Galvani H1 User manual

H1 PRO HAND WARM ER
User’s Manual
galvanitech.com Made in the USA

32
Johnny Forzani, a former receiver in
the Canadian Football League, knew
only too well how hard it was to grip
a frozen football with numb hands,
so he decided to do something about
it. Teaming up with childhood friend
and former NCAA Division I golfer
Jesse Galvon, Galvani Technical
Apparel was born.
“Galvani” is the combination of their
two last names, as well as the name of
the 18th century Italian scientist who
pioneered batteries – this was a brand
that was destined to be. After scouring
the planet for the most innovative
batteries, heating technology, and
advanced technical fabrics, the Galvani
H1 hand warmer is now available.
“We’re really proud of this product, and
we’re stoked that athletes like Lydia Ko,
Patrick Reed, and CFL quarterback
Bo Levi Mitchell are already using the
H1 when they play in cold conditions.
The H1 is just the beginning. We have
more innovative heated products in
the pipeline.”
Congratulations, you now own a piece of the world’s
finest heated apparel. Within these pages, you’ll learn
more about what makes Galvani the best investment
you can make in your personal comfort, as well as
how to take care of your H1 so you can get the
most out of it.
WHAT’S IN THE BOX
ABattery Charger
BBattery
CH1
WHAT’S IN THE BOOK
Page
3 Introduction
4 Technology and Materials
6 H1 Technical View
8 System Functionality
9 Battery and Connection
10 Care Instructions /
Safety Information
11 Troubleshooting
A
B
C
Jesse Galvon Johnny Forzani

54
PROPRIETARY TRI-ZONE HEATING SYSTEM
Heated surfaces in the front, back and in the grab bar surround cold
hands for efficient heat transfer.
LITHIUM POLYMER HIGH-PERFORMANCE BATTERIES
Rechargeable batteries provide up to five (5) hours of
sustained use in the most extreme conditions.
PROPRIETARY INSULATION TECHNOLOGY
When you’re ready to use your hands, seal in the heat with
a press of the cuffs.
HYDROPHOBIC FABRIC
Weather resistant, moisture-wicking fabric technology keeps
sweat and odor out and keeps dry heat in.
PREMIUM CONSTRUCTION
Made from 100% high-grade performance fabric from
Canada and the USA.
ADVANCED FABRIC TECHNOLOGY
Layered system traps heat in the unit and uses less power to maintain
peak performance.
PATENT-PENDING INTERNAL GRAB BAR
Heated internal grab bar provides direct and instantaneous warmth
through integrated heated elements.
LED THERMADJUST SETTING SYSTEM
Easily change between four (4) heat levels by pressing a button.
TECHNOLOGY AND MATERIALS

76

98
SYSTEM FUNCTIONALITY BATTERY AND CONNECTION
1. Place charged batteries into your H1’s
zipped battery case as seen in figure 1.
1. Hold the LED Thermadjust button
for five (5) seconds until the
glowing LED fades away.
2. Hold the LED Thermadjust button for
five (5) seconds until it lights up.
To turn on:
To turn off:
The H1 has four temperature settings:
POWER INSTRUCTIONS CHARGING THE BATTERY PACK
TEMPERATURE SETTINGS
MAXIMUM HIGH MEDIUM LOW
1. After turning your H1 on, press the
LED Thermadjust button until the light
changes color (figure 2). This will select
the next lowest level.
2. When the LED indicator on the
Thermadjust button reaches blue,
pressing it again will revert it back to
red, the maximum heat setting.
5. Disconnect the battery from the
charger when the charger’s indicator
light changes from red to green.
•If the charger indicator light is red,
the battery is charging. A full charge
typically takes under five (5) hours.
•If the charger indicator light is green,
the battery has fully charged.
• Do not leave the battery charging for
more than six (6) hours.
•Disconnect from the wall outlet if either
the charger or the battery overheats.
1. Disconnect the battery pack from
inside the zipped case.
2. Remove the battery pack from your H1.
3. Plug the charger into a wall outlet.
4. Connect the battery pack to the charger
adapter as shown in figure 3.
IMPORTANT: When you first get your
H1, charge it for six (6) hours.
•Do not expose the charger to humidity
or moisture.
•Universal Power Input: 100-240VAC /
47-63Hz
•Maximum Charging Voltage: 12.6V
•Maximum Charging Current: 1A
•The batteries are Lithium Polymer.
Follow your local guidelines regarding
proper handling and disposal of
unwanted batteries. When in doubt,
use a battery-recycling program.
fig. 1
fig. 3
fig. 2

CARE INSTRUCTIONS SAFETY INFORMATION TROUBLESHOOTING
Store your H1 and its batteries in a
cool, dry place. Do not store your H1 or
its batteries anywhere colder than -4°F
(-20°C) or hotter than 158°F (70°C).
Turn on your H1 five (5) minutes
prior to wearing for immediate
warmth when using.
Try to limit the inside of your H1’s
exposure to moisture.
Open your H1’s cuffs and hang it
vertically in a well-ventilated area
to keep the inside fresh.
Do not leave your H1 unsupervised
when powered on.
Parental supervision of children
younger than twelve (12) years of
age is recommended.
Disconnect the battery when not in use.
If the battery overheats, power your
H1 off, wait until you are able to safely
touch the battery pack, and disconnect
the batteries.
Do not use your H1 if the battery has been
punctured or otherwise damaged.
If your H1 or its batteries are damaged, do
not attempt to repair it yourself.
Galvani products are designed and manufactured to
the highest standards. If you encounter a problem,
check here for potential solutions. To see if your H1 is
eligible for repair or replacement, please consult the
Warranty information included with your unit.
The charger is blinking:
The charger is defective. Disconnect the
batteries and appropriately dispose of
the charger.
When powering your H1 on,
the LED blinks green then turns off:
The temperature sensing system is
either damaged or defective.
Your H1 will not change to the
next heat setting:
Inspect the LED Thermadjust button for
damage, something may be wrong with
the electrical system.
The heat in your H1 is uneven:
Inspect the H1 for damage due to
puncturing, stretching, and/or crushing.
When powering your H1 on, neither
the LED or the H1 turns on:
The battery probably isn’t charged.
Charge the battery and try again. If
the LED and H1 still won’t turn on,
the battery may be damaged. Inspect
it, and dispose of it appropriately if
damage is found.
If your issue is not listed here:
Contact Galvani customer service.
1110

@galvani_techGalvani Tech Apparel @galvani_tech
CANADA HEAD OFFICE:
2540 Kensington Road NW
Calgary, AB T2N 3S3
[phone]
US HEAD OFFICE:
2211 Elliott Ave, Suite 200
Seattle, WA 98121
[phone]
DESIGN LAB:
21 Dry Dock Ave, Floor 7
Boston, MA 02210
#DEFEATTHECOLD