1. Remove the machine
from the box and place
on a flat surface.
2. Adjust the creasing
position and the
indention / depth
according to your
needs, the upper indent
should align with the
centre of the crease.
3. Adjust paper position
accordingly.
4. Insert paper/card and
adjust the creasing
pressure as well as
feeding pressure on the
paper feeding wheels
Creasing wheel 4
Feeding wheel 2
Perforating wheel 1 optional)
Dimension 510x325x172mm
N.G 9.9kg
POWER 220V-240V 50HZ-60HZ
Specification
5. Caution when using the machine,
always make sure the safety lid is
closed and always make sure to switch
off the machine when not in use or
when changing or moving the blades.
