Gaggenau BOP 210 1 2 Series User manual

Instruction manual
BOP 210/211 1.2
Oven

2
en
Table of contents
Instruction manual
8 Intended use 3
( Important safety information 4
] Causes of damage 6
7 Environmental protection 6
Saving energy 6
Environmentally-friendly disposal 6
* Familiarising yourself with your appliance 7
Oven 7
Display and operating controls 8
Symbols 8
Colours and display 8
Standby 9
Activating the appliance 9
Additional information (and )9
Cooling fan 9
Function selector positions 10
Accessories 10
Special accessories 11
K Before using the appliance for the first time 12
Setting the language 12
Setting the time format 12
Setting the clock 12
Setting the date format 12
Setting the date 12
Setting the temperature unit 12
Ending initial set-up 12
Heating up the oven 12
Cleaning accessories 12
1 Operating the appliance 13
Cooking compartment 13
Inserting accessories 13
Switching on 13
Rapid heating 13
Safety shut-off 13
O Timer functions 14
Calling up the timer menu 14
Timer 14
Stopwatch 14
Cooking time 15
End of cooking time 16
F Long-term timer 17
Setting the long-term timer 17
Ž Individual recipes 17
Recording a recipe 17
Programming a recipe 18
Entering names 18
Starting recipes 18
Change recipe 19
Deleting recipes 19
A Childproof lock 19
Activate the child lock 19
Deactivating the child lock 19
o Home Connect 20
Setting up 20
Remote Start 21
Home Connect settings 21
Remote diagnostics 22
About data protection 22
Declaration of Conformity 22
Q Basic settings 23
D Cleaning and maintenance 25
Cleaning agents 25
Removing the rails 26
. Catalytic cleaning (cleaning aid) 26
Preparing catalytic cleaning 26
Starting catalytic cleaning 26
3 What to do in the event of a fault 27
Power cut 27
Demo mode 27
Replacing the oven light bulb 28
4 After-sales service 28
E number and FD number 28
J Tables and tips 29
Vegetables 30
Side dishes and meals 31
Fish 33
Meat 34
Poultry 37
Grilling and roasting 38
Baked items 39
Desserts 44
Preserving 44
Disinfecting 45
Drying 45
Baking stone 46
Acrylamide in foodstuffs 47
Additional information on products, accessories,
replacement parts and services can be found at
www.gaggenau.com and in the online shop
www.gaggenau.com/zz/store

2
en
Table of contents
Instruction manual
8 Intended use 3
( Important safety information 4
] Causes of damage 6
7 Environmental protection 6
Saving energy 6
Environmentally-friendly disposal 6
* Familiarising yourself with your appliance 7
Oven 7
Display and operating controls 8
Symbols 8
Colours and display 8
Standby 9
Activating the appliance 9
Additional information (and )9
Cooling fan 9
Function selector positions 10
Accessories 10
Special accessories 11
K Before using the appliance for the first time 12
Setting the language 12
Setting the time format 12
Setting the clock 12
Setting the date format 12
Setting the date 12
Setting the temperature unit 12
Ending initial set-up 12
Heating up the oven 12
Cleaning accessories 12
1 Operating the appliance 13
Cooking compartment 13
Inserting accessories 13
Switching on 13
Rapid heating 13
Safety shut-off 13
O Timer functions 14
Calling up the timer menu 14
Timer 14
Stopwatch 14
Cooking time 15
End of cooking time 16
F Long-term timer 17
Setting the long-term timer 17
Ž Individual recipes 17
Recording a recipe 17
Programming a recipe 18
Entering names 18
Starting recipes 18
Change recipe 19
Deleting recipes 19
A Childproof lock 19
Activate the child lock 19
Deactivating the child lock 19
o Home Connect 20
Setting up 20
Remote Start 21
Home Connect settings 21
Remote diagnostics 22
About data protection 22
Declaration of Conformity 22
Q Basic settings 23
D Cleaning and maintenance 25
Cleaning agents 25
Removing the rails 26
. Catalytic cleaning (cleaning aid) 26
Preparing catalytic cleaning 26
Starting catalytic cleaning 26
3 What to do in the event of a fault 27
Power cut 27
Demo mode 27
Replacing the oven light bulb 28
4 After-sales service 28
E number and FD number 28
J Tables and tips 29
Vegetables 30
Side dishes and meals 31
Fish 33
Meat 34
Poultry 37
Grilling and roasting 38
Baked items 39
Desserts 44
Preserving 44
Disinfecting 45
Drying 45
Baking stone 46
Acrylamide in foodstuffs 47
Additional information on products, accessories,
replacement parts and services can be found at
www.gaggenau.com and in the online shop
www.gaggenau.com/zz/store
3
Intended use en
8 Intended use
Intendeduse Read these instructions carefully. Only then
will you be able to operate your appliance
safely and correctly. Retain the instruction
manual and installation instructions for future
use or for subsequent owners.
This appliance is only intended to be fully fitted
in a kitchen. Observe the special installation
instructions.
Check the appliance for damage after
unpacking it. Do not connect the appliance if it
has been damaged in transport.
Only a licensed professional may connect
appliances without plugs. Damage caused by
incorrect connection is not covered under
warranty.
This appliance is intended for domestic use
only. The appliance must only be used for the
preparation of food and drink. The appliance
must be supervised during operation. Only use
this appliance indoors.
This appliance is intended for use up to a
maximum height of 2000 metres above sea
level.
This appliance may be used by children over
the age of 8 years old and by persons with
reduced physical, sensory or mental
capabilities or by persons with a lack of
experience or knowledge if they are supervised
or are instructed by a person responsible for
their safety how to use the appliance safely and
have understood the associated hazards.
Children must not play with, on, or around the
appliance. Children must not clean the
appliance or carry out general maintenance
unless they are at least 15 years old and are
being supervised.
Keep children below the age of 8 years old at a
safe distance from the appliance and power
cable.
Always slide accessories into the cooking
compartment correctly. See description of
accessories in the instruction manual.

4
en Important safety information
m ( Important safety information
Import ant safetyinformation mWarning – Risk of fire!
▯Combustible items stored in the cooking
compartment may catch fire. Never store
combustible items in the cooking
compartment. Never open the appliance
door if there is smoke inside. Switch off the
appliance and unplug it from the mains or
switch off the circuit breaker in the fuse
box.
Risk of fire!
▯A draught is created when the appliance
door is opened. Greaseproof paper may
come into contact with the heating element
and catch fire. Do not place greaseproof
paper loosely over accessories during
preheating. Always weight down the
greaseproof paper with a dish or a baking
tin. Only cover the surface required with
greaseproof paper. Greaseproof paper
must not protrude over the accessories.
mWarning – Risk of burns!
▯The appliance becomes very hot. Never
touch the interior surfaces of the cooking
compartment or the heating elements.
Always allow the appliance to cool down.
Keep children at a safe distance.
Risk of scalding!!
▯The inside of the appliance door becomes
very hot during operation. Always open the
appliance door as far as it will go. Ensure
that the appliance door does not swing
back. Avoid contact with the inside of the
appliance door.
Risk of serious burns!
▯Accessories and ovenware become very
hot. Always use oven gloves to remove
accessories or ovenware from the cooking
compartment.
Risk of burns!
▯Alcoholic vapours may catch fire in the hot
cooking compartment. Never prepare food
containing large quantities of drinks with a
high alcohol content. Only use small
quantities of drinks with a high alcohol
content. Open the appliance door with
care.
Risk of burns!
▯Bulbs become very hot when switched on.
There is still a risk of burning for some time
after they have been switched off. Allow the
bulbs to cool down before cleaning the
appliance. Switch off appliance light during
cleaning.
Risk of burns!
▯Bulbs become very hot when switched on.
There is still a risk of burning for some time
after they have been switched off. Allow the
bulbs to cool down before replacing them.
mWarning – Risk of scalding!
▯The accessible parts become hot during
operation. Never touch the hot parts. Keep
children at a safe distance.
Risk of scalding!
▯When you open the appliance door, hot
steam may escape. Open the appliance
door with care. Keep children at a safe
distance.
Risk of scalding!
▯Water in a hot cooking compartment may
create hot steam. Never pour water into the
cooking compartment when the cooking
compartment is hot.
mWarning – Risk of injury!
Scratched glass in the appliance door may
develop into a crack. Do not use a glass
scraper, sharp or abrasive cleaning aids or
detergents.
mWarning – Risk of electric shock!
▯Incorrect repairs are dangerous. Repairs
may only be carried out and damaged
power cables replaced by one of our
trained after-sales technicians. If the
appliance is defective, unplug the
appliance from the mains or switch off the
circuit breaker in the fuse box. Contact the
after-sales service.
Risk of electric shock and serious injury!
▯The cable insulation on electrical
appliances may melt when touching hot
parts of the appliance. Never bring
electrical appliance cables into contact
with hot parts of the appliance.

4
en Important safety information
m ( Important safety information
Import ant safetyinformation mWarning – Risk of fire!
▯Combustible items stored in the cooking
compartment may catch fire. Never store
combustible items in the cooking
compartment. Never open the appliance
door if there is smoke inside. Switch off the
appliance and unplug it from the mains or
switch off the circuit breaker in the fuse
box.
Risk of fire!
▯A draught is created when the appliance
door is opened. Greaseproof paper may
come into contact with the heating element
and catch fire. Do not place greaseproof
paper loosely over accessories during
preheating. Always weight down the
greaseproof paper with a dish or a baking
tin. Only cover the surface required with
greaseproof paper. Greaseproof paper
must not protrude over the accessories.
mWarning – Risk of burns!
▯The appliance becomes very hot. Never
touch the interior surfaces of the cooking
compartment or the heating elements.
Always allow the appliance to cool down.
Keep children at a safe distance.
Risk of scalding!!
▯The inside of the appliance door becomes
very hot during operation. Always open the
appliance door as far as it will go. Ensure
that the appliance door does not swing
back. Avoid contact with the inside of the
appliance door.
Risk of serious burns!
▯Accessories and ovenware become very
hot. Always use oven gloves to remove
accessories or ovenware from the cooking
compartment.
Risk of burns!
▯Alcoholic vapours may catch fire in the hot
cooking compartment. Never prepare food
containing large quantities of drinks with a
high alcohol content. Only use small
quantities of drinks with a high alcohol
content. Open the appliance door with
care.
Risk of burns!
▯Bulbs become very hot when switched on.
There is still a risk of burning for some time
after they have been switched off. Allow the
bulbs to cool down before cleaning the
appliance. Switch off appliance light during
cleaning.
Risk of burns!
▯Bulbs become very hot when switched on.
There is still a risk of burning for some time
after they have been switched off. Allow the
bulbs to cool down before replacing them.
mWarning – Risk of scalding!
▯The accessible parts become hot during
operation. Never touch the hot parts. Keep
children at a safe distance.
Risk of scalding!
▯When you open the appliance door, hot
steam may escape. Open the appliance
door with care. Keep children at a safe
distance.
Risk of scalding!
▯Water in a hot cooking compartment may
create hot steam. Never pour water into the
cooking compartment when the cooking
compartment is hot.
mWarning – Risk of injury!
Scratched glass in the appliance door may
develop into a crack. Do not use a glass
scraper, sharp or abrasive cleaning aids or
detergents.
mWarning – Risk of electric shock!
▯Incorrect repairs are dangerous. Repairs
may only be carried out and damaged
power cables replaced by one of our
trained after-sales technicians. If the
appliance is defective, unplug the
appliance from the mains or switch off the
circuit breaker in the fuse box. Contact the
after-sales service.
Risk of electric shock and serious injury!
▯The cable insulation on electrical
appliances may melt when touching hot
parts of the appliance. Never bring
electrical appliance cables into contact
with hot parts of the appliance.
5
Important safety information en
Risk of electric shock!
▯Do not use any high-pressure cleaners or
steam cleaners, which can result in an
electric shock.
Risk of electric shock!
▯When replacing the cooking compartment
bulb, the bulb socket contacts are live.
Before replacing the bulb, unplug the
appliance from the mains or switch off the
circuit breaker in the fuse box.
Risk of electric shock!
▯A defective appliance may cause electric
shock. Never switch on a defective
appliance. Unplug the appliance from the
mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
mWarning – Risk of burns!
The appliance will become very hot on the
outside during the cleaning function. Never
touch the appliance door. Allow the appliance
to cool down. Keep children at a safe distance.

6
en Causes of damage
] Causes of damage
Causesofdamage Caution!
– Accessories, foil, greaseproof paper or ovenware
on the cooking compartment floor: Do not place
accessories on the cooking compartment floor. Do
not cover the cooking compartment floor with any
sort of foil or greaseproof paper. Do not place
ovenware on the cooking compartment floor. This
will cause heat to accumulate. The baking and
roasting times will no longer be correct and the
enamel will be damaged.
– Water in a hot cooking compartment: do not pour
water into the cooking compartment when it is hot.
This will cause steam. The temperature change can
cause damage to the enamel.
– Moist food: do not store moist food in the cooking
compartment when it is closed for prolonged
periods This will damage the enamel.
– Fruit juice: when baking particularly juicy fruit pies,
do not pack the baking tray too generously. Fruit
juice dripping from the baking tray leaves stains
that cannot be removed. If possible, use the deeper
universal pan.
– Cooling with the appliance door open: only allow
the cooking compartment to cool when it is closed.
Even if the appliance door is only open a little, front
panels of adjacent units could be damaged over
time.
– Very dirty door seal: If the door seal is very dirty, the
appliance door will no longer close properly when
the appliance is in use. The fronts of adjacent units
could be damaged.Always keep the door seal clean.
– Appliance door as a seat, shelf or worktop: Do not
sit on the appliance door, or place or hang anything
on it. Do not place any cookware or accessories on
the appliance door.
– Inserting accessories: depending on the appliance
model, accessories can scratch the door panel
when closing the appliance door. Always insert the
accessories into the cooking compartment as far as
they will go.
– Carrying the appliance: do not carry or hold the
appliance by the door handle. The door handle
cannot support the weight of the appliance and
could break.
7 Environmental protection
Envi ronmentalprotection The sections below list a number of energy-saving tips
and provide information on disposing of your appliance.
Saving energy
▯Use dark-coloured, black-coated or enamelled
baking tins. These absorb the heat particularly well.
▯Open the appliance door as little as possible during
operation.
▯If you are baking more than one cake, it is best to
bake them one after the other. The fact that the
oven is still warm will reduce the baking time for the
second cake. You can also place two loaf tins next
to each other.
▯In hot air mode, you can bake on more than one
level at a time.
▯If the cooking time is relatively long, you can switch
the appliance off 10 minutes before the cooking
time ends and use the residual heat to finish
cooking.
Environmentally-friendly disposal
Dispose of packaging in an environmentally-friendly
manner.
This appliance is labelled in accordance
with European Directive 2012/19/EU
concerning used electrical and electronic
appliances (waste electrical and electronic
equipment - WEEE). The guideline
determines the framework for the return and
recycling of used appliances as applicable
throughout the EU.

6
en Causes of damage
] Causes of damage
Causesofdamage Caution!
– Accessories, foil, greaseproof paper or ovenware
on the cooking compartment floor: Do not place
accessories on the cooking compartment floor. Do
not cover the cooking compartment floor with any
sort of foil or greaseproof paper. Do not place
ovenware on the cooking compartment floor. This
will cause heat to accumulate. The baking and
roasting times will no longer be correct and the
enamel will be damaged.
– Water in a hot cooking compartment: do not pour
water into the cooking compartment when it is hot.
This will cause steam. The temperature change can
cause damage to the enamel.
– Moist food: do not store moist food in the cooking
compartment when it is closed for prolonged
periods This will damage the enamel.
– Fruit juice: when baking particularly juicy fruit pies,
do not pack the baking tray too generously. Fruit
juice dripping from the baking tray leaves stains
that cannot be removed. If possible, use the deeper
universal pan.
– Cooling with the appliance door open: only allow
the cooking compartment to cool when it is closed.
Even if the appliance door is only open a little, front
panels of adjacent units could be damaged over
time.
– Very dirty door seal: If the door seal is very dirty, the
appliance door will no longer close properly when
the appliance is in use. The fronts of adjacent units
could be damaged.Always keep the door seal clean.
– Appliance door as a seat, shelf or worktop: Do not
sit on the appliance door, or place or hang anything
on it. Do not place any cookware or accessories on
the appliance door.
– Inserting accessories: depending on the appliance
model, accessories can scratch the door panel
when closing the appliance door. Always insert the
accessories into the cooking compartment as far as
they will go.
– Carrying the appliance: do not carry or hold the
appliance by the door handle. The door handle
cannot support the weight of the appliance and
could break.
7 Environmental protection
Envi ronmentalprotection The sections below list a number of energy-saving tips
and provide information on disposing of your appliance.
Saving energy
▯Use dark-coloured, black-coated or enamelled
baking tins. These absorb the heat particularly well.
▯Open the appliance door as little as possible during
operation.
▯If you are baking more than one cake, it is best to
bake them one after the other. The fact that the
oven is still warm will reduce the baking time for the
second cake. You can also place two loaf tins next
to each other.
▯In hot air mode, you can bake on more than one
level at a time.
▯If the cooking time is relatively long, you can switch
the appliance off 10 minutes before the cooking
time ends and use the residual heat to finish
cooking.
Environmentally-friendly disposal
Dispose of packaging in an environmentally-friendly
manner.
This appliance is labelled in accordance
with European Directive 2012/19/EU
concerning used electrical and electronic
appliances (waste electrical and electronic
equipment - WEEE). The guideline
determines the framework for the return and
recycling of used appliances as applicable
throughout the EU.
7
Familiarising yourself with your appliance en
* Familiarising yourself with your
appliance
Familiari singyourself withyour appliance Use this section to familiarise yourself with your new
appliance. The control panel and the individual
operating controls are explained. You will find
information on the cooking compartment and the
accessories.
Oven


1 Door seal
2 Grill heating element
3 Socket for additional heating element
(special accessory for baking stone)

8
en Familiarising yourself with your appliance
Display and operating controls
These instructions are valid for different versions of the
appliance. There may be minor differences depending
on the appliance model.
All versions of the appliance are operated in an identical
manner.
--------
Symbols
--------
Colours and display
Colours
The different colours are used to guide the user in the
relevant setting situations.
Appearance
Depending on the situation, the appearance of symbols,
values or the entire display changes.
1 Control panel These areas are touch sensitive.
Touch a symbol to select the cor-
responding function.
2 Display The display shows, for example,
current settings and options.
3 Rotary selector You can use the rotary selector to
set the temperature and to make
further settings.
4 Function selector The function selector is used to
select the type of heating, the
cleaning function or the basic set-
tings.
Symbol Function
IStart
ØStop
HPause/End
'Cancel
ŽDelete
™Confirm/save settings
CSelection arrow
(Call up additional information
’Rapid heating with status indicator
iCall up individual recipes
gRecord menu




%Edit settings
4Enter name
lDelete letters
0Child lock
MCall up timer menu
/Call up long-term timer
°Demo mode
ENetwork connection (Home Connect)
Orange Initial settings
Main functions
Blue Basic settings
Cleaning
White Values which can be set
Zoom The setting that you are changing
will appear larger on the display.
If you have set a time and it is about
to run out, it will appear larger on
the display just before it runs out
(e.g. 60seconds before the end, if
you have set the timer).
Pared-down
display
After a short while, the amount of
information shown on the display
will be reduced and only the most
important information will
remain.This function is pre-set and
can be changed in the basic
settings.


8
en Familiarising yourself with your appliance
Display and operating controls
These instructions are valid for different versions of the
appliance. There may be minor differences depending
on the appliance model.
All versions of the appliance are operated in an identical
manner.
--------
Symbols
--------
Colours and display
Colours
The different colours are used to guide the user in the
relevant setting situations.
Appearance
Depending on the situation, the appearance of symbols,
values or the entire display changes.
1 Control panel These areas are touch sensitive.
Touch a symbol to select the cor-
responding function.
2 Display The display shows, for example,
current settings and options.
3 Rotary selector You can use the rotary selector to
set the temperature and to make
further settings.
4 Function selector The function selector is used to
select the type of heating, the
cleaning function or the basic set-
tings.
Symbol Function
IStart
ØStop
HPause/End
'Cancel
ŽDelete
™Confirm/save settings
CSelection arrow
(Call up additional information
’Rapid heating with status indicator
iCall up individual recipes
gRecord menu




%Edit settings
4Enter name
lDelete letters
0Child lock
MCall up timer menu
/Call up long-term timer
°Demo mode
ENetwork connection (Home Connect)
Orange Initial settings
Main functions
Blue Basic settings
Cleaning
White Values which can be set
Zoom The setting that you are changing
will appear larger on the display.
If you have set a time and it is about
to run out, it will appear larger on
the display just before it runs out
(e.g. 60seconds before the end, if
you have set the timer).
Pared-down
display
After a short while, the amount of
information shown on the display
will be reduced and only the most
important information will
remain.This function is pre-set and
can be changed in the basic
settings.

9
Familiarising yourself with your appliance en
Standby
The appliance switches to standby mode if no function
is set or the childproof lock is activated.
The brightness of the control panel is dimmed in
standby mode.
Notes
– Different things can be displayed in standby mode.
The default setting is the GAGGENAU logo and the
time.
– The brightness of the display depends on the
vertical viewing angle.
– You can change the display and the brightness at
any time in the basic settings. ~ "Basic settings"
on page 23
Activating the appliance
To exit standby mode, you can either
▯Turn the function selector,
▯Touch a control panel,
▯Open or close the door.
You can now set the desired function. You can read
about how to set functions in the respective chapters.
Notes
– When "Standby screen = off" is selected in the
basic settings, you must turn the function selector
to exit standby mode.
– The appliance returns to the standby screen if you
have not made any settings for a long time after
activation.
– When the door is open, the interior lighting
switches off after a short time.
Additional information (and )
By touching the (symbol, you can call up additional
information. For example, information on the type of
heating set or on the current temperature of the cooking
compartment.
Note: During continuous operation after heating up,
slight deviations in temperature are normal.
The )symbol appears for important information and
indicates that an action is required. Important
information on safety and operating status is also
occasionally displayed automatically. These messages
disappear automatically after a few seconds or must be
confirmed with ™.
With Home Connect messages, the Home Connect
status additionally appears in the ). You will find more
information about this in the section entitled ~ "Home
Connect" on page 20.
Cooling fan
Your appliance has a cooling fan. The cooling fan
switches on during operation. Depending on the
appliance version, the hot air escapes above or under
the door.
After removing cooked food, keep the door closed until
the appliance cools down. The appliance door must not
be left ajar, as adjoining kitchen furniture may be
damaged. The cooling fan continues to run for a certain
time after operation and then switches off automatically.
Caution!
Do not cover the ventilation slots. Otherwise, the
appliance will overheat.

10
en Familiarising yourself with your appliance
Function selector positions
Accessories
Use only the accessories supplied with the product or
available from the after-sales service. They are specially
designed for your appliance. Ensure that you always
insert the accessories into the cooking compartment
the right way round.









Position Function/type of heating Temperature Application
0 "Off" position
žLight
2H
Hot air
50–300°C
Default temperature 170 °C
Hot air: For cakes, biscuits and bakes on more than
one level.
The fan in the back wall of the oven distributes the
heat evenly throughout the cooking compartment.
3I
Eco hot air*
50–300°C
Default temperature 170 °C
Energy-saving hot air mode for cakes, meat, bakes
and gratins. Residual heat is optimally used. Conveni-
ence functions remain switched off (e.g. the interior
lighting). The interior temperature can only be dis-
played while the appliance is heating up. Do not pre-
heat the oven.
Make sure that the cooking compartment is cold and
that there is nothing already in there when you place
the food inside. Then start the specified cooking time.
Always keep the appliance door closed when cook-
ing. This will prevent heat loss.
4N
Top + bottom heating
50–300°C
Default temperature 170 °C
For cakes in tins or on a baking tray, bakes, roasts.
5P
Top heating
50–300°C
Default temperature 170 °C
Targeted heat from above, for example grilling fruit
flan with meringue.
6L
Bottom heating
50–300°C
Default temperature 170 °C
For adding extra baking time (such as for moist fruit
flans), for boiling down, for dishes in a bain marie.
7K
Hot air + bottom heating
50–300°C
Default temperature 170 °C
Additional heat from below for moist cakes, such as
fruit flan.
8Z
Full surface grill + air recircu-
lation
50–300°C
Default temperature 220 °C
Even, all-round heating for meat, poultry and whole
fish.
9Q
Full surface grill
50–300°C
Default temperature 220 °C
For grilling flat pieces of meat, sausages or fillets of
fish. Grilling and browning.
10 T
Baking stone function
50–300°C
Default temperature 250 °C
Can only be used with the baking stone and heating
element – these are optional accessories.
Baking stone heated from below for crisp stone-baked
pizza, bread or bread rolls.
St
Basic settings
Your appliance can be adjusted to your requirements
in the basic settings.
œ
Catalytic cleaning
300 °C Cleaning aid
* Type of heating used to determine the energy efficiency class in accordance with EN 60350-1.

10
en Familiarising yourself with your appliance
Function selector positions
Accessories
Use only the accessories supplied with the product or
available from the after-sales service. They are specially
designed for your appliance. Ensure that you always
insert the accessories into the cooking compartment
the right way round.









Position Function/type of heating Temperature Application
0 "Off" position
žLight
2H
Hot air
50–300°C
Default temperature 170 °C
Hot air: For cakes, biscuits and bakes on more than
one level.
The fan in the back wall of the oven distributes the
heat evenly throughout the cooking compartment.
3I
Eco hot air*
50–300°C
Default temperature 170 °C
Energy-saving hot air mode for cakes, meat, bakes
and gratins. Residual heat is optimally used. Conveni-
ence functions remain switched off (e.g. the interior
lighting). The interior temperature can only be dis-
played while the appliance is heating up. Do not pre-
heat the oven.
Make sure that the cooking compartment is cold and
that there is nothing already in there when you place
the food inside. Then start the specified cooking time.
Always keep the appliance door closed when cook-
ing. This will prevent heat loss.
4N
Top + bottom heating
50–300°C
Default temperature 170 °C
For cakes in tins or on a baking tray, bakes, roasts.
5P
Top heating
50–300°C
Default temperature 170 °C
Targeted heat from above, for example grilling fruit
flan with meringue.
6L
Bottom heating
50–300°C
Default temperature 170 °C
For adding extra baking time (such as for moist fruit
flans), for boiling down, for dishes in a bain marie.
7K
Hot air + bottom heating
50–300°C
Default temperature 170 °C
Additional heat from below for moist cakes, such as
fruit flan.
8Z
Full surface grill + air recircu-
lation
50–300°C
Default temperature 220 °C
Even, all-round heating for meat, poultry and whole
fish.
9Q
Full surface grill
50–300°C
Default temperature 220 °C
For grilling flat pieces of meat, sausages or fillets of
fish. Grilling and browning.
10 T
Baking stone function
50–300°C
Default temperature 250 °C
Can only be used with the baking stone and heating
element – these are optional accessories.
Baking stone heated from below for crisp stone-baked
pizza, bread or bread rolls.
St
Basic settings
Your appliance can be adjusted to your requirements
in the basic settings.
œ
Catalytic cleaning
300 °C Cleaning aid
* Type of heating used to determine the energy efficiency class in accordance with EN 60350-1.
11
Familiarising yourself with your appliance en
Your appliance is equipped with the following
accessories: Special accessories
You can order the following special accessories from
your specialist dealer:
Only use the accessories as specified. The
manufacturer accepts no liability if these accessories
are used incorrectly.
Remove any accessories that are not required during
operation from the cooking compartment. Bush for the
additional heating element at the back of the cooking
compartment: Always leave the cover in during normal
operation without the additional heating element.
Baking tray, enamelled
Wire rack
Enamelled grill tray
BA 036102 Wire rack, chromium-plated, without
opening, with feet
BA 046115 Glass dish, 24 mm deep
BA 056115 Heating element for baking stone
(230 V)
BA 056130 Baking stone
Including baking stone support and
pizza paddle (order heating element
separately)
BA 216102 Telescopic extension rail
BA 226102 Grill tray, enamelled, 37 mm deep
BA 226112 Baking tray, enamelled, 24 mm deep
BS 020002 Pizza paddle, set of 2
00664048 Oven ceiling with special catalytic
enamelling, for retrofitting
00664248 Oven back wall with special catalytic
enamelling, for retrofitting

12
en Before using the appliance for the first time
K Before using the appliance for the
first time
Beforeusingtheapplianceforthef i rsttime In this section, you can find out what you must do
before using your appliance to prepare food for the first
time. First read the section entitled ~ "Important
safety information" on page 4.
The appliance must be fully installed and connected to
the mains.
After connecting the appliance to the power supply, the
"Initial settings "menu will be displayed. Now you can
now configure your new appliance for initial set-up.
Notes
– The "Initial settings" menu will appear only after the
appliance has been connected to a power supply
and switched on for the first time, or if the
appliance has not been connected to a power
supply for a number of days.
Once the appliance has been connected to a power
supply, the GAGGENAU logo will appear first for
approximately 30seconds. The "Initial settings"
menu will then appear automatically.
– You can change the settings at any time in the basic
settings. ~ "Basic settings" on page 23
Setting the language
The preset language appears in the display.
1Turn the rotary selector to select the required
display language.
2Confirm with ™.
Setting the time format
The two possible formats 24h and AM/PM appear in the
display. The default is the 24h format.
1Use the rotary selector to select the desired format.
2Confirm with ™.
Setting the clock
The time is shown in the display.
1Set the desired time using the rotary selector.
2Confirm with ™.
Setting the date format
The three possible formats D.M.Y, D/M/Y and M/D/Y
appear in the display. The default is the D.M.Y format.
1Use the rotary selector to select the desired format.
2Confirm with ™.
Setting the date
The preset date appears in the display. The day setting
is already active.
1Set the day using the rotary selector.
2Touch the Csymbol to switch to the month setting.
3Set the month using the rotary selector.
4Touch the Csymbol to switch to the year setting.
5Set the year using the rotary selector.
6Confirm with ™.
Setting the temperature unit
The two possible units °C and °F will appear on the
display. The default unit is °C.
1Use the rotary selector to select the unit you
require.
2Confirm with ™.
Ending initial set-up
"Initial set-up complete" will appear on the display.
Confirm with ™.
The appliance will switch to standby mode and the
standby display will appear. The appliance is now ready
to use.
Heating up the oven
Make sure that there is no leftover packaging in the
cooking compartment.
To eliminate the new-appliance smell, heat up the oven
with it empty and the door closed. One hour with hot
air Hat 200 °C is ideal for this.
Cleaning accessories
Before using the accessories for the first time, clean
them thoroughly using hot detergent solution and a soft
cloth.

12
en Before using the appliance for the first time
K Before using the appliance for the
first time
Beforeusingtheapplianceforthef i rsttime In this section, you can find out what you must do
before using your appliance to prepare food for the first
time. First read the section entitled ~ "Important
safety information" on page 4.
The appliance must be fully installed and connected to
the mains.
After connecting the appliance to the power supply, the
"Initial settings "menu will be displayed. Now you can
now configure your new appliance for initial set-up.
Notes
– The "Initial settings" menu will appear only after the
appliance has been connected to a power supply
and switched on for the first time, or if the
appliance has not been connected to a power
supply for a number of days.
Once the appliance has been connected to a power
supply, the GAGGENAU logo will appear first for
approximately 30seconds. The "Initial settings"
menu will then appear automatically.
– You can change the settings at any time in the basic
settings. ~ "Basic settings" on page 23
Setting the language
The preset language appears in the display.
1Turn the rotary selector to select the required
display language.
2Confirm with ™.
Setting the time format
The two possible formats 24h and AM/PM appear in the
display. The default is the 24h format.
1Use the rotary selector to select the desired format.
2Confirm with ™.
Setting the clock
The time is shown in the display.
1Set the desired time using the rotary selector.
2Confirm with ™.
Setting the date format
The three possible formats D.M.Y, D/M/Y and M/D/Y
appear in the display. The default is the D.M.Y format.
1Use the rotary selector to select the desired format.
2Confirm with ™.
Setting the date
The preset date appears in the display. The day setting
is already active.
1Set the day using the rotary selector.
2Touch the Csymbol to switch to the month setting.
3Set the month using the rotary selector.
4Touch the Csymbol to switch to the year setting.
5Set the year using the rotary selector.
6Confirm with ™.
Setting the temperature unit
The two possible units °C and °F will appear on the
display. The default unit is °C.
1Use the rotary selector to select the unit you
require.
2Confirm with ™.
Ending initial set-up
"Initial set-up complete" will appear on the display.
Confirm with ™.
The appliance will switch to standby mode and the
standby display will appear. The appliance is now ready
to use.
Heating up the oven
Make sure that there is no leftover packaging in the
cooking compartment.
To eliminate the new-appliance smell, heat up the oven
with it empty and the door closed. One hour with hot
air Hat 200 °C is ideal for this.
Cleaning accessories
Before using the accessories for the first time, clean
them thoroughly using hot detergent solution and a soft
cloth.
13
Operating the appliance en
1 Operating the appliance
Operatingtheappliance Cooking compartment
mWarning – Risk of scalding!!
The inside of the appliance door becomes very hot
during operation. Always open the appliance door as far
as it will go. Ensure that the appliance door does not
swing back. Avoid contact with the inside of the
appliance door.
The cooking compartment has four shelf positions. The
shelf positions are counted from the bottom up.
Caution!
– Do not place anything on the cooking compartment
floor. Do not cover it with aluminium foil. A build-up
of heat could damage the appliance.
– Do not slide any accessories between the shelf
positions, or they may tip.
Inserting accessories
The accessories have a locking function.The locking
function prevents the accessories from tilting when they
are pulled out.The accessories must be inserted into the
cooking compartment correctly for the tilt protection to
work properly.
When inserting the wire rack, make sure that
▯the lug ¨is pointing downwards
▯the safety bar ©on the wire rack is at the back and
on top.
Switching on
1Set the required heating mode using the function
selector. The chosen heating mode and the default
temperature are displayed.
2If you want to change the default temperature:
set the required temperature with the rotary
selector.
The preheating symbol ’appears on the display. The
bar continuously shows the preheating status. When the
set temperature is reached, a signal sounds and the
preheating symbol ’goes off.
Note: The oven interior lighting stays switched off at a
temperature setting below 70°C
Switching off:
Turn the function selector to 0.
Rapid heating
With the "Rapid heating" function, your appliance
reaches the temperature you require particularly quickly
in the "top heat", "bottom heat" and "top+ bottom heat"
types of heating.
To ensure an even cooking result, do not place your
food in the cooking compartment until "Rapid heating"
is complete and the heat-up symbol ’has gone out.
Note: The "Rapid heating" function is preconfigured in
the factory settings. You can select "Rapid heating" ’
or "Heat-up" “in the basic settings.~ "Basic
settings" on page 23
Safety shut-off
For your protection, the appliance is equipped with an
automatic safety shut-off. Any heating process is
switched off after 12 hours if the oven is not operated in
this time. A message appears in the display.
Exception:
The long-term timer has been programmed.
Set the function selector to 0, then the appliance can be
operated again as usual.





14
en Timer functions
O Timer functions
Timerfuncti ons You use the timer menu to make the following settings:
ŠShort-term timer
pStopwatch
6Cooking time (not in standby mode)
5Cooking time end (not in standby mode)
Calling up the timer menu
You can call up the timer menu from any mode. Only
from the basic settings, function selector is set to S, the
timer menu is not available.
Touch the M symbol.
The timer menu is displayed.
Timer
The timer runs independently of the other appliance
functions. You can enter a maximum of 90 minutes.
Setting the timer
1Call up timer menu.
The "Timer" Šfunction is displayed.
2Turn the rotary selector to set the required cooking
time.
3Start with I.
The timer menu closes and the time begins to count
down. The Šsymbol and the countdown appear in the
display.
A signal sounds once the time has elapsed. Touch the
™symbol to silence.
You can exit the timer menu at any time by pressing the
' symbol. This erases the settings.
To stop the timer:
Call up timer menu. Touch Cto select the "Timer" Š
function and touch the Hsymbol. To allow the timer to
continue counting down, touch the symbol I.
Switching off the timer early:
Call up timer menu. Touch Cto select the "Timer" Š
function and touch the Žsymbol.
Stopwatch
The stopwatch runs independently of the other
appliance functions.
The stopwatch counts from 0seconds up to 90 minutes.
It also has a pause function, which enables you to
temporarily stop the clock.
Starting the stopwatch
1Call up the timer menu.
2Touch Cto select the p"Stopwatch" function.
3Touch Ito start.
6KRUWWHUPWLPHU


6WRSZDWFK


14
en Timer functions
O Timer functions
Timerfuncti ons You use the timer menu to make the following settings:
ŠShort-term timer
pStopwatch
6Cooking time (not in standby mode)
5Cooking time end (not in standby mode)
Calling up the timer menu
You can call up the timer menu from any mode. Only
from the basic settings, function selector is set to S, the
timer menu is not available.
Touch the M symbol.
The timer menu is displayed.
Timer
The timer runs independently of the other appliance
functions. You can enter a maximum of 90 minutes.
Setting the timer
1Call up timer menu.
The "Timer" Šfunction is displayed.
2Turn the rotary selector to set the required cooking
time.
3Start with I.
The timer menu closes and the time begins to count
down. The Šsymbol and the countdown appear in the
display.
A signal sounds once the time has elapsed. Touch the
™symbol to silence.
You can exit the timer menu at any time by pressing the
' symbol. This erases the settings.
To stop the timer:
Call up timer menu. Touch Cto select the "Timer" Š
function and touch the Hsymbol. To allow the timer to
continue counting down, touch the symbol I.
Switching off the timer early:
Call up timer menu. Touch Cto select the "Timer" Š
function and touch the Žsymbol.
Stopwatch
The stopwatch runs independently of the other
appliance functions.
The stopwatch counts from 0seconds up to 90 minutes.
It also has a pause function, which enables you to
temporarily stop the clock.
Starting the stopwatch
1Call up the timer menu.
2Touch Cto select the p"Stopwatch" function.
3Touch Ito start.
6KRUWWHUPWLPHU


6WRSZDWFK

15
Timer functions en
The timer menu is closed and the timing begins. The p
symbol and the elapsed time are shown in the display.
Pausing and restarting the stopwatch
1Call up the timer menu.
2Touch Cto select the p"Stopwatch" function.
3Touch the Hsymbol.
The time stops. The symbol changes to IStart.
4Touch Ito start.
The time continues to run. When 90minutes is reached,
the display pulsates and signal sounds. The signal stops
when you touch the ™symbol. The psymbol on the
display goes out. The process has finished.
To switch off the stopwatch:
Call up the timer menu. Touch Cto select the p
"Stopwatch" function and touch the Žsymbol.
Cooking time
If you set a cooking time for your meal, the appliance
switches off heating automatically after the selected
time.
You can set a cooking time from 1 minute to 23 hours
59 minutes.
Setting a cooking time
You have set the heating mode and temperature and you
have placed your dish in the oven.
1Touch the Msymbol.
2Use Cto select the 6 "Cooking time" function.
3Set the desired cooking time using the rotary
selector.
4Press Ito start.
The appliance starts. The timer menu is closed. The
settings for temperature, heating mode, elapsing time
and cooking time end are shown in the display.
During the last minute of the cooking time the remaining
time is displayed in an enlarged format.
The appliance switches off after the cooking time has
elapsed. The 6symbol flashes and a signal sounds.
The signal stops when you touch the ™symbol, open
the appliance door, or switch the function selector to 0.
Changing the cooking time:
Call up the timer menu. Use Cto select the 6 "Cooking
time" function. Change the cooking time using the
rotary selector. Press Ito start.
Clearing the cooking time:
Call up the timer menu. Use Cto select the 6 "Cooking
time" function. Clear the cooking time with Ž. Return to
normal operation with '.
Cancelling the entire operation:
Set the function selector to 0.
Note: You can also change the heating mode and
temperature during the cooking time.

6WRSZDWFK

&RRNLQJWLPH

16
en Timer functions
End of cooking time
You can delay the cooking time end to a later time.
Example: it is 14:00. The dish requires a cooking time of
40minutes. You want it to be ready at 15:30.
Enter the cooking time and delay the cooking time end
until 15:30. The electronics system calculates the start
time. The appliance starts automatically at 14:50and
switches off at 15:30.
Bear in mind that food which spoils easily should not be
left in the cooking compartment for too long.
Delaying the cooking time end
You have set the heating mode, temperature and
cooking time.
1Touch the Msymbol.
2Use Cto select the 5"Cooking time end" function.
3Set the desired cooking time end using the rotary
selector.
4Press Ito start.
The appliance switches to standby. The heating mode,
temperature, cooking time and cooking time end appear
in the display. The appliance starts at the calculated
time and switches off automatically when the cooking
time has elapsed.
Note: If the 6symbol flashes: You have not set the
cooking time. Always set the cooking time first.
Once the cooking time has elapsed, the appliance
switches off. The 5symbol flashes and an audible
signal sounds. The signal stops early if you touch the ™
symbol, open the appliance door, or set the function
selector to 0.
To change the cooking time end:
Call up the timer menu. Use Cto select the 5"Cooking
time end" function. Set the desired cooking time end
using the rotary selector. Press Ito start.
To terminate the whole procedure:
Set the function selector to 0.
&RRNLQJWLPHHQG



16
en Timer functions
End of cooking time
You can delay the cooking time end to a later time.
Example: it is 14:00. The dish requires a cooking time of
40minutes. You want it to be ready at 15:30.
Enter the cooking time and delay the cooking time end
until 15:30. The electronics system calculates the start
time. The appliance starts automatically at 14:50and
switches off at 15:30.
Bear in mind that food which spoils easily should not be
left in the cooking compartment for too long.
Delaying the cooking time end
You have set the heating mode, temperature and
cooking time.
1Touch the Msymbol.
2Use Cto select the 5"Cooking time end" function.
3Set the desired cooking time end using the rotary
selector.
4Press Ito start.
The appliance switches to standby. The heating mode,
temperature, cooking time and cooking time end appear
in the display. The appliance starts at the calculated
time and switches off automatically when the cooking
time has elapsed.
Note: If the 6symbol flashes: You have not set the
cooking time. Always set the cooking time first.
Once the cooking time has elapsed, the appliance
switches off. The 5symbol flashes and an audible
signal sounds. The signal stops early if you touch the ™
symbol, open the appliance door, or set the function
selector to 0.
To change the cooking time end:
Call up the timer menu. Use Cto select the 5"Cooking
time end" function. Set the desired cooking time end
using the rotary selector. Press Ito start.
To terminate the whole procedure:
Set the function selector to 0.
&RRNLQJWLPHHQG


17
Long-term timer en
F Long-term timer
Long- termtimer With the appliance in hot air mode, this function keeps
the temperature between 50and 230°C.
You can keep food warm for up to 74hours without
having to switch the appliance on and off.
Bear in mind that food which spoils easily should not be
left in the oven for too long.
Note: To use the long-term timer, you will need to set it
to "available" in the basic settings. ~ "Basic settings"
on page 23
Setting the long-term timer
1Set the function selector to ž.
2Touch the /symbol.
The default value 24hrs at 85°C appears in the
display. Press Ito start
–or–
Change the cooking time, the cooking time end, the
switch-off date and the temperature.
3Changing the cooking time 6:
Touch the $symbol. Set the required cooking
time using the rotary selector.
4Changing the cooking time end 5:
Touch the Csymbol. Set the required cooking
time end using the rotary selector.
5Changing the switch-off date q:
Touch the Csymbol. Set the required switch-off
date with the rotary selector. Confirm with ™.
6Changing the temperature:
Set the required temperature with the rotary
selector.
7Press I to start.
The appliance starts. / and the temperature appear in
the display.
The oven and display lighting are switched off. The
control panel is locked; no key tone sounds when you
touch the touch keys.
Once the set time has elapsed, the appliance stops
heating. Turn the function selector to 0.
Switching off:
To end the process, turn the function selector to 0.
Ž Individual recipes
Individual recipes It is possible to save up to 50individual recipes. You
can record a recipe. These recipes can be given a name
so that they can be called up quickly and conveniently
when required.
Recording a recipe
It is possible to set up to 5phases consecutively while
recording at the same time.
1Turn the function selector to the required type of
heating.
The isymbol will be displayed.
2Touch the isymbol.
3Use the rotary selector to select a free memory
location.
4Touch the gsymbol.
5Use the rotary selector to set the required
temperature.
6The cooking time will be recorded.
7To record another phase:
Turn the function selector to the required type of
heating. Turn the rotary selector to set the desired
temperature. This will start a new phase.
8Once you have obtained the cooking result you
want for the dish, touch the & symbol to finish the
recipe.
9Enter a name for the recipe in "ABC". ~ "Entering
names" on page 18
Notes
– The appliance will not start recording a phase until
it has reached the set temperature.
– Each phase must last at least 1minute.
– During the first minute of a phase, you can change
the type of heating or the temperature.
/RQJWHUPWLPHU

18
en Individual recipes
Programming a recipe
You can programme and save up to 5preparation
phases.
1Turn the function selector to the required type of
heating. Use the rotary selector to set the required
temperature.
The isymbol will be displayed.
2Touch the isymbol.
3Use the rotary selector to select a free memory
location.
4Touch the %symbol.
5Enter a name for the recipe in "ABC". ~ "Entering
names" on page 18
6Use the Csymbol to select the first phase.
The initial type of heating and temperature are
displayed. You can change the type of heating and
the temperature using the rotary selectors.
7Use the Csymbol to select the time setting.
8Set the required cooking time using the rotary
selector.
9Use the Csymbol to select the next phase.
- or -
If preparation is complete, finish making entries.
10 Save with ™.
- or -
Cancel with 'and exit the menu.
Entering names
1Enter the name of the recipe in "ABC".
2Save with ™.
- or -
Cancel with 'and exit the menu.
Note: For entering a name, Latin characters, certain
special characters and numbers are available.
Starting recipes
1Set the function selector to any heating mode.
The isymbol is displayed.
2Touch the isymbol. Use the rotary selector to
select the required recipe.
3Press Ito start.
Operation starts. The cooking time starts counting
down in the display.
The settings for each phase are shown in the
display.
Notes
– The cooking time does not start counting down until
the appliance has reached the set temperature.
– You can use the rotary selector to change the
temperature while the recipe is in progress. This
does not change the saved recipe.
$B
Rotary selec-
tor
Select letters
A new word always begins with a capital let-
ter.
4Press briefly: moves the cursor right
Press and hold: shifts to umlauts and spe-
cial characters
Press twice: accepts the change
5Press briefly: moves the cursor right
Press and hold: shift to normal characters
Press twice: accepts the change
lDeletes letters

18
en Individual recipes
Programming a recipe
You can programme and save up to 5preparation
phases.
1Turn the function selector to the required type of
heating. Use the rotary selector to set the required
temperature.
The isymbol will be displayed.
2Touch the isymbol.
3Use the rotary selector to select a free memory
location.
4Touch the %symbol.
5Enter a name for the recipe in "ABC". ~ "Entering
names" on page 18
6Use the Csymbol to select the first phase.
The initial type of heating and temperature are
displayed. You can change the type of heating and
the temperature using the rotary selectors.
7Use the Csymbol to select the time setting.
8Set the required cooking time using the rotary
selector.
9Use the Csymbol to select the next phase.
- or -
If preparation is complete, finish making entries.
10 Save with ™.
- or -
Cancel with 'and exit the menu.
Entering names
1Enter the name of the recipe in "ABC".
2Save with ™.
- or -
Cancel with 'and exit the menu.
Note: For entering a name, Latin characters, certain
special characters and numbers are available.
Starting recipes
1Set the function selector to any heating mode.
The isymbol is displayed.
2Touch the isymbol. Use the rotary selector to
select the required recipe.
3Press Ito start.
Operation starts. The cooking time starts counting
down in the display.
The settings for each phase are shown in the
display.
Notes
– The cooking time does not start counting down until
the appliance has reached the set temperature.
– You can use the rotary selector to change the
temperature while the recipe is in progress. This
does not change the saved recipe.
$B
Rotary selec-
tor
Select letters
A new word always begins with a capital let-
ter.
4Press briefly: moves the cursor right
Press and hold: shifts to umlauts and spe-
cial characters
Press twice: accepts the change
5Press briefly: moves the cursor right
Press and hold: shift to normal characters
Press twice: accepts the change
lDeletes letters
19
Childproof lock en
Change recipe
You can change the settings of a recorded or
programmed recipe.
1Turn the function selector to the any type of heating.
The isymbol is displayed.
2Touch the isymbol.
3Use the rotary selector to select the desired recipe.
4Touch the %symbol.
5Use the Csymbol to select the desired phase.
The programmed type of heating, temperature and
cooking time are displayed. You can use the rotary
selector or function selector to change the settings.
6Save with ™.
- or -
Cancel with 'and exit the menu.
Deleting recipes
1Set the function selector to any type of heating.
The isymbol is displayed.
2Touch the isymbol.
3Use the rotary selector to select the desired recipe.
4Delete the recipe with Ž.
5Confirm with ™.
A Childproof lock
Childproof lock The appliance has a childproof lock to prevent children
operating it accidentally.
Notes
– To use the childproof lock, you will need to set it to
"available" in the basic settings. ~ "Basic settings"
on page 23
– If there is a power cut after the childproof lock has
been activated, the childproof lock may be
deactivated when the power comes back on.
Activate the child lock
Prerequisite:
The function selector is set to 0.
Touch and hold the 0symbol for at least 6 seconds.
The child lock is activated. The standby screen appears.
The 0symbol is shown at the top of the display.
Deactivating the child lock
Prerequisite:
The function selector is set to 0.
Touch and hold the 1symbol for at least 6 seconds.
The child lock is deactivated. You can set the appliance
as usual.

20
en Home Connect
o Home Connect
HomeConnect This appliance can be networked and controlled
remotely using a mobile device. The Home Connect app
offers extra functions that complement the networked
appliance perfectly. If the appliance is not connected to
your home network, it can be operated as usual via the
display.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country. You can find more information on this at
www.home-connect.com.
Notes
– Ensure that you follow the safety instructions in this
instruction manual and that you comply with these
even when you are away from home and are
operating the appliance via the Home Connect app.
You must also follow the instructions in the Home
Connect app.
– Operating the appliance directly from the appliance
always takes priority. It is not possible to operate
the appliance using the Home Connect app during
this time.
– Refer to the Home Connect documents supplied for
more information.
Setting up
To configure settings via Home Connect, you will need
to have installed the Home Connect app on a mobile
device.
Your appliance will also need to be connected to your
home network and to the Home Connect app. You can
choose between the following connection types:
▯Connection via LAN cable: The appliance is
connected to the home network automatically
following confirmation on the appliance.
▯Connection via WLAN: Establish the connection to
your home network and then the connection to the
Home Connect app.
Note: The app will guide you through the entire
registration process. In case of doubt, follow the
instructions in the app.
Installing the app
Install the Home Connect app on your mobile device
(e.g. tablet PC or smartphone).
1On your mobile device, go to the App Store (Apple
devices) or the Google Play Store (Android
devices).
2Enter the search term "Home Connect".
3Select the Home Connect app and install it on your
mobile device.
4Launch the app and set up Home Connect access.
The app will guide you through the registration
process.
Connecting the appliance to your home network
(LAN)
The appliance must be connected to your home network
using a LAN cable.
The network connection will be established
automatically when the appliance is connected to the
mains electricity supply for the first time and put into
operation.
Connecting the appliance to your home network
(WLAN with WPS)
Requirements:
▯Your router must have a WPS button. You will find
information about this in the manual for your router.
▯You need to be able to access your router.
1In the basic settings, select ¯"Home Connect".
2Touch the %symbol.
3Turn the rotary selector to "WLAN".
4Touch the ™symbol to confirm.
A message about the WPS function will appear.
5Touch the ™symbol to continue.
6Turn the rotary selector to "Automatic (WPS)".
7Touch the ™symbol to start the connection
process.
8Press the WPS button on the router within the next
2 minutes.
If the display shows "Network connection successful",
the connection process is complete. Follow the
instructions in the app.
Connecting the appliance to your home network
(WLAN without WPS)
1In the basic settings, select ¯"Home Connect".
2Touch the %symbol.
3Turn the rotary selector to "WLAN".
4Touch the ™symbol to confirm.
A message about the WPS function will appear.
5Touch the ™symbol to continue.
6Turn the rotary selector to "Manual".
7Touch the ™symbol to start the connection
process.
The appliance will set up its own "Home Connect"
WLAN network to which the tablet or smartphone
must be connected.
8Follow the instructions in the app.