Gator GRM430EM User manual

!!
!
!
USER%G UIDE%GRM430EM !
Introduction
Thank you for purchasing the Gator GRM430EM. This product is designed to provide a high-
resolution display when attached to reverse camera or video input.
Product Overview
The GRM430EM is an OE Grade Mirror Monitor that is reverse mirror compatible. It is just like a
normal rear view mirror with a built in 4.3” screen allowing you to see what is behind the vehicle
when reverse gear is engaged (additional rear view camera needed).The GRM430EM has dual
video inputs, allowing for connection to a car DVD player or a front view camera (not included)
Product Features:
OEM Look and OEM quality mirror.
4.3” High-Definition LCD Monitor with Auto adjusting brightness control
OEM wire harness cover for factory look
Two (2) Video inputs
Anti-Glare mirror
Easy Installation

Technical Specifications:
Do not use the Mirror in a damp working environment, as it is not waterproof.
Do not open or try to repair the Mirror by yourself. If the unit or any accessories for the Mirror
have any problems, please take it to an authorized repair agent for repair.
Do not use chemicals, solventsor cleanersto clean the Mirror, please use a moist soft cloth.
Please care for the environment, do not discard this machine randomly; do not throw the Mirror
into a fire, as it may explode.
Package Components:!
Panel TFT LCD (Digital) Power Supply DC12V
Screen Size 4.3” Brightness 1000cd/m2
Resolution 480x272 OSD Menu Available
Aspect Ratio 16:9 Signal System PAL/AUTO/NTSC
Power 3.6W (Working) Two Video Inputs
AV1-Additional Input
Consumption 0.3W (Standby)
AV2-Camera
Mirror
Power cable with
fuse
Wiring cover
Allen key
Glass mounting
Metal button

3
2
1
Produ c t S tructure:
1. Ambient light sensor
2. Power ON/Off/ Brightness Adjust
3. Working indicator
System Operation
This system has signal sensing. When the Video 1 or 2 inputs see a signal, the display will
automatically turn on. When the signal is removed, it will automatically turn off. If both inputs see
a signal, Input 2 will override Input 1.
Auto–Adjusting Brightness Feature
The brightness of the 4.3” LCD screen will adjust automatically to its environment’s lighting
conditions. In brighter conditions, the display will brighten to increase the image’s view ability. In
darker conditions, it will decrease its brightness so as not to over-stimulate the driver’s eyesight.
Operation:
1.While using the Video 1 Input, you can press the Power button to turn the monitor ON/OFF
2. While using the Video 2 Input (Backup Camera), you can press the Power button to adjust the
image brightness.

F
M
Moulded
splitter
+
(Camera priority)
(Video1 input)
(Video2 input)
(Red-Accessory)
(Black- Ground)
Inline
fuse
Installation Notes
This system is has signal sensing, there is no “reverse trigger wire” in the wire harness. Be sure to
use a relay with CANBUS vehicles (not included) to power your camera, as most vehicles’ reverse
lamp wires are now variable voltage wires, and will cause a fuzzy or distorted image. (PIC 2)
Installation
1. Remove OEM mirror and replace with supplied LCD mirror. LCD mirror can be mounted to the
vehicles existing window mounts, or by using the adapter and glass mounting metal button
included. Glue the mounting metal button to the vehicles window glass using rear view mirror
glue (not included). Tighten mount to metal button with Allen key provided.
2. Adapters for other vehicles can also be purchased separately. (www.aerpro.com.au)
3. Run your wiring harness into the headliner and down the vehicles A-Pillar, making sure to
avoid any factory airbags. Secure your wiring with zip-ties.
4. Make all necessary wiring connections (See wiring diagram PIC 1)
PIC 1
PIC 2
Black (Ground) – Locate a suitable location to ground (negative) the Black wire in the wiring
harness. You may connect this wire to a factory ground point in the vehicle, or attach a ring terminal
to the black wire and screw into the body of the vehicle. If you choose to screw into the body, clean
the area of any paint or adhesives to allow for good metal-to-metal contact.

Buttery Camera
Power connector
(Positive wire connects to
reversing lamp/ Negetive wire
connects to chassis or negative of lamp)
(Connects to video input source)
F
M
FM F
Moulded
splitter
M
M
+
6 Metres
1.5 Metres
Adding a reverse camera
Installing optional reversing camera (not included)(Gator G30C model)
Technical Assistance
If youneed assistance setting up orusing your Gator product nowor in the future, call
Gator Support.
Australia
TEL: 03 – 8587 8898
FAX: 03 – 8587 8866
Mon-Fri 9am – 5pm AEST
Please retain this user guide for futurereference.
If you would like to download a digital copy of this manual, or other Gator manuals/software, please
visit the TDJ.com.au website and click ‘Help/Downloads’ for information on where to find the
manuals/software.