Garmin Approach Z82 User manual

APPROACH Z82
Owner’s Manual

© 2020 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written
consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the
content of this manual without obligation to notify any person or organization of such changes or improvements.
Go to Garmin.com.sg for current updates and supplemental information concerning the use of this product.
Garmin, the Garmin logo, and Approach are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA
and other countries. Garmin Golf and Garmin Express are trademarks of Garmin Ltd. or its subsidiaries. These
trademarks may not be used without the express permission of Garmin.
Apple®is a trademark of Apple Inc., registered in the U.S. and other countries. The BLUETOOTH®word mark and
logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. Windows®is
a registered trademark of Microsoft Corporation in the United States and other countries. Other trademarks and
trade names are those of their respective owners.
M/N: A03831

Table of Contents i
Table of Contents
Introduction������������������������������������������������� 1
Device Overview ..................................................... 1
Status LEDs ........................................................ 1
Charging the Device............................................... 1
Turning On the Device............................................ 1
Standby Mode ........................................................ 2
Adjusting the Eyepiece .......................................... 2
Bluetooth®Connected Features ������������������� 2
Pairing Your Smartphone ...................................... 2
Playing Golf������������������������������������������������� 2
Measuring the Distance to the Pin........................ 2
Hole View................................................................ 2
Viewing PlaysLike Distance............................... 3
Viewing the Direction to the Pin........................ 3
Enabling Tournament Mode .............................. 3
Changing Holes .................................................. 3
Ending a Round .................................................. 3
Alternate Greens .................................................... 3
Keeping Score ........................................................ 3
Enabling Statistics Tracking.............................. 4
Measuring a Shot................................................... 4
9 + 9 Hole Golf ? ..................................................... 4
Sight Something������������������������������������������ 4
Measuring the Distance to a Target...................... 4
Customizing Your Device ����������������������������� 4
Settings .................................................................. 4
Calibrating the Compass ................................... 5
System Settings................................................. 5
Device Information �������������������������������������� 5
Device Care............................................................. 5
Cleaning the Device............................................ 5
Long-Term Storage............................................. 5
Stable Signal Transmission............................... 5
Attaching the Carabiner Clip ................................. 5
Specifications ........................................................ 5
Viewing E-label Regulatory and Compliance
Information............................................................. 6
Troubleshooting ������������������������������������������ 6
Ranging Accuracy.................................................. 6
Acquiring Satellite Signals .................................... 6
My device cannot find nearby golf courses ......... 6
Disconnecting the USB Cable............................ 6
Restoring All Default Settings............................... 6
Product Updates .................................................... 6
Setting Up Garmin Express................................ 7
Getting More Information ...................................... 7

Introduction 1
Introduction
WARNING
See the Important Safety and Product Information guide
in the product box for product warnings and other
important information.
Device Overview
1Press to open the menu and
scroll through menu options.
2Press to turn on the device.
Press to open the menu and
scroll through menu options.
Hold to turn off the device.
3
Tournament
mode LED
View tournament mode status.
4
Press to range with the laser.
While playing golf, the flag finder
feature starts automatically.
Press to select menu options.
5
Adjustable
diopter
Rotate the eyepiece to focus the
screen.
6
Status LED View device and battery status.
7
Weather cap
Micro-USB
power and data
port (under
weather cap)
Pull up to access the micro-USB
power and data port.
Connect a compatible USB cable
to charge the device or transfer
data using your computer.
8
Device label
View manufacturer's
identification and certification.
Status LEDs
LED Activity Status
Solid blue (for 5 seconds after
turning on)
The device is turned
on.
Alternating red and blue (for 5
seconds after turning on) The battery is low.
Off The device is in active
mode.
Slow flashing blue The device is in
standby mode.
Solid red (after holding the
power button)
The device is turned
off.
Rapid flashing red (connected
to a power source)
The device is
charging in energy-
saving mode.
Solid blue and flashing
red (connected to a power
source)
The device is
charging.
Solid red (connected to a
power source) Charging is complete.
Slow flashing red A software update is
in progress.
Charging the Device
WARNING
This product contains a lithium-ion battery. To prevent
the possibility of personal injury or product damage
caused by battery exposure to extreme heat, store the
device out of direct sunlight.
NOTICE
To prevent corrosion, thoroughly dry the USB port,
the weather cap, and the surrounding area before
charging or connecting to a computer.
The device is powered by a built-in lithium-ion battery
that you can charge using a standard wall outlet or a
USB port on your computer.
NOTE: The device will not charge when outside the
approved temperature range (Specifications, page5).
1 Pull up the weather cap from the USB port.
2 Plug the small end of the USB cable into the USB
port on the device.
3 Plug the large end of the USB cable into an
external power source, such as an AC adapter or a
USB port on your computer.
4 Charge the device completely.
TIP: You can turn off the device to charge it faster.
Turning On the Device
The first time you turn on the device, you are prompted
to choose a language, select a unit of measure, and
set your driver distance.
1 Press .

2 Bluetooth® Connected Features
2 Follow the on-screen instructions.
Standby Mode
To conserve battery life, the device goes into standby
mode when not in use. The device wakes up when you
hold it with your thumb in the groove on the bottom of
the device or push any button.
Adjusting the Eyepiece
The device features an adjustable eyepiece (+/- 4 diopter
adjustment). This allows you to focus the screen for
your eyesight.
Rotate the eyepiece to focus the screen.
Bluetooth®Connected Features
This device includes Bluetooth connected features for
your compatible mobile device using the Garmin Golf™
app.
Scorecard uploads to Garmin Golf: Automatically
sends scorecards to the Garmin Golf app when you
sync your device. This allows you to view detailed
statistics and participate in online leaderboards.
Wind speed and direction: Shows the wind speed
and direction on the hole view screen. The wind
direction is relative to the pin.
Find My Garmin: Allows you to use the Garmin Golf
app to locate your rangefinder using its last known
location.
Pairing Your Smartphone
To use the connected features of your rangefinder,
it must be paired directly through the Garmin Golf
app, instead of from the Bluetooth settings on your
smartphone.
1 From the app store on your smartphone, install and
open the Garmin Golf app.
2 Bring your smartphone within 10 m (33 ft.) of your
device.
3 On your rangefinder, select or to open the
menu.
4 Select Settings > Bluetooth > Pair.
5 From the or menu in the app, select Garmin
Devices>Add Device, and follow the on-screen
instructions.
Playing Golf
NOTE: If you found a golf course with data that’s
inaccurate or outdated, please send us a report at
Report a Golf Course Issue.
Select Play Golf.
The device locates satellites and calculates your
location. The nearest course is selected, and the
hole closest to your current location is displayed
automatically.
NOTE: You can select a course from the list if there
is more than one course near your current location.
Measuring the Distance to the Pin
You can use the flag finder feature to target the
flag and measure the distance from your current
position to the pin. This feature helps get an accurate
distance to the pin by filtering out other objects in the
background.
1 Start playing a round of golf.
2 Align the rangefinder reticle with the flag.
NOTE: For best results, you should hold the device
steady, and align the reticle with the flag instead of
the pin.
3 Press .
The measured range to the pin appears. A red arc
appears on the map at the laser-ranged distance.
If the device is able to target the flag, the device
vibrates, a flag icon appears, the distance arc
is yellow, and the hole view map automatically
transitions to a close up of the green.
TIP: You can return to the hole view by pointing the
device away from the green and pressing .
Hole View
The device shows the current hole you are playing,
and automatically transitions when you move to a new
hole.
1Displays distances to the beginning of the
fairway, and the front and back of hazards.
2Displays the current hole number.
3Displays the par for the current hole.
4Displays your recorded score.

Playing Golf 3
5Displays the distance from the last ranged
location.
6Displays a low battery indicator when the
battery level is low.
7Displays your phone connectivity status.
8Displays distances to the front, center, and back
of the green.
9Displays wind direction and speed.
10
Displays your driver distance when you are on
the tee box.
11
Displays the selected green on a hole with
alternate greens.
Viewing PlaysLike Distance
The plays like distance feature accounts for elevation
changes on the course by showing the adjusted
distance to the flag.
1 Select or to open the menu.
2 Select PlaysLike Distances�
1Distance to the flag as measured by the
laser.
2PlaysLike distance to the flag, adjusted for
slope.
3
Elevation difference between you and the
target based on the slope of the rangefinder.
The symbol indicates whether the slope is
uphill , flat , or downhill .
Viewing the Direction to the Pin
The PinPointer feature is a compass that provides
directional assistance when you are unable to see the
green. This feature can help you line up a shot even if
you are in the woods or in a deep sand trap.
NOTE: Do not use the PinPointer feature while in a
golf cart. Interference from the golf cart can affect the
accuracy of the compass.
1 Select or to open the menu.
2 Select PinPointer�
The compass arrow points to the pin location. A
cone appears on the map to help orient you toward
the pin.
TIP: You can press any key to return to the hole
view.
Enabling Tournament Mode
The tournament mode setting disables the PinPointer
and PlaysLike distance features. These features
are not allowed during sanctioned tournaments or
handicap calculation rounds.
1 Select or to open the menu.
2 Select Settings > Tournament Mode.
The tournament mode LED on top of the device
appears solid blue when the tournament mode
setting is enabled.
Changing Holes
You can change holes manually from the hole view
screen.
1 Select or to open the menu.
2 Select Change Hole.
3 Select an option.
Ending a Round
1 Select or to open the menu.
2 Select End Round.
Alternate Greens
Some golf courses in Asia feature a two-green system
with alternate greens on one hole: a left green and a
right green.
When a hole with alternate greens is selected, the
appears beside the hole number with an L indicating
the left green, or an R indicating the right green.
You can change greens manually from the hole view
screen.
1 Select or to open the menu.
2 Select Change Green.
3 The other green is selected.
Keeping Score
1 Press or to open the menu.
2 Select Scorecard.
NOTE: If scoring is not enabled, you can select
Start Scoring.

4 Sight Something
3 If necessary, press or until the hole you want
to score is highlighted.
4 Press to select the hole.
5 Press or to set the score.
6 Hold any key to exit.
Enabling Statistics Tracking
When you enable statistics tracking on the device, you
can view your statistics for the current round. You can
compare rounds and track improvements using the
Garmin Golf app.
1 Press or to open the menu.
2 Select Settings > Stat Tracking.
Recording Statistics
Before you can record statistics, you must enable
statistics tracking (Enabling Statistics Tracking,
page4).
1 From the scorecard, select a hole.
2 Set the number of strokes taken, and press .
3 Select an option:
NOTE: If you are on a par 3 hole fairway information
does not appear.
• If your ball hit the fairway, select .
• If your ball missed the fairway, select or .
4 Set the number of putts taken, and press .
Measuring a Shot
1 Enable the Auto Measure Shot feature (Settings,
page4).
2 While playing golf, use your rangefinder to measure
the distance to the pin.
3 Walk to your ball.
The distance from the ranged location is
automatically measured and appears on the hole
view screen.
The distance resets the next time you use your
rangefinder to measure the distance to the pin.
9 + 9 Hole Golf ?
There are fewer standard 18-hole golf courses in Asia
due to the limitations in space and terrain. This feature
records two 9-hole courses in the same club for an 18-
hole round of golf.
1 Select Play Golf.
2 After the device acquires your location, select the
front nine golf course.
3 Select 18-hole.
4 Select an option:
• Select Yes, and select the back nine course and
teeboxes.
• Select Later to play the front nine first. During
the round, select Add Back Nine to add the
course and tee for the back nine.
NOTE: During a 9-hole golf round, you can also
select Add Back Nine to make this an 18-hole
round.
Sight Something
Measuring the Distance to a Target
You can use the device to measure the distance from
your current position to a target, such as on a driving
range.
NOTE: The device can measure distances from 5 to
411 m (5.5 to 450 yd.).
1 Select Sight Something.
2 Align the rangefinder reticle with the target.
3 Press .
The measured range appears.
Customizing Your Device
Settings
Select Settings.
Bluetooth: Allows you to enable Bluetooth technology
or pair your smartphone with your rangefinder
(Pairing Your Smartphone, page2).
Tournament Mode: Disables the PinPointer and
PlaysLike distance features. These features are not
allowed during sanctioned tournaments (Enabling
Tournament Mode, page3).
Stat Tracking: Allows you to enable statistics tracking
on the device (Enabling Statistics Tracking,
page4).
Auto Measure Shot: Allows you to enable automatic
shot measurements based on your last ranged
location.
Driver Distance: Sets the average distance the ball
travels on your drive. This distance appears as an
arc on the hole view screen when you are on the
tee box.
Compass Calibration: Allows you to manually calibrate
the compass sensor (Calibrating the Compass,
page5).
Gender: Allows you to set your gender. This is used
for gender- specific course ratings for select
tees when calculating handicaps, and for gender-
specific par values (where available).
System: Sets system settings, such as the text
language on the device, the units of measure, and
time format (System Settings, page5).
About: Displays device information, such as the unit
ID, software version, regulatory information, and
license agreement (Viewing E-label Regulatory and
Compliance Information, page6).

Device Information 5
Calibrating the Compass
NOTE: You must calibrate the electronic compass
outdoors. Do not stand near objects that influence
magnetic fields, such as cars, buildings, or overhead
power lines.
Your device was already calibrated at the factory,
and the device uses automatic calibration by default.
If the PinPointer feature is not working properly, for
example, after moving long distances or after extreme
temperature changes, you can manually calibrate the
compass.
1 Select Settings > Compass Calibration.
2 Follow the on-screen instructions.
System Settings
Select Settings > System.
Language: Sets the text language on the device.
NOTE: Changing the text language does not
change the language of user-entered data or map
data.
Units: Sets the unit of measure for distance.
Time Format: Sets the device to show time in a 12-
hour or 24- hour format.
Brightness: Sets the brightness level of the backlight.
Auto Standby: Adjusts the amount of time before the
device automatically goes into standby mode
(Standby Mode, page2).
Reset: Allows you to reset user data and settings
(Restoring All Default Settings, page6).
Device Information
Device Care
NOTICE
Do not store the device where prolonged exposure
to extreme temperatures can occur, because it can
cause permanent damage.
Avoid chemical cleaners, solvents, and insect
repellents that can damage plastic components and
finishes.
Secure the weather cap tightly to prevent damage to
the USB port.
Cleaning the Device
NOTICE
Do not use a dry cloth to clean the lens. Use of a dry
cloth may damage the lens.
Avoid chemical cleaners and solvents that can
damage plastic components.
1 Wipe the outer casing and lens with a soft, non-
scratch cloth dampened with water or alcohol.
2 Wipe the outer casing dry, and allow the lens to air
dry.
Long-Term Storage
When you do not plan to use the device for several
months, you should charge the battery to at least
50% before you store the device. You should store the
device in a cool, dry place with temperatures around
the typical household level. After storage, you should
fully recharge the device before using it.
Stable Signal Transmission
Before connecting the charging cable to Approach,
affix the ferrite bead 1to the cable roughly 2 cm from
the plug 2.
NOTE: A ferrite bead needs to be attached to the
charging cable near the USB plug. The ferrite bead will
prevent electromagnetic interference from the cable.
Do not relocate or remove the ferrite bead.
NOTE: The ferrite bead is included for certification
purposes in Taiwan and Korea only.
Attaching the Carabiner Clip
1 Position the carabiner clip in the slots on the
mounting spine of the carry case.
2 Slide the carabiner clip up until it locks in place.
Specifications
NOTICE
Typical value tested under Garmin’s laboratory
conditions. The actual battery life depends on the
features enabled on your device and environmental
factors, such as activity tracking, wrist-based heart

6 Troubleshooting
rate, smartphone notifications frequency, GPS status,
internal sensors, and connected sensors.
Battery type Rechargeable, built-in lithium-
ion battery
Battery life Up to 15 hr. typical use
Water rating IEC 60529 IPX71
Operating
temperature range
From -10º to 55ºC (from 14º to
131ºF)
NOTE: The device protects
itself from overheating and
shuts down automatically if the
internal temperature exceeds
the operating temperature
threshold.
Charging
temperature range
From 10º to 45ºC (from 50º to
113ºF)
1 The device withstands incidental exposure to water of up to 1 m for up
to 30 min. For more information, go to Garmin.com.sg/legal/waterrating.
Viewing E-label Regulatory and Compliance
Information
The label for this device is provided electronically.
The e-label may provide regulatory information, such
as regional compliance markings, as well as applicable
product and licensing information.
1 Select Settings.
2 Select About.
Troubleshooting
Ranging Accuracy
External factors may affect ranging accuracy, such as
ambient light, weather conditions, target reflectivity,
and target size.
yThe device can target longer ranges in lower
light conditions, such as on overcast days. Bright
sunlight minimizes ranging ability.
yRain minimizes ranging ability.
yThe device can target longer ranges when
measuring the distance to brightly colored,
reflective, or shiny objects. Black objects are less
reflective, and can be targeted at shorter ranges.
yLarger objects are easier to target than smaller
objects. For example, you should target the flag
instead of the pin.
yThe device can target longer ranges when the
angle to the target is closer to 90 degrees. A
smaller angle to the target limits ranging ability.
Acquiring Satellite Signals
The device may need a clear view of the sky to
acquire satellite signals. The time and date are set
automatically based on the GPS position.
1 Go outdoors to an open area.
The top of the device should be oriented toward
the sky.
2 Wait while the device locates satellites.
It may take 30–60 seconds to locate satellite
signals.
My device cannot find nearby golf courses
If a course update is interrupted or canceled before it
completes, your device may be missing course data.
To repair missing course data, you must update the
courses again.
1 Download and install course updates from the
Garmin Express application (Product Updates,
page6).
2 Safely disconnect your device (Disconnecting the
USB Cable, page6).
3 Go outside, and start a test round of golf to verify
the device finds nearby courses.
Disconnecting the USB Cable
If your device is connected to your computer as a
removable drive or volume, you must safely disconnect
your device from your computer to avoid data loss. If
your device is connected to your Windows®computer
as a portable device, it is not necessary to safely
disconnect the device.
1 Complete an action:
• For Windows computers, select the Safely
Remove Hardware icon in the system tray, and
select your device.
• For Apple®computers, select the device, and
select File > Eject�
2 Disconnect the cable from your computer.
Restoring All Default Settings
1 Select Settings > System > Reset.
2 Select an option:
• Select Reset Default Settings to reset all of the
device settings to the factory default values and
save all user- entered information.
• Select Delete Data and Reset Settings to delete
all user- entered information and reset all of the
device settings to the factory default values.
Product Updates
On your computer, install Garmin Express (Garmin.com.
sg/express).
This provides easy access to these services for
Garmin devices:
ySoftware updates
yCourse updates
yProduct registration

Troubleshooting 7
Setting Up Garmin Express
1 Connect the device to your computer using a USB
cable.
2 Go to Garmin.com.sg/express.
3 Follow the on-screen instructions.
Getting More Information
yGo to support.Garmin.com/en-SG for additional
manuals, articles, and software updates.
yGo to Garmin.com.sg/minisite/approach.
yGo to Garmin.com.sg/buy, or contact your Garmin
dealer for information about optional accessories
and replacement parts.

support.Garmin.com/en-SG
May 2020
190-02635-2H Rev. A