GE Cync CPLGOD2BLG1 User manual

Simple Setup
G)
Identify whereyou
want to mount your
plug.
Mark the location for
hole to be drilled. Using 15/6~" bit, drill
holein wall for
mountingscrew.
( __ ) ■ I
© I
Insert anchor and install screwin
desired location leaving 3/16" of the
screwexposed.
X X
Align mounting hole with screwhead,
slide the bracket over the screw
head and let the plug drop down to
lock into place.

Mount Plug Vertically
with Sockets Facing Downwards
I I I I
• •
Minimum
distance to ground:
12 inches

Set Up and Enable Voice
and Out of Home Control
CD
Plug your Outdoor SmartPlug into
the outlet .
I I I I
• •
Add the Outdoor Smart Plug to the
CYNC app .Tip: If your Outdoor
Smart Plug has trouble connecting
to Wi-Fi, make sure you are using
your router's2.4GHz band.
....... +( 1.1
1.1)
-
Download the CYNC app.
Minimum operating system
requirements:Android™ 8 or higher
or iOS 14 or higher
.,
Control with voice using Amazon
Alexa or Google Assistant by
enablingCYNC within your voice
assistant app and finding your
device.
Voila! Now you can control your
outdoor lights and deviceswith
your voice and away from home .

Control Your Smart Plug
Using YourVoice
Connect with your Google Assistant or Amazon Alexa
device to control your outdoor lights and devices with
.
vour voice.
I
Try these voice commands:
Amazon Alexa
Alexa, turn off front yard.
Alexa, good morning.
Alexa, turn on patio lights.
Google Home
HeyGoogle, turn on fountain.
HeyGoogle, turn off Christmas lights.
HeyGoogle, turn on party scene.

LED On/Off
Indicators Buttons

G) Hold the housing.
@ Pull out the plug.

Additional Information and Warnings
FCC Compliance Statement Compliance Notice:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of FCC rules. Operation is subject to the
following two conditions:
l. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.

This device complies with Industry Canada's license-exempt RSSs. Operation is
subject to the following two conditions:
1. This device may not cause interference;
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
Le present appareil est conforme aux CNR d'lndustrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisee aux deux
conditions suivantes :
1. l'appareil ne doit pas produire de brouillage,
2. l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi,
meme si le brouillage est susceptible d'en compromettre le fonctionnement.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20cm between the radiator and any part of your body.
Pour se conformer aux exigences de conformite CNR 102 RF exposition, une
distance de separation d'au mains 20 cm doit etre maintenue entre l'antenne de
cet appareil ettoutes les personnes.

A WARNING: Electric Shock.
To reduce the risk of electric shock, this product is equipped with a cord
having grounding type plug. This plug must be plugged into an outlet that is
properly installed and grounded. Contact a qualified electrician to install a
proper outlet if doubt exists as to whether the product is properly grounded.
Do not change the plug in any way.
• When not in use, the sockets should remain capped with the
weather-resistant cover.
• Mount vertically with the sockets facing downward and be at
least 30cm above ground level.
• To remove a plug from outdoor plug, hold outdoor plug's
housing and pull the plug out.
Outdoor Smart Plug
CPLGOD2B LG1
Input: 120V AC 60Hz
Output:
General use, maximum 15A in total
Motor, maximum 1/3HP
Operation temperate: -20°C -S0°C
IP6Le
Rainproof
Type 3R Enclosure
Type 1 action
Pollution Degree 3
Rated impulse voltage: 1500V
The supply cord of this control can be replaced only by the manufacturer or
his accredited service agent.