GCC Technologies LaserPro C180II User manual

4F-1, 236, Fu-Te 2
nd
Rd., His Chih,
Taipei Hsien, 221, Taiwan
TEL:[phone] ٠2694-6687
FAX:[phone] ٠2694-5097
C180 II Control Panel Changing
Process
Version: 1.0
May 20, 2014
All manuals and user guides at all-guides.com
all-guides.com

1
Revision History：
Version
Date Page CONTENTS
1.0 May, 20 2014
First release
All manuals and user guides at all-guides.com

2
1. Dismount two screws on the bottom of side panel (see red arrows below)
2. Dismount two screws of right-front cover (M3 *2)
1
2
All manuals and user guides at all-guides.com

3
3. Dismount 4 screws of back cover (M3 *4)
4. Dismount right window cylinder
3
4
All manuals and user guides at all-guides.com

4
5. Dismount 4 screws of right top cover (where the control panel locates)
5
5
All manuals and user guides at all-guides.com

5
6. Hanging the right top cover to the right side.
7. Dismount 5 screws for cover of control panel and ground cable screw
6
All manuals and user guides at all-guides.com
all-guides.com

6
8. After control panel cover is removed, there are 4 screws needs to be removed and the four
cables (in the red circle). Then the control panel can be removed and changed new one.
All manuals and user guides at all-guides.com