NanoHARD User Guide
- 6 -
Debouncing
It provides full compatibility with micro-switches. It is fully resistant
to contact bounce. You gain a bigger ROF, faster trigger response and
your MOSFET becomes less heated.
MOSFET of the 3rd Generation
Usage of most modern transistors and microcontroller enabled us to
create the smallest and most reliable MOSFET in the market.
WE GUARANTEE that the MOSFET will work with the strongest AEG
replicas. If you damage the MOSFET, we will reimburse you for 100%
of your costs or replace it with a new one at our expense.
MOSFET
Do you want to achieve a higher rate of re and faster trigger
response? Are you planning a power upgrade of your rie? In that
case, you need a MOSFET.
It targets the energy from the battery directly to the motor, bypassing
the mechanical trigger contacts. As a result, you will gain higher rate
of re of the rie and a faster trigger response, and the contacts will
be protected against burn out.
Protection against Over-Discharge of Battery
Modern LiPoly batteries are very sensitive to over-discharge. If you
do not want to damage the battery and you care about its service
life, this protection is indispensable. Microprocessor will constantly
watch over the battery voltage. When it drops down to critical value,
it will not permit to make a shoot.
DEBOUNCING
BATTERY
PROTECTION
Li-Po
Ready
14.8V
14.8V LI-PO READY
The system can be used with any battery up to LI-PO 14.8V. Minimum
operating voltage is 3V and absolute maximum voltage is 17V.
