Gaither GT 6033 User manual
1// GAITHERTOOL.COM
INSTRUCTIONS FOR
GT 6033
2
GAITHER
GT 6033
Thank you for purchasing a Gaither Tools product. Manufactured to a high standard this product will, if used according to these
instructions and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH
CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP
INSTRUCTIONS SAFE FOR FUTURE USE.
MORE INFO AND INSTRUCTION VIDEOS VISIT GAITHERTOOL.COM
WARNINGS
4
777
4 4
2 3
// GAITHERTOOL.COM
GAITHER
GT 6033
Dimensions
4
GAITHER
GT 6033
Assembly
8-12bar/120-175psi
8-12bar/120-175psi
8-12bar/120-175psi
8-12bar/120-175psi
4 5
// GAITHERTOOL.COM
GAITHER
GT 6033
Usage
8-12bar/120-175psi
8-12bar/120-175psi
8-12bar/120-175psi
8-12bar/120-175psi
6
GAITHER
GT 6033
Spare parts main
GT3031
ART NR DESCRIPTION ART NR DESCRIPTION
J001 CYLINDER ASSY J013PROTECTION COVER
J002 PUMP ASSY J014AXLE
J005TIE IN J015WHEEL SETS
J006HANDLE SETS J016 SCREW
J007HOUSING ASSY J017SCREW
J008SWITCH ASSY J018SCREW
J010 HANDLE ASSY J019SCREW
J011ADAPTOR SETS J020 PROTECTION COVER
J012TIE IN J021 OIL HOSE
6 7
// GAITHERTOOL.COM
GAITHER
GT 6033
Spare parts pump
GT3031
7// GAITHERTOOL.COM
GAITHER
GT 6033
Spare parts pump
ART NR DESCRIPTION ART NR DESCRIPTION ART NR DESCRIPTION
LHJ01 SCREW LHJ24 AIR CYLINDER LHJ44 AIR INLET VALVE
LHJ02 TIE IN LHJ25 SPRING LHJ47 SPRING
LHJ03 OIL DRAIN BOLT LHJ26 PLUNGER ROD LHJ50 SAFETY VALVE
LHJ04 O RING LHJ28 O RING LHJ51 OIL PUMP
LHJ05 SPRING LHJ29 PISTON LHJ52 GUIDER SLEEVE
LHJ06 TIE IN LHJ30 OA LHJ53 O RING
LHJ07 FITTER LHJ31 Z8 SEAL LHJ54 LOCKING RING
LHJ09 SCREW LHJ32 PISTON LHJ55 O RING
LHJ10 SILENCER LHJ33 RUBBER CAP LHJ56 LOCKING RING
LHJ11 CLAMP LHJ34 O RING LHJ57 CHECK VALVE
LHJ12 STEEL BALL LHJ35 SCREW LHJ61 SPRING
LHJ13 SPRING LHJ36 RUBBEL BALL LHJ62 OIL DRAIN BOLT
LHJ15 STEEL BALL LHJ37 SPRING LHJ63 OIL DRAIN PISTON
LHJ16 SPRING LHJ38 TIE IN LHJ64 O-RING
LHJ18 STEEL BALL LHJ39 SCREW LHJ65 OIL DRAIN COVER
LHJ19 SCREW NUT LHJ40 TIE IN LHJ66 O RING
LHJ20 SPRING LHJ41 PISTON JP001 CHECK VALVE ASSY
LHJ22 B3 SEAL LHJ42 O RING JP002 OIL PUMP ASSY
LHJ23 LOCKING RING LHJ43 SPRING JP003 AIR INLET VALVE ASSY
8
GT3031
GAITHER
GT 6033
Spare parts Cylinder
ASSY NO. ART NR DESCRIPTION
J3A
J301
J302
J303
J304
J305
BASE & SLEEVE ASSEMBLY
J321
J323
J324
J306
J307
J308
J309
J3B
J310
INNER SLEEVE ASSY
J316 LOCKING RING
J311
J312
J3C J313
J314
J315
J318
J319
J320
J317
J3D
J301/J302/
J304/J305/
J306/J307/
J309/J310/
J311/J312/
J314/J315/
J318/J319/
J320
SADDLE
PISTON ASSEMBLY
INNER SLEEVE ASSY
J3ESEAL KIT
8 9
// GAITHERTOOL.COM
10
F: DÉCLARATION DE CONFORMITÉ
Nous: Gaither Europe BV
Addresse: Rechtzaad 6
4703 RC Roosendaal The Netherlands déclarons sous
notre seuoe responsabilité que les produits auxquels se réfère cette
déclaration sont conformes aux dispositions des Directives:
2006/42/EC, EN 1494:2001+A1:2008
NL:
Wij:
Adres:
VERKLARING VAN OVEREENKOMST
Gaither Europe BV
Rechtzaad 6
4703 RC Roosendaal The Netherlands
verklaren geheel onder eigen verantwoordelijkheid dat de volgende
produkten, waarop deze verklaring betrekking heeft, in
overeenstemming zijn met de bepalingen van Richtlijn:
2006/42/EC, EN 1494:2001+A1:2008
I: DICHIARAZIONE DI CONFORMITÀ
Noi: Gaither Europe BV
Indirizzo: Rechtzaad 6
4703 RC Roosendaal The Netherlands
dichiariamo sotto la nostra esclusiva responsabilità che i prodotti ai quali
questa dichiarazione si riferisce sono conformi a quanto previsto dalle
direttive: 2006/42/EC, EN 1494:2001+A1:2008
E: DECLARACIÒN DE CONFORMIDAD
Nosotros: Gaither Europe BV
Direcciòn: Rechtzaad 6
4703 RC Roosendaal The Netherlands
declaramos bajo nuestra exclusiva responsabilidad la conformidad de
los productos a los que refiere esta declaraciòn, con las dispo-siciones
de Directiva: 2006/42/EC, EN 1494:2001+A1:2008
P: DECLARAÇÁO DE CONFORMIDADE
Nós: Gaither Europe BV
Endereço: Rechtzaad 6
4703 RC Roosendaal The Netherlands
declaramos, sob nossa única responsabilidade, que os seguintes
produtos, incluídos nesta declaração estão em conformidade com
o disposto na Directiva: 2006/42/EC, EN 1494:2001+A1:2008
SE:
Vi:
Adress:
FÖRSÄKRAN OM ÖVERESSTÄMMELSE
Gaither Europe BV
Rechtzaad 6
4703 RC Roosendaal The Netherlands
försäkrar under eget ansvar att följande produkter som omfattas av
denna försäkran är I överensstämmelse med villkoren i direktiv:
2006/42/EC, EN 1494:2001+A1:2008
N:
Vi:
Adresse:
ERKLÆRING OM OVERENSSTEMMELSE
Gaither Europe BV
Rechtzaad 6
4703 RC Roosendaal The Netherlands
erklærer på eget ansvar, at følgende produkter som dekkes av denne
erklæringen, er i overensstemmelse med bestemmelsene i Direktiv:
2006/42/EC, EN 1494:2001+A1:2008
DK:
Vi:
Adresse:
ÖVERENSSTEMMELSESERKLÆRING
Gaither Europe BV
Rechtzaad 6
4703 RC Roosendaal The Netherlands
erklærer på eget ansvar et følgende produkter som er omfattet af
denne erklæring, er i overensstemmelse med bestemmelserne i
Direktiv: 2006/42/EC, EN 1494:2001+A1:2008
Fin:
Me:
Osoite:
ÖVERENSSTEMMELSESERKLÆRING
Gaither Europe BV
Rechtzaad 6
4703 RC Roosendaal The Netherlands
vakuutamme yksinomaan omalia vastuullamme, että seuraavat
tuotteet, joihin tämä vakuutus liittyy, ovat seuraavien direktiivien
vaatimusten mukaisia: 2006/42/EC, EN 1494:2001+A1:2008
GB:
We:
Address:
DECLARATION OF CONFORMITY Gaither
Europe BV
Rechtzaad 6
4703 RC Roosendaal The Netherlands
declare under our sole responsibility that the following products to
which this declaration relates conform with the provisions of Directives:
2006/42/EC, EN 1494:2001+A1:2008
D: KONFORMITÄTSERKLÄRUNG
Wir: Gaither Europe BV
Anschrift: Rechtzaad 6
4703 RC Roosendaal The Netherlands
erklären auf eigene Verantwortung, daß folgende Produkte, auf die sich
diese Erklärung bezieht, mit den Bedingungen der Direktiven: 2006/42/
EC, EN 1494:2001+A1:2008
Typ,tyyppi,type,type,type,Typ,type,tipo,type,tipo,tipo: GT 6033
Ralph Dubbeldam
Managing Director
Gaither Europe BV, 2016-06-15
Roosendaal The Netherlands
10 11
// GAITHERTOOL.COM
GAITHER
NOTES
CHANGING THE WAY THE WORLD SERVICES YOUR TIRES
CONTACT US
gaithertool.com
GAITHER EUROPE BV
THE NETHERLANDS
Rechtzaad 6
4703 RC Roosendaal (Holland)
t+31 (0) 165 554475
f+31 (0) 165 391819
eevd@gaithereurope.com
ABOUT US
Gaither Tool Company, Inc. founded in 1988, is an international organization committed to serving the tire and trucking industry. It invents and
manufactures convenient tools and systems needed to service and maintain tires and wheel assemblies.
Gaither Tool Company, Inc. continually invests in research and development to bring to its customers the most effective tools in the business.
It strives to improve efficiency and reduce costs for customers all over the world working in truck maintenance shops as well as on-the-road
tire service providers. Bandag, Euromaster/Michelin, Bridgestone’s First Stop, The United States Armed Forces... just to name a few.
Gaither supplies products to customers in over 100 countries, selling through exclusive and nonexclusive distributors. Gaither Tool Company,
Inc. is headquartered in Jacksonville, Illinois, U.S.A. In 1997 it opened a branch office located in Roosendaal, Holland to better serve the
European market. In 1999 that office was incorporated in Holland and Gaither Europe BV was started. Gaither’s manufacturing plant and
warehousing for International distribution is located in Taichung, Taiwan.
With a strategically placed location in both The United States and The Netherlands, we are able to serve the global industry
Table of contents
