GBRacing BA12-6-GBR-SET User manual

FITTING INSTRUCTIONS
TO BE FITTED BY A QUALIFIED TECHNICIAN
Part Nos. BA12-6-GBR-SET / BA12-8-GBR-SET / BA12-10-GBR-SET / BA12-10-1-5-GBR-SET / BA12-6-RSV4-GBR-SET
THIS SHEET INCLUDES FITTING INSTRUCTIONS FOR THE FOLLOWING PARTS:
PADDOCK STAND BOBBINS All Models
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
1 Assemble M6 x 40mm Bolt & M6 Washer fthrough the moulded bobbin.
2 Tighten bolts to swing arm boss, 8 Nm.
DO NOT OVERTIGHTEN
PADDOCK STAND / BOBBIN SET
PART NO. BA12-6-GBR-SET
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
1 x Moulded Paddock Stand / Bobbin
2 x M6 x 40 Bolts
1 x M6 Washer
(1) Assemble M8 x 40mm Bolt thru moulded
bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M8 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-8-GBR
(1) Assemble M8 x 40mm Bolt thru moulded
bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M8 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-8-GBR
(1) Assemble M8 x 40mm Bolt thru moulded
bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M8 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-8-GBR
(1) Assemble M8 x 40mm Bolt thru moulded
bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M8 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-8-GBR
1 Assemble M8 x 40mm Bolt through the moulded bobbin.
2 Tighten bolts to swing arm boss, 8 Nm.
DO NOT OVERTIGHTEN
PADDOCK STAND / BOBBIN SET
PART NO. BA12-8-GBR-SET
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
1 x Moulded Paddock Stand / Bobbin
2 x M8 x 40 Bolt
1 Assemble the M10 Stainless Steel bolt through the moulded bobbin and the Black Anodised Bush.
2 Tighten bolts to the swing arm boss, 8 N/m.
DO NOT OVERTIGHTEN.
PADDOCK STAND / BOBBIN SET
PART NO. BA12-10-GBR-SET
M10 x 1.25P x
40mm - 8 Nm
Moulded
Bobbin
M10
Bush
1 Assemble the M10 Stainless Steel bolt through the moulded bobbin and the Black Anodised Bush.
2 Tighten bolts to the swing arm boss, 8 N/m. DO NOT OVERTIGHTEN.
PADDOCK STAND / BOBBIN SET
PART NO. BA12-10-1-5-GBR-SET
M10 x 1.5P x
40mm - 8 Nm
Moulded BobbinM10 Bush
www.GBRacing.eu
DO NOT use these products unless you agree to our Terms & Conditions, as shown on our paperwork and website. If you do not agree, please return the product(s) to your dealer for a refund.

FITTING INSTRUCTIONS
TO BE FITTED BY A QUALIFIED TECHNICIAN
PADDOCK STAND BOBBINS All Models
PADDOCK STAND / BOBBIN SET
PART NO. BA12-6-RSV4-GBR-SET
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
1 x Moulded Paddock Stand / Bobbin
1 x M6 x 40/50 Bolts
1 x M6 Washer
1 Assemble M6 x 40mm Bolt & M6 Washer for the
right hand side through the moulded bobbin.
2 Assemble M6 x 50mm Bolt & M6 washer for the
left hand side through the moulded bobbin.
This is to allow for the retment of the original lower chainguard.
3 Tighten bolts to swing arm boss, 8 N/m.
www.GBRacing.eu
DO NOT use these products unless you agree to our Terms & Conditions, as shown on our paperwork and website. If you do not agree, please return the product(s) to your dealer for a refund.