or
anti-clockwise for moving the door Up or Down.
Important: For products with more than
one door, please make sure you assmble
the doors in correct sides by matching the
same letters sticked on the mounting plate
on cabinet body and hinge arm on door.
0605

Design your
Perfect Space
Visit our Shower Door Designer to find the
enclosure that fits your space perfectly.
GLASSWAREHOUSE.US
Featured Model: Eclipse