Gazer MMR71 SERIES User manual

MMR71xx/MMR51xx/MMR70xx/
MMR50xx/MUR7100/MUR5100/
MUR7000/MUR5000
USER MANUAL
CAR REARVIEW MIRROR WITH BUILT-IN MVR

RU
ENG
UA
User manual ............................................... 4
Руководство пользователя ........................ 16
Посібник користувача ............................... 28

ENG
4
Contents
1. Warning ............................................................................. 5
2. Important information.......................................................... 6
3. Package contents................................................................. 7
4. Controls ............................................................................. 8
5. Usage ...............................................................................10
6. Mirror installation ...............................................................14
7. Specications.....................................................................15

5
ENG
Warning
Congratulations on your purchase of Gazer
car rearview mirror with built-in DVR.
Please read this manual carefully, before using the device.
Warnings
• Do not use chemicals to clean the device. Please use a soft cloth to
clean the body, mirror surface and lens.
• Avoid shocks, falls and mechanical damage to the device.
• Follow temperature exploitation regime! Storage from -30°С to
+70°С, usage from -20°С to +65°С.
• Do not attempt to repair the appliance yourself. In case of any
damage contact your dealer or service center.
• To install and connect the mirror without voiding your car’s war-
ranty, please consult with the personnel of service stations where
your car is serviced.
• The manufacturer is not responsible for any losses or missed op-
portunities due to use of videos and data obtained with the help of
this device.

ENG
6
Important information
Warning!
• Do not insert or remove the SD card when the device is on. This
can lead to the built-in DVR malfunction. Wait for 30 seconds
after DVR shut down and only then safely remove the memory
card.
• Set the correct time and date before using the device.
• Use at least 0.5 seconds time interval while pressing control
buttons, this guarantees proper functioning of the device.
• When connecting the device, use only the original power supply
cable.
• Use the restart option by (long pressing ON/OFF button) in the
following cases:
• power indicator is not on when the power supply cable is con-
nected;
• the device does not switch from the standby to the recording
or control mode;
• the device fails to function properly.
• Files protected from overwriting by G-sensor are recorded in a
loop with a 15 les limit. Closely monitor the free space remaining
on the memory card to avoid loss of protected les due to loop
overwriting that takes place within the limits allocated for such
les on the memory card.

7
ENG
Package contents
MMR51xx/MMR71xx
MMR50xx/MMR70xx
MUR5100/MUR7100
MUR5000/MUR7000 rear-
view mirrors with a built-in
DVR
Power cord (+12V) for
camera, video source,
and parking sensors
Mirror connection cable
with a switching and
control unit
Remote control
Windshield cover for
cable concealment
GPS antenna
User manual

ENG
8
Controls
Fig. 1
1. Built-in display4.3”
2. Mirror
3. Device mode indicator
4. ON/OFF button –turns the
monitor on/off; reset button
(long press); monitor bright-
ness adjustment (in the rear-
view camera display mode).
5. Passenger compartment
light sensor
6. Switching unit input jack
7. Lens
8. Ambient light sensor
9. Mirror socket
10. GPS antenna socket
11 MicroSD memory card slot
WATT+ (yellow)
АСС+ (red)
GND- (black)
REVERSE(green)
REVERSE (green)
PDC*
Camera IN (RCA)
DC+12V Out
1
9 6
2
3
4
5
11
8
10
7
*PDC jack is used for connecting Gazer PA-XXX series parking assistant.

9
ENG
Fig. 2
1. POWER –switch on/switch
off the display.
2. SEL/REC –stop/start
recording; activation of the
setting.
3-4. UP/DOWN –navigation
menu.
5. The lines parking set-
tings button
6. MODE –switch between
video.
7-8. The line parking angle
setting button
9. MENU –input/output menu.
Controls
POWER SEL/REC
DOWN/
MODE
P
UP/MENU
1 2
3
4
5
6
78
9

ENG
10
Usage
• Designed for installation in the passenger compartment instead of
the stock rear-view mirror, MMR51xx/MMR71xx/MMR50xx/MMR70xx,
MUR5100/MUR7100/MUR5000/MUR7000 Gazer rear-view mirror has a
built-in 4.3’’ (16:9) monitor and a Super HD (for MMR51xx/ MMR71xx/
MUR5100/MUR7100 models) or a Full HD (for MMR50xx/ MMR70xx/
MUR5000/MUR7000 models) DVR. “xx” symbols in the name of the
model indicate the type of the windshield mount compatible with a
specic car model.
• The built-in monitor supports PAL or NTSC video standards and can
automatically detect and switch to the required standard.
• When the built-in DVR is on, the image will be displayed on the monitor
continuously. One can use the ON/OFF button to turn the built-in
display on or off (the DVR will keep on recording).
•Camera IN input is designed for receiving video feed from the
rear-view camera. When the car is backing up (with the rear-view
camera broadcasting the video signal), the image from the camera
will be displayed on the built-in monitor. Camera IN video input is
prioritized: when the DVR and the rear-view camera provide video
feed simultaneously, the monitor automatically switches to the rear-
view camera viewing mode. If the monitor was turned off by pressing
the ON/OFF button, it will turn on automatically when the Camera
IN video input receives video feed and turn off when the video feed is
terminated. If the rear-view camera is on and the monitor is receiving
video feed from the camera, the DVR will not stop recording.
• In Gazer MMR51xx/MMR71xx/MMR50xx/MMR70xx MUR5100/
MUR7100/MUR5000/MUR7000 models, the brightness of the built-
in monitor can be adjusted automatically. This function is enabled by
default, and, depending on the lighting conditions inside the car, the
monitor will automatically adjust the brightness of its screen to the
required level.
• When the video feed from the rear-view camera is displayed on the
built-in monitor, one can use the ON/OFF button to adjust the screen
brightness. Video input display parameters can also be congured with
the MENU button when the video input is active. All custom settings will
be saved and remain in effect the next time the video input is enabled.
•Gazer MMR71xx/MMR70xx MUR7100/MUR7000 models have auto-
dimming function. The mirror surface of these devices dims automatically
whenever it catches bright light from the headlights of vehicles traveling
behind at night. This protects the driver from dazzling through the rear-
view mirror, which makes driving a car at night more comfortable. In
addition, the mirror surface dimming intensity changes automatically
depending on the lighting conditions.