Ge-Tectronic BT LINK 1 User manual

©2009 by ge-tectronic Page: 1

©2009 by ge-tectronic Page: 2
Please read these instructions carefully before installing or using this product and keep the
manual at handy for reference when installing!
1. Guarantee and Liability:
ge-tectronic guarantees that this product is free from material and manufacturing defects under normal usage
conditions. The guarantee period is 2 years from date of invoice. Warranty excludes improper product handling.
This includes among other things, incorrect storage, installation, connection or operation.
To make a warranty claim, please contact ge-tectronic support. Under no circumstances is damage caused by the
installation or use of this device included in warranty, either from the equipment itself or the incorrect installation in
the vehicle. The manufacturers’ requirements for wiring and installation must be followed completely. Damages of any
type are the responsibility of the user/installer.
Dear Customer,
You made a great decision to purchase the ge-tectronic
BT Link 1 endeavours to provide its customers with
stable and reliable products. Therefore every unit goes under extensive functional testing. We thank you for your
purchasing decision and hope that our product fulfils all your expectations.
Should you, nevertheless, experience a problem with our products, please contact ge-tectronic support.
Inhalt
1. Guarantee and Liability Page 2
2. Safety Information Page 2
3. Product Features Page 3
4. General Functional Description Page 3
5. Assembly, Installation and Connection Page 4
6. Operation and Use Page 4 - 6
7. Technical Data Page 7
8. Declaration of Conformity Page 7
2. Safety Information
To avoid damaging this product, the vehicle or audio equipment, please note that:
•The connection and installation of the equipment should be performed only by qualified persons
•Carefully read the instructions before installing or using
•Observe the instructions and keep the manual handy for reference!
Make sure that the normal control functions and operation of the vehicle was not affected by the installation,
especially the brakes and steering. Make sure that the airbag - function was not impaired.
(Make sure that the hands-free adapter cables do not touch any moving parts and also be moved as far away from
the electronics of the vehicle.)
Note the current legal position to use mobile phones while driving.

©2009 by ge-tectronic Page: 3
3. Product Features
The BT Link 1 is a smart and very easy to use solution to make phone calls in the car on only one device, while
the favorite music wirelessly transmitted from a mobile phone, PDA, or MP3 player to a sound system in the
vehicle.
Your phone does not need a cell phone holder and
your MP3 player needs no longer device-specific
adapter cable. With this hands-free-kit you can connect
any Bluetooth®enabled mobile phone, which the
Bluetooth®profile "hands-free” supported.
The special of this hands-free system is the ability to
transmit music at the same time from a mobile phone,
MP3 player or similar device via Bluetooth ® to the
vehicle speakers of the car radio in HiFi stereo
quality.
It can be transmitted from any audio device that
supports Bluetooth®A2DP.
So you can make calls or and transfer music in the car
on BT Link 1 without your cell phone or your audio
player to take in hand.
If a call active the music transfer goes automatically to
break and can be continued by using the BT Link 1
keyboard.
Whether mobile or audio player, you need to pair your
equipment only one time with the Bluetooth® Adapter.
Next time the connection is automatic for the last
paired device.
Despite the ease installation and operation, you need not give up quality. You'll be surprised how easy it is
possible to connect wireless your phone and your audio player to the sound system in your car.
Let us convince you of the clever solution and the captivating quality of sound-transmission.
4. General Functional description
This product is designed as professional Bluetooth® hands-free system with simultaneous Bluetooth® HIFI
receiver function. It is directly connected to FastMute Sonic XL .
Function of key
Key Hands-Free Mode Audio-Player Mode
-accept call
-change to audio-
player mode
-start
-play music
-vioce dial
-softer -jump to previous title
-redial
-louder -jump to next title
-end or reject call -stop
-change to hands-
free mode

©2009 by ge-tectronic Page: 4
5. Assembly, Installation and Connection
It is recommended to have the installation conducted by an authorised specialist garage.
The Bluetooth® hands-free/HIFI Receiver must be installed in the vehicle in accordance with the manufacturer’s
installation instructions. Please observe the aforementioned important installation information!
The keypad should be positioned in the cockpit of the vehicle in such a way that the driver can easily access it
(e.g. adhesive pad).
For safety reasons, it is essential that all cables are fastened in place or concealed behind the panelling.
Insert the plug of the
BT Link 1 in the system- connector of FastMute Sonic XL only while
turned OFF.
For optimum performance, position the panel in the direct-speaking-direction of driver.
We recommend installation in the middle of the dashboard.
Avoid the installation near the air vents outlets.
Please follow the instructions manual of FastMute Sonic XL !
6. Operation and Use
Coupling the mobile cellular phone with the Bluetooth® handsfree unit
To be able to operate the mobile cellular phone with the handsfree unit, this must be registered on the
BT Link 1
(the devices have to get to know each other – coupling).
To do this, switch on your FastMute
Sonic XL . The BT Link 1 is switched on by turning on the ignition.
After the very first switch-on the status display slowly flashes red after approx. 5 seconds and the
BT Link 1 is
in coupling mode, i.e. the adapter waits for a coupling with a Bluetooth® mobile cellular phone.
The “search for Bluetooth® devices“ and the coupling with the
BT Link 1 must be initiated in the menu control of
the mobile cellular phone. To do this, please refer to the operating instructions for your mobile cellular phone.
During the coupling process you will be asked to enter a PIN.
The PIN for the
BT Link 1 is “0000”.
The successful coupling with a Bluetooth® mobile cellular phone is indicated by red LED and acoustically (- high
tone – low tone – high tone -) the
BT Link 1 then changes to standard mode. Now calls can be made and taken
in.
Finding the MP3 source on the HiFi-receiver connected to
BT Link 1
To connect an audio device with the HiFi-receiver, it first has to be registered with the receiver (i.e. the devices
must locate or 'find' each other - coupling).
The
BT Link 1 unit must be switched on and if connected to a mobile telephone, it should be in hands-free
mode (preferably it should not be connected at all). The locating procedure is performed by the audio device.
The password for the
BT Link 1 hi-fi receiver is “0000“.
Once the devices have found each other, it is possible to set up the connection between the HiFi-receiver of the
BT Link 1 and the audio device. The green-lit LED indicates that the Audio Player mode is activated.
The
BT Link 1 is now able to receive the audio data from the MP3 source and feed it to the car speaker.
Should you wish to add a further audio device, it is first necessary to terminate the connection with the existing
audio device. You should then repeat the device location procedure, as described above.

©2009 by ge-tectronic Page: 5
Resetting the
BT Link 1
You can completely reset (delete) the
BT Link 1 by pressing all four keys at the same time. It
then changes between headset and hands-free profiles and subsequently switches to coupling mode (the status
LED slowly flashes red).
Hands-Free Mode
After switching on the
BT Link 1 it will always automatically establish a connection to the device that was
coupled first. If this is not possible (because the first coupled device can’t be found) the device switch back to
couple-mode.
In the hands-free mode the keys have the following functions:
Button :
• Accept incoming calls
• Change to Audio Player- Mode
Button :
• End call
• reject an incoming call
Button :
• Adjust volume (only activ during phone calls)
If the mobile phone feature “Remote Volume Control” is supported, the volume can be set on the phone.
The volume level is automatically stored in the free kit.
Button :
Support for this property is dependent on mobile phone.
• Automatic redial of the last dialled telephone number
Button :
Support for this property is dependent on mobile phone.
• Commence call – activate voice-activated dialling in mobile phone.
Button simultaneously:
• Reset the Bluetooth® hands-free unit
• Delete the coupled devices
With an existing Bluetooth® connection a call can either be initiated via the voice control of the mobile cellular
phone (refer to description of mobile cellular phone) or by directly entering a telephone number.

©2009 by ge-tectronic Page: 6
Audio Player- Mode
When it is switched on, the HiFi-receiver does not automatically set up a connection to the previously connected
audio device. The device must first be activated by pressing the button on the operating panel.
In Audio Player mode, the buttons on the operating panel have the following functions:
Button :
• Start (begin playback)
Button :
• Stop (stop playback)
• Change to hands-free mode
Button :
This function is only active during playback (i.e. not in Stop mode)
• Jump to next title
Button :
This function is only active during playback (i.e. not in Stop mode)
• Jump back to beginning of title or to previous title
LED status display
Status LED Meaning
Short orange blinking Hands-Free unit not connected
Red Hands Free-Mode
Red illuminated, orange blinking Device in Hands-Free Mode and connected with an
audioplayer
Green Audio Player - Mode
Green illuminated, orange blinking Device in Audio Player Mode and connected with an
mobil phone

©2009 by ge-tectronic Page: 7
7. Technical Data
Transmitting frequency: 2.402 GHz to 2.480 GHz
Range: Up to 20 metres
Bluetooth PIN: 0000
Housing: Anthracite housing
Dimensions (LxWxH): 40x25x11.8 mm Weight: 20 Grams
Bluetooth®-interface
Supported Bluetooth® profiles:Hands-Free Profile, A2DP and AVRCP
Transmitting power: up to 4 dBm output
Interface Symmetrical – asymmetrical audio and microphone lines
Control line – audio enable Stereo Line-Out
Bluetooth® certification
Bluetooth® certification in accordance with the Bluetooth® specification 2.0
Authorisations CE 0681; e1 022917
KBA as defined by 95/54-EU (motor vehicle guideline)
EN 300328-2 (radio) ; EMC-EN 301489-1/-7/-17
EN 60950 (safety) ; R&TTE(EU)
Usable Bluetooth® Devices
Generally all mobile cellular phones with Bluetooth® hands-free profile and Audio Player with A2DP
8. Declaration of Conformity
The company ge-tectronic - Robert Geierstanger
declares in its sole responsibility that the product:
BT Link 1 to which this declaration refers,
conforms to the standards or standardising documents mentioned above.
Copyright Warning:
Bluetooth and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc., U.S.A.
and licensed to ge-tectronic in Germany.
Registered trademarks and product names of third party suppliers are recognised as such and are copyright of the respective companies.
Reproduction or duplication of this document, as well as further use, is not permitted without prior written permission. Damages will be pursued
for illegal use. All rights are reserved.

©2009 by ge-tectronic Page: 8
.