Game Winner 165840 User manual

500Lb Protein Feeder
Assembly Instructions
BRAND
HU2339801-GW 20210304-V1.0Pg.1
Customer Service: 1-888-837-1380, 8:00am to 5:00pm, Pacific Standard Time,
Monday thru Friday
Email: [email protected]
-------- OR --------
Customer Service: 1-888-922-2336, 7:00am to 12:00am CST daily
Live Chat at: www.academy.com
Email: [e-mail]
(Made in China)
Please keep this instruction manual for future reference
Style # 165840 (HU2339801-GW)

Table of Contents Page
3-5
6-7
8
9
10
11-14
15
16
17
18-19
Warnings --------------------------------------------------------------------------
Parts List --------------------------------------------------------------------------
Hardware List --------------------------------------------------------------------
Tools required (not included) ----------------------------------------------
Product Diagram ---------------------------------------------------------------
Assembly Instructions -------------------------------------------------------
How to load your feeder -----------------------------------------------------
Care and Maintenance --------------------------------------------------------
Replacement Parts-------------------------------------------------------------
Warranty --------------------------------------------------------------------------
NOTE: Before beginning assembly of product, make sure all parts are present.
Compare parts with package content list and hardware contents. If any part is
missing or damaged, do not attempt to assemble the unit. Contact customer
service for replacement parts.
HU2339801-GW Pg.2 20210304-V1.0

Warnings
PAY ATTENTION to these statements when reading this manual as the information
contained can save your life.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING: Be alert to the possibility of serious bodily injury if the instructions are
not followed. Be sure to read and carefully follow all of the messages.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
YOUR GAME WINNER 500LB PROTEIN FEEDER IS DESIGNED, ENGINEERED AND
CONSTRUCTED IN A MANNER THAT MAKES IT A RUGGED PIECE OF HUNTING
EQUIPMENT THAT WILL GIVE YOU YEARS OF SERVICE. THIS RUGGED
CONSTRUCTION MAKES YOUR FEEDER PHYSICALLY HEAVY. AS SUCH, YOU SHOULD
NEVER ATTEMPT TO ASSEMBLE THIS FEEDER ALONE. YOU MUST HAVE A MINIMUM
OF TWO (2) ADULTS FOR THE SAFE ERECTION OF YOUR FEEDER. FAILURE TO
FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH!
THIS FEEDER MUST BE ERECTED ONLY ON A FIRM AND LEVEL GROUND. BEFORE
FILLING THE HOPPER, RECOMMEND INSTALLING FOUR (4) STAKES (PART #10).
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR
DEATH!
REFER TO THE IMAGES IN THIS MANUAL FOR VISUALIZATION OF THE ASSEMBLY
PROCESS IN ADDITION TO READING THE INSTRUCTIONS.
SOME PARTS MAY CONTAIN SHARP EDGES, SHARP POINTS, OR EDGES THAT CAN
SCRATCH, POKE, OR PUNCTURE. WEAR APPROPRIATE CLOTHING AND SAFETY
GLOVES DURING ASSEMBLY.
THIS UNIT IS HEAVY. DO NOT ASSEMBLE WITHOUT ANOTHER ADULT. FAILURE TO
FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH!
PRIOR TO ATTEMPTING TO USE THIS UNIT, TAKE A MOMENT TO BECOME FAMILIAR
WITH THE ASSEMBLY, SETUP, AND INSTALLATION. FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH!
DO NOT USE THIS UNIT AROUND POWER GENERATING EQUIPMENT
(TRANSFORMERS, GENERATORS, SUBSTATIONS, ETC) AND/OR TRANSMISSION
EQUIPMENT (POWER LINES). FAILURE TO FOLLOW THESE INSTRUCTIONS MAY
RESULT IN SERIOUS INJURY OR DEATH!
HU2339801-GW Pg.3 20210304-V1.0

DO NOT LOAD FEEDER WITHOUT ANOTHER ADULT. FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH!
DO NOT LOAD FEEDER DURING BAD WEATHER SUCH AS STORMS, SNOW,
LIGHTNING, OR THUNDERSTORMS. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY
RESULTS IN SERIOUS INJURY OR DEATH!
DO NOT SIT OR STAND ON OR INSIDE THE HOPPER. FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH!
DO NOT LOAD OVER 500 POUNDS OF FEED. FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY RESULT IN SERIOUS DAMAGE TO THIS UNIT.
DO NOT LOAD FEEDER UNTIL IT IS COMPLETELY ASSEMBLED AND STANDING UP IN
PLACE.
DO NOT STORE OR HANG ITEMS ON THE HOPPER. FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY RESULT IN SERIOUS DAMAGE TO THIS UNIT.
DO NOT DISASSEMBLE AND/OR REMOVE PARTS WITHOUT ANOTHER ADULT
PRESENT. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS
INJURY OR DEATH!
DO NOT ASSEMBLE, DISASSEMBLE, AND/OR REMOVE PARTS FROM THE FEEDER
DURING BAD WEATHER SUCH AS STORMS, SNOW, LIGHTNING, OR
THUNDERSTORMS. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN
SERIOUS INJURY OR DEATH!
THOROUGHLY INSPECT THE FEEDER PRIOR TO EACH USE FOR SIGNS OF WEAR,
ROT, CORROSION, CRACKS, DETERIORATION, AND/OR ANY OTHER TYPE OF DEFECT.
DO NOT USE THIS FEEDER IF IT SHOWS EVIDENCE OF WEAR, ROT, CORROSION,
CRACKS, DETERIORATION, AND/OR ANY OTHER TYPE OF DEFECT. FAILURE TO
FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH. DO
NOT REMOVE, MODIFY, AND/OR OMIT ANY PART OR OTHERWISE MECHANICALLY
MODIFY THIS UNIT OR ITS ASSEMBLY IN ANY MANNER. MODIFICATION, OMMISSION,
AND/OR PART SUBSTITUTION MAY RESULT IN SERIOUS INJURY OR DEATH!
Warnings
HU2339801-GW Pg.4 20210304-V1.0
BEFORE STANDING UP THE FEEDER, YOU MUST…
CHECK ALL HARDWARE TO BE SURE IT IS IN PLACE AND TIGHT.
CHECK ALL BOLTS AND NUTS TO BE SURE THEY ARE FIRM AND
TIGHT.
DO NOT THROW AWAY THE PACKAGING MATERIAL AT THIS TIME.

! IMPORTANT !
THE MANUFACTURER OF THE 500LB PROTEIN
FEEDER IS NOT RESPONSIBLE FOR ANY
INACCURATE INFORMATION YOU HAVE RECEIVED
REGARDING STATE FEEDING REGULATIONS.
PLEASE ALWAYS KEEP YOUR INFORMATION UP-TO-
DATE AND RELIABLE. MANY STATE LAWS CHANGE
AND ARE AMENDED WITHOUT NOTICE. ALWAYS
DOUBLE CHECK YOUR STATE AND SPECIFIC
COUNTY FEEDING LAWS REGARDING THE USE OF
FEEDERS.
Warnings
WV
HU2339801-GW Pg.5 20210304-V1.0

1Lid
1a –catcher –2 pcs
(pre-attached on lid) 1 pc
2 Hopper 1 set
3 Lock Latch 2 pcs
4 Feed Spout 4 pcs
5 Upper Leg 4 pcs
6 Lower Leg 4 pcs
Parts List
Pg.6HU2339801-GW 20210304-V1.0
2A Top Hopper
1a catcher
2B Bottom Hopper

7 Support Bar 2 pcs
8 Leg Skid Blade - A 2 pcs
9 Leg Skid Blade - B 2 pcs
10 Stake 4 pcs
Parts List
Pg.7HU2339801-GW 20210304-V1.0

Hardware List
A Hex. Bolt (M8x20) 8 pcs
BHex. Bolt (M8x15) 52 pcs
C Flat Washer (dia. 8mm) 92 pcs
D Lock Nut (M8) 32 pcs
E Bolt M4x10 4 pcs
F Lock Nut (M4) 4 pcs
Pg.8HU2339801-GW 20210304-V1.0

1 Philips & Flathead Screwdrivers
2 Pliers
3 Wrench
Tools Required (not included)
Pg.9HU2339801-GW 20210304-V1.0

Product Diagram
Pg.10HU2339801-GW
1
2A
2B
4
7
5
6
8
10
3
9
20210304-V1.0

Assembly Instructions
Step 1:
Step2:
B
2B
B
4
C
C
D
Hardware :
#B - 12 pcs
#C - 12 pcs
Attach Feed Spouts (#4) to
base of Bottom Hopper
(#2B) using bolts (B,
M8x15), washers (C, 8 mm).
Tighten bolts with tool
Attach Upper Legs (#5) to
previous hopper assembly
using bolts (B, M8x15),
washers (C, 8 mm) and
lock nuts (D, M8).
Hand Tighten bolts and
nuts in this step
Hardware :
#B - 16 pcs
#C - 32 pcs
#D - 16 pcs
HU2339801-GW 20210304-V1.0
5
Pg.11

Assembly Instructions
Step 3:
Step 4:
Pg.12
Simultaneously attach
Lower Legs (#6) and
Support Bars (#7) to
previous hopper assembly
using bolts (A, M8x20),
washers (C, 8mm) and lock
nuts (D, M8).
Hand Tighten bolts and
nuts in this step
Hardware :
#B - 4 pcs
#C - 8 pcs
#D - 4 pcs
Connect Leg Skid Blades
(#8,9) using bolts (B,
M8x15), washers (C, 8mm)
and lock nuts (D, M8).
Tighten bolts and nuts
with tool
HU2339801-GW 20210304-V1.0
DC
A
7
6
8
9
B
C
D
Hardware :
#A - 8 pcs
#C - 16 pcs
#D - 8 pcs

Assembly Instructions
Step 5:
Step 6:
Pg.13
Attach Leg Skid Blade
assemblies in previous step
to Lower Legs using bolts (B,
M8x15), washers (C, 8 mm)
and lock nuts (D, M8).
*Lower Legs sit on Leg Skid
Blades
Tighten all bolts and nuts
in this step and in steps
2,3 with tool
Attach Lock Latches (#3) to
Top Hopper (#2A) using
bolts (E, M4) and lock nuts
(F, M4).
Tighten bolts and nuts
with tool
HU2339801-GW 20210304-V1.0
BC
D
Hardware :
#B - 4 pcs
#C - 8 pcs
#D - 4 pcs
Hardware :
#E - 4 pcs
#F - 4 pcs
E3F

Assembly Instructions
Step 7:
Step 8:
Put Lid (#1) onto hopper
and lock with Latch Lock
(#3). Then, add Stakes
(#10).
Make sure all bolts and
nuts are tightened with
tool in all steps.
Assembly is now finished.
Pg.14
Attach Top Hopper (#2A) to
Bottom Hopper (#2B) using
bolts (B, M8x15) and
washers (C, 8mm).
Tighten bolts and nuts
with tool
HU2339801-GW 20210304-V1.0
B
C
Hardware :
#B -16 pcs
#C - 16 pcs
10
1
3

HOW TO LOAD YOUR FEEDER
OPEN THE LID AND POUR FEED INTO THE HOPPER. AFTER FILLING, CLOSE THE
LID.
TIPS & POINTERS:
(Q) What kind of feed should I use?
(A) Whole kernel corn is recommended. Whole kernel corn mixed with soybeans
or pellets is also effective for attracting deer. NOTE: When not mixed with
corn, some types of pellets can take on moisture and clog the feeder.
Pg.15HU2339801-GW 20210304-V1.0

Care and Maintenance
•INSPECT FEEDER FOR ANY LOOSE PARTS OR HARWARE REGULARLY
•CHECK IF FEEDER IS TAKING WATER ON RAINY DAYS. SEAL GAP WITH
SILICONE SEALANT IF NECESSARY
•IF RUST APPEARS ON THE EXTERIOR SURFACE OF FEEDER, CLEAN AND
BUFF THE AFFECTED AREA WITH STEEL WOOL OR FINE GRIT SAND PAPER /
EMERY CLOTH. TOUCH-UP WITH A GOOD QUALITY PAINT
•STORE FEEDER INDOORS WHEN NOT IN USE
•CLEAN FEEDER HOPPER REGULARLY TO AVOID CLOGGING
HU2339801-GW 20210304-V1.0Pg.16

Replacement Parts
HU2339801-GW 20210304-V1.0
Part Number Component Part Name
MET-CF0017 1 Lid
MET-CF0018 2A Top Hopper
MET-CF0019 2B Bottom Hopper
MET-CF0020 3 Lock Latch
MET-CF0021 4 Feed Spout
MET-CF0022 5 Upper Leg
MET-CF0023 6 Lower Leg
MET-CF0024 7 Support Bar
MET-CF0025 8 Leg Skid Blade –A
MET-CF0026 9 Leg Skid Blade –B
MET-CF0027 10 Stake
HAR-CF0004 Hardware Pack
Pg.17

Warranty Information
1. Manufacturer warrants this product to be free from defects in workmanship and
materials for a period of 90 days from the date of purchase, PROVIDED claims are
submitted, in writing, with proof of purchase.
2. If any part of this item fails because of a manufacturing defect within the Limited
Warranty Period, manufacturer offers to replace such part(s) provided that such
parts have not been improperly repaired, altered, or tampered with or subject to
misuse, abuse, or exposed to corrosive conditions. This Limited Warranty is,
however, subject to certain limitations, exclusions, time limits, and exceptions
(hereinafter “conditions”) as listed below. Read these conditions carefully.
3. This Limited Warranty shall be limited to the replacement or repair of any part(s)
which manufacturer determines, after reasonable examination, to have been
defective at the time of manufacturing and manufacturer’s obligation(s) shall be
limited to replacement, if any, of defective part(s) which shall be shipped at original
purchaser’s expense to original purchaser’s designated shipping address.
4. This Limited Warranty is given to and covers the ORIGINAL PURCHASER ONLY
and such coverage terminates 90 days from the date of purchase.
5. DAMAGE LIMITATION WARNING: IN NO EVENT SHALL MANUFACTURER BE
LIABLE FOR ANY INCIDENTIAL OR CONSEQUENTIAL DAMAGES, INCLUDING
(BUT NOT LIMITED TO) LOSS OF USE OF THE PRODUCT, LOSS OF TIME,
INCONVENIENCE, EXPENSES FOR TRAVEL, TRANSPORTATION, LODGING
EXPENSES, LOSS OF FOOD, LOSS BY DAMAGE TO PERSONAL PROPERTY
OR LOSS OF INCOME, PROFITS OR REVENUE.
6. MANUFACTURER’S OBLIGATION: Manufacturer’s liability shall be limited to the
delivery of a good, merchantable product, and, if necessary, the repair or
replacement, at manufacturer’s option, of any defective part or unit.
7. TRANSFER LIMITATIONS: This Limited Warranty is not assignable or
transferable. It covers only the original purchaser.
8. RESERVED RIGHT TO CHANGE: Manufacturer reserves the right to make
changes or improvements to products it produces in the future without imposing on
itself any obligations to install the same improvements in the products it has
previously manufactured.
9. This Limited Warranty gives the original purchaser specific legal rights, but there
may be other rights which vary by jurisdiction.
10. This warranty does not cover the following items:
- Chips or scratches on porcelain or painted surfaces
- Rust or corrosion is not deemed a manufacturing or materials defect
- Discoloration or loss of paint due to handling during assembly, heat, or
cleaning products. Paint may require touch up.
- Stainless steel discoloration or corrosion
- Consumables such as batteries
- Damages caused by wild game
Pg.18HU2339801-GW 20210304-V1.0

IF CUSTOMER SERVICE IS NECESSARY:
The original purchaser is responsible for shipping and handling charges
of the returned item(s) and replacement parts, if any.
All parts to be replaced will need to be shipped before replacement
items will be sent.
Follow the customer service representative’s instructions exactly. If a
return is necessary, it must be packed carefully and shipped prepaid.
Should you encounter any problems
obtaining replacement parts,
CALL US FIRST.
Do not return product to the store.
WE CAN HELP.
Rankam (China) Manufacturing Co. Ltd.
18/F., New Lee Wah Centre, 88 Tokwawan Road,
Kowloon, Hong Kong
Please contact Rankam Customer Service at
[e-mail]
or at 1-888-837-1380, Mon to Fri, 8:00 a.m. –5:00 p.m. Pacific Standard Time.
Warranty Information
Pg.19HU2339801-GW 20210304-V1.0