GD Midea Refrigeration Equipment NY1507-15EF User manual

OWNER’S MANUAL
OIL HEATER
MODEL: NY1507-15EF
READ AND SAVE THESE INSTRUCTIONS
Version 1.0 2016
GD Midea Environment Appliances MFG. Co.Ltd.
Attention: Pictures in the IM are for reference only.
No.28, Dong Fu Road, HeSui East Industrial Area, Dong Feng Town,
ZhongShan, GuangDong, China.

IMPORTANT SAFEGUARDS
When using any electrical appliance, basic precautions should always
be followed to reduce the risk of fire, electrical shock and injury to
persons, including the following:
1. Read all instructions before using heater.
2. This heater is hot when in use. To avoid burns, do not let bare skin
touch hot surfaces. Keep combustible materials such as furniture,
pillows, bedding, papers, clothes and curtains at least 3 feet (0.9m)
from the heater. Allow heater to cool before moving and then use the
built-in handle for easy movement.
3. Extreme caution is necessary when heater is used by or near children
and whenever heater is left unattended.
4. Always unplug the heater when it is not in use.
5. Do not operate any heater with a damaged cord or plug, or after the
heater malfunctions, or has been dropped or damaged in any
manner. Return heater to the manufacturer for examination,
electrical or mechanical adjustment, or repair.
6. Do not use heater outdoors. This product is intended for normal
household indoor use only.
7. This heater is not intended for use in bathrooms, laundry areas or
similar moist indoor locations. Never locate heater where it may fall
into a bathtub or other water container.
8. Do not run power cord under carpeting. Do not cover cord with throw
rugs, runners or the like. Arrange cord away from traffic areas and
where it will not be tripped over.
9. To disconnect heater, set controls to OFF, then remove plug from
outlet.
10. Keep this heater clean. DO NOT allow foreign objects to enter any
ventilation or exhaust opening as this may cause electric shock, or
fire, or damage the heater.
11. To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do not use on soft surfaces, like a bed, where openings may
become blocked.
12. A heater has hot and arcing or sparking parts inside. Do not use it in
areas where gasoline, paint, or flammable liquids are used or stored.
13. Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or
injury to persons.
1

14. Warning: In order to avoid overheating, do not cover the heater.
15. Do not use this heater in the immediate surroundings of a bath, a
shower or a swimming pool.
16. The heater must not be located immediately below a socket-outlet.
17. If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person in
order to avoid a hazard.
18. This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
19. Children of less than 3 years should be kept away unless
continuously supervised. Children aged from 3 years and less than 8
years shall only switch on/off the appliance provided that it has been
placed or installed in its intended normal operating position and they
have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children aged from 3 years and less than 8 years shall not plug in,
regulate and clean the appliance or perform user maintenance.
20. CAUTION — Some parts of this product can become very hot and
cause burns. Particular attention has to be given where children and
vulnerable people are present.
21. This heater is filled with a precise quantity of special oil. Repairs
requiring opening of oil-container are only to be made by the
manufacturer or his service agent who should be contacted if there is
an oil leak. When scrapping the heater, follow the regulations
concerning the disposal of oil.
22.
Correct Disposal of this product:
This marking indicates that this product should not be
disposed with other household wastes. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To
return your used device, please use the return and
collection systems or contact the retailer where the
product was purchased. They can take this product for
environmental safe recycling.
2

3
ASSEMBLY INSTRUCTIONS
PART FIGURE
WARNING: IN ORDER TO AVOID OVERHEATING, DO NOT COVER
THE HEATER.
Unpack your heater and find the wheel-holding plate and butterfly nuts
between the fins assemblies.
1. Make sure the heater is unplugged and in the "0" position.
2. Turn the heater upside down.
3. Attach the wheel-holding plates onto the heater as
Fig.1 shows. The U plate is fixed between the last
tow fins and the other one is fixed under metal
control box.
Fix the castors to the vertical axis of both the wheel
holding plates.
4. Insert the butterfly nuts and tighten them securely.
5. Turn the heater upright.
Your heater is now ready to use.
Radiating unit Carry Handle
Cord wrap
Caster assembly
Air Inlet
Air outlet
Power Indicator Light
Power Switch Knob
Thermostat Knob
Air Inlet
Air Inlet
Fan switch

OPERATING INSTRUCTIONS
WARNING: Risk of fire. Do not operate heater without wheel
assemblies attached. Operate heater in upright position only
(wheels on bottom, controls on top). Any other position could create
a hazardous situation. Ensure that the surface beneath the heater is
clean and free of any obstructions. It is not recommended that this
heater be placed on high-pile carpeting or any other surface that
impedes the flow of air underneath the heater.
1. Insert the plug into the suitable wall outlet.
1) Never use the unit in place where floor is not even, make sure
there is nothing flammable or easy deform object within 1 meter
(36 inches).
2) Insert the plug after setting the thermostat to “MIN” position and
setting the power selected switches to “0” position.
3) Do not cover the unit.
4) The heater is suitable for operation on an A.C. electricity supply
having the same voltage as that show on its rating label.
2. Rotate power switch to the "3" position then turn thermostat to the
"MAX" position, at this moment, the unit begins to work, when the
temperature rises to which you are satisfied with, slowly turn the
thermostat counter clockwise until the indicating light of the key for
power choice is out, and the room temperature thus can keep
constant. If you want to raise or lower the room temperature, you can
make another regulation: Turn the thermostat clockwise to raise the
temperature or counterclockwise to lower it.
3. Turbo function
Press the fan switch to “ON” position, the fan heater begins to work
separately and used as a fan heater. The temperature in the room will
rise rapidly.
NOTES:
1) The pilot lamp will be on only if the temperature is below the setting
value of the thermostat.
2) The room must be sealed in good condition, if not, it will not make
good result because of the influx of heat.
3) The outlets of the control chamber must be kept ventilative, if not,
undue move of the thermostat may occur.
4. After use, turn the power switch to the “0” position first, then turn the
thermostat to the “MIN” position, and pull out the power supply plug.
4

5
CLEANING AND MAINTENANCE INSTRUCTIONS
1. The electric heater should be cleaned regularly to wipe out the dust
on the surface of flanges. As this may influence the radiating
efficiency.
2. Disconnect electricity supply and allow radiator to cool, wipe out dust
with a soft damp cloth. Do not use detergent or abrasives.
3. Do not scrap the surfaces of flanges with sharp hard tools, to avoid
surfaces getting rusty, because of damage of the paint coat.
TECHNICAL SPECIFICATIONS
Model No.
NY1507-15EF
Voltage
220-240V AC
Frequency
50Hz
Power
Fan 500W / Low 600W / Middle 900W / High 1500W
SAFETY FEATURES
Thermal cut-off: This heater includes a thermal cut-off that shuts the
heater off if it overheats due to abnormal conditions. If this occurs, turn
the heater off, unplug it, and inspect and remove any objects on or
adjacent to the heater. Allow it to cool for a few minutes, and then plug it
back in and resume normal operation.
Tip-over switch: This heater includes a safety tip-over protection
feature that will shut the heater off in case it is tipped over. If, at any
time, the heater tips over, please put the heater back in the upright
position. The heater will resume its normal operation.