G.SKILL RIPJAWS SV710 User manual

1.15j
G.SKILL RIPJAWS SV710
Gaming Headset
Software User Manual

Table of Contents
Software Installation
1.1 Installation
1.2 Uninstallation
Control Panel
2.1 Opening the Control Panel
2.2 Control Panel Functions
2.2.1 Main Volume Control
2.2.2 Equalizer
2.2.3 ENC (Environmental Noise Cancellation)
2.2.4 Advanced Audio Options
2.2.4.1 Stereo
2.2.4.2 Dolby Pro Logic IIx
2.2.4.3 Virtual 7.1 Surround
2.2.5 Software Setting and Info
…………………………………………………………………………………………. 3
…………………………………………………………………………………….. 7
……………………………………………………………….. 11
…………………………………………………………………… 12
………………………………………………………….. 13
……………………………………………………………………………… 14
…………………………….. 15
…………………………………………………….. 16
…………………………………………………………………….. 16
………………………………………………….. 17
……………………………………………….. 18
……………………………………………………. 20
2

Driver and Software Installation
1.1 Installation
NOTE: The G.SKILL RIPJAWS SV710 requires driver and software installation prior to use.
NOTE: Make sure the G.SKILL RIPJAWS SV710 headset is connected to your system in a
USB socket before installing the driver and software. Otherwise, the following error
message will be displayed.
1. Download the driver and software installer from the G.SKILL website:
http://www.gskill.com/en/
2. Double click “setup.exe” and the InstallShield Wizard will guide you through installation.
3

3. Click “Next” to continue installation.
4. Read and choose to accept the terms of the license agreement, then click “Next” to
continue installation.
4

5. Click “Next” to begin copying files for installation.
6. Installation may take a few minutes. Please wait patiently for the installation to
complete.
5

7. When the G.SKILL RIPJAWS SV710 driver and software installation is finished, please
restart your computer to complete the installation process.
6

1.2 Uninstallation
NOTE: Close all audio related programs before uninstalling the “G.SKILL RIPJAWS SV710”
software.
1. Windows XP:
Go to Windows Control Panel >> Add or Remove Programs
Windows 7/8/8.1:
Go to Windows Control Panel >> Programs >> Programs and Features >> Uninstall a
program
Windows 10:
Go to Settings >> System >> Apps & features
2. Select “G.SKILL RIPJAWS SV710” and click “Uninstall”, or double click on “G.SKILL
RIPJAWS SV710” to begin uninstallation.
7

3. Confirm that you have closed all audio related programs, and then click “OK” to continue.
4. Click “Next” to continue.
8

5. Click “Yes” to confirm uninstallation of G.SKILL RIPJAWS SV710 software.
6. Uninstallation may take a few minutes. Please wait patiently for the uninstallation to
complete.
9

7. When the G.SKILL RIPJAWS SV710 driver and software uninstallation is finished, please
restart your computer to complete the uninstallation process.
10