GAI-Tronics 10401-201 User manual

Pub. 42004-212A
GAI-Tronics Corporation 400 East Wyomissing Avenue, Mohnton, PA 19540 USA
610-777-1374 n800-492-1212 nFax: 610-775-6540
GAI-TRONICS CORPORATION
Model 10401-201
Headset
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information which is confidential and proprietary to GAI-Tronics. GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The GAI-Tronics Model 10401-201 Headset provides hands-free communication with Page/Party™
systems. The 30-foot extension cable provides the users with mobility when connected to a Page/Party™
station. The cable is equipped with a push-to-page switch on the belt clip so users can access the page
line up to 30 feet away from a Page/Party™ station.
The GAI-Tronics headset provides a noise reduction rating of 23 dB, making it ideal for use where
hearing protection is required. Please refer to the attached Environmental Protection Agency (EPA) Use
and Care Sheet for information on maintaining the headset’s noise reduction rating (NRR). The
gooseneck (flexboom) microphone is fully adjustable but remains stationary once it is in place. In
addition, the gel-filled ear cups and adjustable black cloth head strap maximize comfort and keep the
headset securely in place. These factors allow the use of the headset in areas with up to 110 dB SPL
ambient noise, improving safety for employees working in these areas.
The headset is adaptable for use with or without hard hats. An employee working in different areas with
different requirements, can alternate the use of the same headset, requiring a reduced investment. The
headset is equipped with a clip to prevent the coil cord from dangling when it is not connected to the
extension cable.
Operation
To operate, the GAI-Tronics 10401-201 Headset must be connected to a Page/Party™ station using a
GAI-Tronics Model 10416-103 Extension Cable.
The Page/Party™ station handset will become disabled after the connection of the headset; paging may
only be initiated from the headset. To page from a GAI-Tronics headset, press the push-to-page switch
located on the extension cable belt clip.

Pub. 42004-212A
Page: 2of 3
\\s_acct\gtcproddocs\standard ioms - current release\instr. manuals (42004)\42004-212a.doc
5/98
Note: The GAI-Tronics Model 10401-201 Headset is not directly compatible with older GAI-Tronics
extension cables Models 10416-001 and 10416-003. These extension cables require installation of the
Model 12590-001 Extension Cable Connector Upgrade Kit to be compatible with the Model 10401-201
Headset. In addition, older GAI-Tronics headsets, Models 10401-101 and 10402-101, require installation
of the Model 12590-002 to be compatible with the Model 10416-103 extension cable. For ease of
reference, see the Headset and Extension Cable Replacements table.
HEADSET AND EXTENSION CABLE REPLACEMENTS
Old Model Number New Model Number Upgrade Kit for Compatibility
10401-101 Headset 10401-201 Headset 12590-002 Headset Connector
Upgrade
10402-101 Headset (for use with
a hard hat) 10401-201 Headset 12590-002 Headset Connector
Upgrade
10416-003 Extension Cable (with
a 6-pin connector) 10416-103 Extension Cable 12590-001 Extension Cable
Connector Upgrade
*10416-002 Extension Cable
(with a 4-pin connector) 10416-102 Extension Cable 12590-001 Extension Cable
Connector Upgrade
*This extension cable is used only with GAI-Tronics Model 600 series Page/Party™ systems and
special equipment.
Specifications
Noise Reduction Rating ........................................................................................................................23 dB
Microphone ....................................................................Gooseneck (flexboom); dynamic, noise-canceling,
Receiver..................................................................................................... Hearing aid compatible; dynamic
Configuration ...........................................................................Adaptable for use with or without a hard hat
Cable...............................................................................................Shielded, 5-foot (1.5m) extended length;
4-pin connector; attached belt clip
Ear Cups.......................................................................................................................................... Gel filled
Temperature Range (operating and storage)........................................... -22°F to +158°F (-30°C to +70°C)
Headset Weight ...................................................................................................................... 1.1 lbs (.51 kg)
Shipping Weight................................................................................................................. 2.25 lbs (1.03 kg)

Pub. 42004-212A
Page: 3of 3
\\s_acct\gtcproddocs\standard ioms - current release\instr. manuals (42004)\42004-212a.doc
5/98
REPLACEMENT PARTS
Part Number Description Reference Designator
12610-006 Spring Assembly 1
12610-005 Support Assembly 3
12610-004 Overhead Cord Assy Kit 5
12610-003 Nut and Washer Kit 6
12610-002 Communications Cord Assy Kit 7
12610-015* Boom Attachment Kit 8
12610-007* Flexboom Assembly 9
12610-008 Microphone Plug Cord 10
13501-001 Microphone 11
12610-009 Microphone Muff 12
13205-006 Receiver 14
12610-010 Screws (10 pack) 15
12610-011 Filter 18
12610-012 Ear Cup, Liquid or Gel Filled (pair) 19
12610-013 Ear Cup, Comfort Cover 20
12610-014 Clothing Clip 21
21503-002 Connector, Electrical 22
* If item 8 or item 9 require replacement, both pieces must be purchased to make the repair.
Table of contents
Other GAI-Tronics Headset manuals