Color Variants
VI424610
Stainless steel frame
Width 15 ''
Installation Accessories
VA420000
Connection strip for combination with
other Vario appliances of the 400 series
for flush installation
VA420001
Connection strip for combination with
other Vario appliances of the 400 series
for flush installation with appliance
cover/filler strip
VA420010
Connection strip for combination with
other Vario appliances of the 400 series
for surface mounting
VA420011
Connection strip for combination with
other Vario appliances of the 400 series
for surface-mount installation with
appliance cover/filler strip
VA440010
Stainless steel cover with mounting
strip
VA450400
Stainless steel adjustment strip 15"
VI424610
Vario induction cooktop 400 series
Stainless steel frame
Width 15 ''
2 cooking zones with booster
function
Total output 3,600 W
Solid stainless steel control knob
Precision crafting of 1/8-inch
stainless steel
For surface mount installation with a
visible edge or for flush installation
Can be perfectly combined with other
Vario 400 series products
Cooking zones
One ø 8 1/4" induction cooking zone
(2,200 W, 3,300 W with booster).
One ø 5 7/8" induction cooking zone
(1,400 W, 1,800 W with booster).
Operation
Control knobs with illuminated
ring, cooking zone and output level
markings.
Electronic control in 12 output levels.
Features
Cooking zone marking.
Booster function for each cooking
zone (only one zone at a time can be
operated with booster function)
Pan detection.
Short-term timer.
Safety
Individual residual heat indication.
Safety lock.
Planning notes
Depending on the type of installation
- surface-/ or flush-mounted, with or
without cover - the specific location of
the control knob positions may vary.
When using the appliance cover VA 440
or adjustment strip VA 450 additional
space for cut-out depth needs to be
considered.
In a combination of Vario cooktops
with at least one appliance cover, the
adjustment strip VA 450 is required.
In a combination of several Vario 400
series cooktops a connection strip
must be used. Depending on the type
of installation - surface-/ or flush-
mounted, with or without cover - the
respective VA 420 connecting strip
must be used.
For flush installation the edge height
in the cut-out needs to be at least 1/2"
and for surface-mount 3/8". Ensure a
continuous cut surface of 90°.
The weight capacity and stability,
especially in case of thin countertops,
must be supported using suitable
substructures. Take the appliance
weight and additional loads into
account.
Flush installation is possible in
countertops made of stone, synthetics
or solid wood. Heat resistance and
watertight sealing of the edges must
be observed. For other materials,
please consult with your countertop
manufacturer.
The groove must be continuos and
even, so that uniform placing of the
appliance on the gasket is ensured. Do
not use discontinuos lining.
The joint width may vary due to size
tolerances of the combinations and of
the countertop cut-out.
If installing several Vario products in
individual cut-outs allow for a minimum
distance of 2" inbetween the cooktops.
Operates with magnetic (induction)
iron pots and pans only. For an optimal
heat distribution, the use of sandwich
bottom cookware is recommended.
Product Features
Product name / series name
Vario/Domino cooking zone cera
Construction type
CONSTR_TYPE.Built-in
Energy source
Electric
Total number of cooktop burners
2
Required cutout size (HxWxD) (mm)
90 x 360 x 490-500
Width of the product (mm)
380
Overall appliance dimensions (HxWxD)
(mm)
90 x 380 x 520
Product packaging dimensions
(HxWxD) (mm)
144 x 579 x 658
Net weight (kg)
8.438
Gross weight (kg)
10.0
Residual heat indicator
Separate
Location of control panel
External control
Basic surface material
Ceramic
Color of surface
Black, Stainless steel
Color of frame
Stainless steel
Approval certificates
CSA
Power cord length (cm)
96
Consumption and connection features
Watts (W)
3600
Gas connection rating (W)
Current (A)
16
Volts (V)
208-240
Frequency (Hz)
50; 60
2019-10-23
Page 1
Built-in control panel can be integrated
in the bottom cabinet at drawer level.
Front panel thickness 5/8" - 1".
The drawing "Installation of the control
knob" must be observed if the panel
is more than 1" thick (there must be
a recess at the rear for proper control
module installation).
Appliance clicks into place when
inserted into the countertop from
above.
Appliance weight: approx. 22 lb.
Rating
Total rating 3.6 kW.
Total Amps: 16 A.
208 - 240 V / 50 Hz
Connecting cable 39 '' without plug
(hardwire required).
