Game ready 590810 User manual

Warning: Always consult with your physician before using the Game Ready
System for an injury.
Caution: Do not place directly against open wounds, sores, rashes, infections,
or stitches. First place a sterile dressing on the wound and then apply the Wrap.
If pressure is uncomfortable, pause unit, and restart with lower pressure. Do not
store in closed plastic bag after use, as this will promote mold growth. Do not
puncture Wrap, doing so will void Game Ready warranty.
Care: Single-Use Coverlets are intended to be used once then discarded.
Sleeve care; gently remove Heat Exchanger from the Sleeve. Hand or machine
wash the sleeve in warm water and mild detergent, or antibacterial soap. Hang
to dry. Hand wash the Heat Exchanger, do not machine wash. See Control Unit
User's Manual for more detail. Cold sterilization only.
Warranty Information:
Sleeve and Coverlet: In case of manufacturer defect, Sleeve or Coverlet may
be returned within 7 days of purchase.
Heat Exchanger: 1 year from date of purchase. See warranty card included
with Heat Exchanger.
CoolSystems, Inc.
1201 Marina Village Pkwy, Suite 200.
Alameda, CA 94501
1-888-GAMEREADY
Game Ready 2008
Hand Single-Use Coverlet: #510815
Hand Sleeve: #510810
*Hand Heat Exchanger: #520810
*Fits both sleeve types
Hand Wrap - Sleeve #590810
Hand Wrap - Coverlet #590815
1
1
3
3
3
2
2
®
Hand Wrap Application
702911 Rev B
Hand Wrap - Sleeve #590810
Hand Wrap - Coverlet #590815
Position the Hand Wrap with
disposable Coverlet on your hand with
the Logo side facing out. (Blue side
against your skin)
Next, wrap a bandage around both the
Hand Wrap and your hand, securing
the Hand Wrap to your hand. (Do not
overtighten)
Next, connect the hose fitting to the
Heat Exchanger fitting. (Fitting and
connector fit together in one way only)
Listen for an audible click for a secure
fit.
Next, connect the hose fitting to the
Heat Exchanger fitting. (Fitting and
connector fit together in one way only)
Listen for an audible click for a secure
fit.
Detach the securing straps on one side
of sleeve. Position the Hand Wrap with
Sleeve on your hand with the Logo side
facing out. (Blue side against your skin)
Next, stretch the securing straps
around both the Hand Wrap and your
hand and secure to your hand by
applying the hook near the Logo. (Do
not overtighten)
This versitile wrap can be positioned
on your hand in many positions to
deliver cold and compression therapy.
(Illustration shows Hand Wrap folded
over the outside ridge portion of hand)
Note: When positioning the Hand
Wrap over any area of your hand,
ensure to keep the Heat Exchanger
fitting accessible to connect the hose.
Note: You may position the Hand Wrap
in many different positions on your
hand, however be sure NOT to kink,
twist or distort the Heat Exchanger as
this may restrict water and air flow.
Listen
for
Click
Listen
for
Click
Fold
Around
Hand
(Coverlet)
(Sleeve)
®

Hand Wrap - Heat Exchanger Removal
Hand Wrap - Coverlet
1 Disconnect the Connector Hose from the Wrap
2 Gently pull out the Heat Exchanger
Hand Wrap - Sleeve
1 Disconnect the Connector Hose from the Wrap
2 Gently pull out the Heat Exchanger through the opening, while pulling
the Heat Exchanger fitting back through the neck opening.
Fig. 1 Place Hand Single-Use Coverlet on a flat surface with the logo side
down. Insert Heat Exchanger into the Coverlet with blue side up through
the elastic neck opening. (Blue side of Heat Exchanger should match
blue side of Coverlet and Sleeve)
Fig. 3 Make sure the Heat Exchanger is flat inside the Sleeve with no folds or
creases. After assembly, lay the blue side up, make sure the wrap is flat
and smooth.
Fig. 2 Place Hand Sleeve on a flat surface with logo side up. Insert Heat
Exchanger into the Sleeve through neck of sleeve with the black side
facing up. (Blue side of Heat Exchanger should match blue side of
Sleeve) Feed the connector fitting through the neck opening making
sure Heat Exchanger lays flat inside sleeve.
Hand Wrap - Sleeve #590810
Hand Wrap - Coverlet #590815
Hand Wrap - Heat Exchanger Insertion
Hand Wrap =
Hand
Coverlet
Hand
Heat Exchanger
Fig 1
Fig 2
Fig 3
Black Side with
Game Ready Logo
Facing Down
=
=
+
Hand
Sleeve
Hand
Heat Exchanger
+
Inspect the Heat Exchanger
to ensure that there are no
kinks, twists or distortions
Game Ready Logo
Facing Up
Fold Heat Exchanger in half
matching the blue sides
and feed fitting through neck
Black side of
Heat Exchanger
facing up
902805AX1
902804AX1
902805 AX1
902804 AX1
BLUE SIDE
BLUE SIDE
®